Digital Commons Network^™

An Application Of Fuzzy Logic In Urban Traffic Incident Detection, Feda Wasfi Fayez Mustafa

Theses

Traffic congestion in urban areas is an increasing problem around the world. Traffic incidents (such as accidents) are considered as the major source of traffic congestion. Traffic incidents have negative impacts on traffic flow, air pollution and fuel consumption. As a result, increasing interest in finding new techniques to deal with this issue has been shown. Traffic incident-management systems can decrease the effect of such events and keep roads capacity as close as possible to normal levels. Incident detection system is an important part of any incident management system. This thesis proposes a new approach to incident detection in urban …

Numerical Validation Of Cooling Performance Of Phase Change Materials Integrated Into Heat Sinks For Electronics Cooling, Shaimaa Mohamed Abu Ayyan

Theses

This study aims to analyze the cooling performance of phase change materials (PCMs) integrated into metallic heat sinks (HSs) both experimentally and numerically. For the experimental part of the study, a test setup has been constructed to test PCM integrated heat sinks. The heat sinks are prepared as metallic containments having fins with fixed inter-fin spacing. The volume between the heat sink fins is filled with PCM namely: a paraffin wax, salt hydrate-calcium chloride and milk-fat, then the whole system is sealed for testing under various heat loads at 4W, 6W, 8W and 10W. Four modes of operation are experimentally …

Accelerated Fog Removal From Real Images For Car Detection, Rawan Ibrahim Khader Younis

Theses

Image de-hazing improves the visual quality of images in computer vision applications, such as object detection and object tracking. Fog removal from car photos taken by street cameras is considered essential to accurate car detection. An accelerated image enhancement technique is presented for car detection as part of an effort to count cars using existing street cameras for the purpose of traffic management. Two aspects of car detection are tackled: 1) An existing image fog removal technique is accelerated by replacing a time consuming image filter with a faster filter while maintaining negligible image degradation, 2) A quick and practical …

Hierarchical Control Strategies For Heaving Wave Energy Converters, Omsalama Mubarak Mohamed Saeed

Theses

This thesis concerned with developing control strategies for a heaving sea wave Energy converter. The objective of this study is to improve captured and converted. Power. In heaving wave energy converters using a robust hierarchical control strategy. This strategy consists of higher and lower hierarchical controller. The higher controller provide a reference velocity signal, whereas the lower one follows the reference despite the uncertainties in the model. In this thesis, two novel methods for the higher controller are proposed. The objective of the first method is to design the intrinsic resistance that maximizes the captured power while considering the constraint …

A Game-Based Learning Model, Fatmah Mohamed Ali Ramsi

Theses

The purpose of this research is to design a conceptual model and develop an implementation as a proof of concept of game-based learning (GBL)to support linguistic skills acquisition. Our model lays the foundations of game-based learning by defining methods, processes, and procedures to support the development of game-based learning systems. Integration of learning and gameplay raises various issues, among them the learning process, learning content, and game characteristics. Language competency is fundamental to academic and social success. Vocabulary acquisition is a primary basis for language competency. Word lists and dictionaries have been used as a resource to enrich vocabulary. The …

Designing Eye Tracking Algorithm For Partner-Assisted Eye Scanning Keyboard For Physically Challenged People, Zeenat S. Al-Kassim

Theses

The proposed research work focuses on building a keyboard through designing an algorithm for eye movement detection using the partner-assisted scanning technique. The study covers all stages of gesture recognition, from data acquisition to eye detection and tracking, and finally classification. With the presence of many techniques to implement the gesture recognition stages, the main objective of this research work is implementing the simple and less expensive technique that produces the best possible results with a high level of accuracy. The results, finally, are compared with similar works done recently to prove the efficiency in implementation of the proposed algorithm. …

Shear Behavior Of Steel-Fiber Reinforced Ultra-High-Strength Self-Compacted Concrete Beams, Omar Jum’Ah Za’Al Al Rawashdeh

Theses

Ultra-high-strength concrete is a new class of concrete that has been the result of the progress in concrete material science and development. This new type of concrete is characterized with very high compressive strength; about 100 MPa. Ultra-high strength concrete shows very brittle failure behavior compared to normal-strength concrete. Steel fibers will significantly reduce the workability of ultra-high strength concrete. The development and use of self-compacting concrete has provided a solution to the workability issue. The combination of technology and knowledge to produce Ultra-High strength fiber reinforced self-compacting concrete was proved to be feasible. Few studies investigated the effect of …

An Exploration Of The Effects Of Enhanced Compiler Error Messages For Computer Programming Novices, Brett A. Becker

Theses

Computer programming is an essential skill that all computing students must master and is increasingly important in many diverse disciplines. It is also difficult to learn. One of the many challenges novice programmers face from the start are notoriously cryptic compiler error messages. These report details on errors made by students and are essential as the primary source of information used to rectify those errors. However these difficult to understand messages are often a barrier to progress and a source of discouragement. A high number of student errors, and in particular a high frequency of repeated errors – when a …

A Two-Stage Fuzzy Logic Model For Urban Traffic Signal Control And Management., Nada Bakri Alnaser

Theses

Different traffic signal control systems are applied nowadays. They vary in complexity and approach but mostly aimed at improving the intersection level of service and the efficiency of the traffic network. Fuzzy Logic Models (FLM) have been widely regarded as quite appealing for real-time applications, in addition to their explicit considerations for stochasticities or uncertainties of traffic measures. The majority of the FLMs for signal control were developed to handle isolated intersections in specific. Very few of these FLM systems explicitly account for neighbor intersections’ traffic impact on the decisions to be made at the underlying intersections.

The aim of …

Effective Node Clustering And Data Dissemination In Large-Scale Wireless Sensor Networks, Mariam Saeed Ai Nuaimi

Theses

The denseness and random distribution of large-scale WSNs makes it quite difficult to replace or recharge nodes. Energy efficiency and management is a major design goal in these networks. In addition, reliability and scalability are two other major goals that have been identified by researchers as necessary in order to further expand the deployment of such networks for their use in various applications. This thesis aims to provide an energy efficient and effective node clustering and data dissemination algorithm in large-scale wireless sensor networks. In the area of clustering, the proposed research prolongs the lifetime of the network by saving …

Shear Strengthening Of Reinforced Concrete Beams Using Textile-Reinforced Mortar, Oluwafunmilayo Morenike Awani

Theses

The effectiveness of using carbon textile-reinforced mortar as an innovative technique to improve the shear response of reinforced concrete beams has been investigated. The research comprised double-shear bond testing on bond behavior of textile-reinforced mortar, large-scale beam testing on shear response of reinforced concrete beams strengthened with textile-reinforced mortar, and nonlinear finite element modeling of the tested beam specimens. Test variables of the double-shear bond testing were the matrix type, and width/length of the bonded area, whereas for the large-scale beam testing, the variables included the number of textile-reinforced mortar layers, matrix type, and amount of internal stirrups. Results of …

Seismic Behavior Prediction Of Concentrically Braced Steel Frames, Hani Mohamed Mayez Akkari

Theses

Concentrically braced steel frames (CBFs) are efficient and commonly used steel systems for resisting seismic loads through a complete truss action. In strong earthquake events, multi-storey concentrically braced steel frames (CBFs) are prone to form a storey-collapse mechanism after buckling and yielding of the braces in a storey. This thesis evaluates the seismic performance of steel concentrically braced frames (CBFs) in Abu Dhabi, UAE. The aim of this study is to assess the overall lateral capacity of multi-storey buildings and the associated sequence of formation of plastic hinges using inelastic pushover analysis technique. The time history analysis approach is employed …

Treatment Of Greywater Using Bio Filtration And Permeable Pavement Systems, Assem Mahn El-Ashkar

Theses

Municipal wastewater can be divided into two categories, greywater and black water. Greywater occupies about 75% of total wastewater and are relatively less polluted than the black water. Reuse of greywater is becoming popular in many arid and semiarid regions in order to reduce the municipal water demand. They can be reused for groundwater recharge, landscape irrigation and for toilet flushing. However, the main challenges are their collection, storage and selection of the appropriate treatment system. The United Arab Emirates (UAE) is located in a hyper arid region, having an annual average rainfall of less than 100 mm. Reliable survey …

Modeling The Controlled Delivery Power Grid, Vinit Madhukar Sahasrabudhe

Theses

Competitive energy markets, stricter regulation, and the integration of distributed renewable energy sources are forcing companies to reengineer energy production and distribution. The Controlled Delivery Power Grid is proposed as a novel approach to transport energy from generators to consumers. In this approach, energy distribution is performed in an asynchronous and distributed fashion. Much like the Internet, energy is delivered as addressable packets, which allow a controlled delivery of energy.

As a proof-of-concept of the controllable delivery grid, two experimental test beds, one with integrated energy storage and another with no energy storage, were designed and built to evaluate the …

Effect Of Endplate On The Blast Wave Profile In A Compressed Gas Shock Tube, Sudeepto Kahali

Theses

Blast related brain injuries are commonly encountered in the recent wars of Iraq and Afghanistan increased use of improvised explosive devices (IEDs). An estimated 20% of veterans returning from these operations have suffered traumatic brain injuries (TBI). The mechanisms and long-term effects of the injury are not fully understood, and extensive research effort is being focused toward identifying the mechanisms of primary blast injury. When a pure shock-blast wave encounters a subject, in the absence of shrapnel, casing or gaseous products, the loading is termed as primary blast loading, and its effects can be studied using shock tubes.

The wave …

Hand Operated Tabletop Letterpress Assembly Instructions 1.0, George Chiu, Brendan Domos, Spencer Herzog, Nathan Sandidge, Kevin Weinstein

Theses

A group of RIT Mechanical Engineering students spent the 2014-2015 academic year in their senior design class collaborating with the RIT Cary Graphic Arts Collection to design and fabricate a 21st century hand-operated platen press.

The press that was designed during this engineering exercise met several requirements:

• be under 30 lbs
• fit in a 24 inch square table top space
• be manufactured with a majority of components which could be purchased from a standard parts supplier
• be able to print with commonly manufactured ink rollers, ink, letterpress chases, spacing and furniture
• the platen and packing had to be adjustable to …

Experimental Evaluate Gas Separation Using Ranuehilsch Vortex Tube, Ali Salah Omar Owiemer Omar Owiemer

Theses

Through experimental investigation, this study is offering a closer look into the performance of the vortex tube energy separation and a better understanding of the effect of the vortex tube length, diameter and internal tapering angle on the energy separation. Also the study addresses the effect of inlet pressure on the performance of the vortex tube and the effect of different working fluids (Air, H2 and O2). The vortex tube is a thermal static tube that was discovered by the French scientist George Ranque in 1933 and it is used to separate compressed gas flow into two different streams: one …

Processing And Characterization Of Graphene And Graphene On Silicon, Cheng Peng

Theses

Graphene has become a promising material for applications in many areas including electronic devices, batteries and space crafts. Although it has a bright future, the commercial production of graphene has not yet been realized. In this thesis, an overview of the properties and applications of graphene is presented. The early research of preparing graphene and its composites is summarized, which gives the basis to synthesize graphene and improve the process. In this study, graphene oxide (GO) and graphene have been successfully made using graphite; graphene layer has been coated on the surface of a silicon wafer. The resulting specimens are …

An Extended Duration Operation For Solid Hollow Fiber Cooling Crystallization Method, Chi Jin

Theses

As recently demonstrated by Chen et al. [1], the solid hollow fiber cooling crystallization method to achieve continuous polymer coating/encapsulation of submicrometer particles, has advantages of no problem with high pressure, easy scale-up and production of free-flowing coated particles. There is a concern whether this crystallization method can be applied for an extended duration coating process; it was not investigated in the previous study. Therefore, in order to examine this problem, in this work, the duration of the whole crystallization coating process has been greatly extended from 5 min to 60 min and 120 min. For the purpose of being …

Principles And Applications Of Mechanical Dry Coating - Review And State-Of-The-Art, Sayani Bhaumik

Theses

Dry Coating of powders to form composite particulates has been firmly established and has garnered interest both in academia and industry due to its myriad applications. This thesis work is an attempt to map the progress of the dry coating technology from its incipient years in the '80s to the thriving practice in the present day. Dry coating is a relatively simple approach to coat powders with specific guest particles via mechanical means to produce composites with desired tailor-made properties, without the constraints of harmful emissions or huge capital investment. Composite particulates with enhanced flowability, high-temperature resistant properties, and modified …

Computational Studies Of Electronic Structure Of Doped Graphene, Yan Chu

Theses

In the literature, extensive studies have been performed to study the electronic properties of doped graphene. This is due to the potentially large number of applications of graphene in p-n junctions, transistors, photodiodes and lasers. By utilizing single heteroatom chemical doping method or electric field-induced method, one can introduce a band gap, ranging from 0.1eV to 0.5eV, in graphene. A tunable bandgap is highly desirable because it would allow significant flexibility in the design and optimization of such devices, particularly if it could be tuned by adjusting the doping configurations. Here, we demonstrate the realization of a widely tunable electronic …

Modeling Of Electrical Behavior Of Graphene-Based Ultracapacitors, Patrick Dzisah

Theses

Graphene has been identified as a promising material for energy storage, especially for high performance ultracapacitors. Graphene-based ultracapacitors show high stability, significantly-improved capacitance and energy density with fast charging and discharging time at a high current density, due to enhanced ionic electrolyte accessibility in deeper regions. The surface area of a single graphene sheet is 2630 m2/g, substantially higher than values derived from Brunauer Emmett Teller (BET) surface area measurements of activated carbons used in the current electrochemical double layer capacitors.

In an ultracapacitor cell, chemically modified graphene (CMG) materials demonstrate high specific capacitances of 135 and 99 F/g in …

Structural Health Monitoring Of Bridges Using Wireless Sensor Networks, Seyed Behrad Ghazi Sharyatpanahi

Theses

Structural Health Monitoring, damage detection and localization of bridges using Wireless Sensor Networks (WSN) are studied in this thesis. The continuous monitoring of bridges to detect damage is a very useful tools for preventing unnecessary costly and emergent maintenance. The optimal design aims to maximize the lifetime of the system, the accuracy of the sensed data, and the system reliability, and to minimize the system cost and complexity

Finite Element Analysis (FEA) is carried out using LUSAS Bridge Plus software to determine sensor locations and measurement types and effectively minimize the number of sensors, data for transmission, and volume of …

Thermal Properties Of Graphene, Vishal Vijay Nakhate

Theses

The two-dimensional (2D) monolayer structure of carbon atoms were initially considered as unstable. The 2D materials have recently been discovered and many researchers have started analyzing these materials. Graphene, a two-dimensional allotrope of graphite with sp2 bonded carbon atoms, is arranged in honeycomb structure. Graphene has excellent thermal conductivity and can be considered as a potential material for applications in the electronics industry where heating of materials is a serious concern.

In this study, thermal properties of p and n doped graphene nanosheets and nanoribbons are studied as function of percentage composition of the dopants and the direction of dissipation …

Tendon Reflex Protocol For Exploring The Mechanisms Associated With Whole Body Vibration, Ikechukwu Okeke

Theses

Whole body vibration (WBV) machines have in recent years been widely used as rehabilitation equipment. Whole body vibration has been shown to have positive effects on muscle response. Cerebral palsy (CP) is a neurodevelopmental condition that includes a group of non-progressive, but often changing, motor impairment syndromes arising in the early stages of human development. The aim of this project was to design a protocol and related instruments to assess the tendon reflex in response to WBV. Both a press pedal used for measuring the force exerted by the foot and a hammer used for measuring the stimulating force were …

Behavior Of Deformed Dermal Fibroblasts Seeded On A Silicon Membrane Under High Levels Of Strain, Laura Osorno

Theses

The main objective of this thesis is to understand, from a molecular perspective, the morphological and functional abnormalities of human dermal fibroblasts as a response to deformation produced by a normal force that can lead to the potential formation of stretch marks in pregnant women, adolescents, and people with Cushing's syndrome. The main function of dermal fibroblasts is to produce the essential fibrous components of the extracellular matrix (ECM) of the skin.

In order to study the mechanism of stretch mark formation, neonatal human dermal fibroblasts were seeded on a silicon membrane for controlled deformation. Upon reaching a confluence of …

Experimental Determination Of The Agitation Requirements For Solids Suspension In Dissolution Systems Using A Mini Paddle Apparatus, Yang Song

Theses

Dissolution testing is a critical step in quality control of manufactured final products in the pharmaceutical industry. The United State Pharmacopeia (USP) Dissolution Testing Apparatus 2 (paddle) is the most widely used dissolution test devices in the pharmaceutical industry to formulate solid drug dosage forms and to develop quality control specifications for its manufacturing process.

Mini vessels and mini paddle dissolution testing systems are smaller versions of the USP 2 Apparatus. The concept of the mini paddle apparatus is similar to that of the USP 2 setup but it is scaled down about to 1/5 of the volume and 40% …

Effect Of Impeller Submergence On Power Dissipation And Solids Suspension In Mixing Systems Equipped With Pitch-Blade Turbines, Yufeng Song

Theses

Mixing and dispersion of solids in a liquid is a process frequently encountered in the pharmaceutical industry and often conducted in cylindrical baffled tanks stirred by mechanical impellers. In operations where the liquid level is decreased (as often which emptying the tank) the process must be stopped when the solids are no longer suspended. In this work, the minimum agitation to suspend solids (Njs) when the liquid level was lowered, and the impeller submergence S_b changed as a result were determined for the case of a six-blade, pitch-blade turbine (6-PBT) impeller. The power consumed by the impeller …

Ultracapacitors For Off Grid Wind Power Systems, Hans Tanis

Theses

The main reason for wind turbine to be not as prevalent as traditional power systems is because they do not have an effective storage capacity. However, researchers in material science and engineering have found ways to resolve this problem by developing “ultracapacitors” that store energy by assembling ions at the surface of a porous material. That is why ultracapacitors coupled with the energy storage battery could present a challenge to the electrical power grid. Such a design allows ultracapacitors to charge in matter of minutes and not hours. This innovation would create a significant impact on electronic items such as …

Design, Construction And Characterization Ofa Magnetic Augmented Rotation System (Mars) Based Wind Turbine, Da Li

Theses

Magnetic Augmented Rotation System (MARS) works by magnetic field coupling, to transfer torque from the driver to the rotor without contact. This characteristic has significant applications to the wind turbine but research in combination of MARS and wind turbine has not been done in the literature. In this thesis, a small-scale wind turbine is designed, built and characterized in a prototype wind tunnel. The test results are analyzed and computer-aided software simulation is used as an auxiliary method to understand the mechanism of MARS. The power coefficient of this new wind turbine is estimated to be about 40%. The “gear …