Digital Commons Network^™

Investigation And Improvement Of The Conveyor System At A Bottle Packaging Operation., Dirk Lee Fugate

Electronic Theses and Dissertations

This investigation examines the bottle packaging conveyor system and its impact on the overall efficiency at a bottle packaging plant in Anderson, South Carolina. The purpose of this study is to demonstrate the existing opportunity to reduce bottle unit cost, increase productivity, decrease the risk of work related injuries, and improve line reliability along with employee moral with the conveying system alone.

Data was gathered for this study in three ways: One, bottle packaging line lead operators were required to document the start and stop times of the conveyor system on their respective lines for six weeks. Two, a conveyor …

An Analysis Of The Conventional Wire Maintenance Methods And Transition Wire Integrity Programs Utilized In The Aviation Industry., Susan Jeruto Kiptinness

Electronic Theses and Dissertations

Aging aircraft wiring poses a significant threat to both commercial and military aircraft. Recent air disasters involving aging aircraft wiring have made it clear that aging wiring can be catastrophic. Aging of an electrical wiring system can result in loss of critical functions of equipment or loss of information regarding equipment operation. Either result can lead to an electrical failure causing smoke and fire, consequently being a danger to public health and aircraft safety.

Conventional maintenance practices do not effectively manage aging wiring problems. More proactive methods are needed so that aircraft wiring failures can be anticipated and wiring systems …

Gloss Development Of Spray-Coated Systems, Aaron W. Clark

Electronic Theses and Dissertations

A spray-coated system involves any substrate on which a liquid coating is applied in a drop-wise fashion. Inkjet printing is the controlled application of drops to print a surface and is the focus of this work. The gloss of the printed substrate is an important attribute of print quality. Print gloss depends on a number of factors, such as ink and media properties. Non-uniform gloss in different regions of a printed image can cause a decrease in quality of a printed sample. However, a good understanding of the gloss development of spray-coated systems is not available in the literature. Several …

Evaluation Of The Potential Benefits To Traffic Operations At A Toll Plaza With Express Etc Lanes, Eric Anthony Gordin

Electronic Theses and Dissertations

The effectiveness of modifying a conventional toll plaza for implementation of an open road tolling concept with express ETC lanes was evaluated in this thesis. Speed controlled dedicated ETC lanes were replaced with express ETC lanes at the Orlando-Orange County Expressway Authority (OOCEA) University Mainline Toll Plaza. This evaluation was accomplished by utilizing collected field data and simulated scenarios using Toll Plaza SIMulation (TPSIM) software developed by the University of Central Florida. The speed controlled dedicated ETC lanes were located within toll lanes (contained within a toll plaza canopy) with widths ranging between 10 to 14 ft. These types of …

Techniques For Assessing And Improving Performance In Navigation And Wayfinding Using Mobile Augmented Reality, Brian Goldiez

Electronic Theses and Dissertations

Augmented reality is a field of technology in which the real world is overlaid with additional information from a computer generated display. Enhancements to augmented reality technology presently support limited mobility which is expected to increase in the future to provide much greater real world functionality. This work reports on a set of experiments that investigate performance in search and rescue navigating tasks using augmented reality. Augmentation consisted of a spatially and temporally registered map of a maze that was overlaid onto a real world maze. Participants were required to traverse the maze, answer spatially oriented questions in the maze, …

Partitioning A Graph In Alliances And Its Application To Data Clustering, Khurram Hassan-Shafique

Electronic Theses and Dissertations

Any reasonably large group of individuals, families, states, and parties exhibits the phenomenon of subgroup formations within the group such that the members of each group have a strong connection or bonding between each other. The reasons of the formation of these subgroups that we call alliances differ in different situations, such as, kinship and friendship (in the case of individuals), common economic interests (for both individuals and states), common political interests, and geographical proximity. This structure of alliances is not only prevalent in social networks, but it is also an important characteristic of similarity networks of natural and unnatural …

Failure Mode Identifications Of Rc Beams Externally Strengthened With, Chris O'Riordan-Adjah

Electronic Theses and Dissertations

The application of carbon reinforced-fiber polymers (CFRP) to structures is a new development that is still under intense research. However, the rehabilitation or retrofit of damage reinforced concrete members by the external bonding of CFRP is becoming increasingly popular in the construction industry. The objective of the tests presented in this thesis is to study different CFRP designs on the reinforced concrete beams and compare their failure modes. The main goal is to determine the CFRP design on the reinforced concrete beams that result in a progressive and gradual failure mode with enough warning before final failure. Different CFRP designs …

Evaluation Of A Microwave Radiative Transfer Model For Calculating Sat, Simonetta Thompson

Electronic Theses and Dissertations

Remote sensing is the process of gathering and analyzing information about the earth's ocean, land and atmosphere using electromagnetic "wireless" techniques. Mathematical models, known as Radiative Transfer Models (RTM), are developed to calculate the observed radiance (brightness temperature) seen by the remote sensor. The RTM calculated brightness temperature is a function of fourteen environmental parameters, including atmospheric profiles of temperature, pressure and moisture, sea surface temperature, and cloud liquid water. Input parameters to the RTM model include data from NOAA Centers for Environmental Prediction (NCEP), Reynolds weekly Sea Surface Temperature and National Ocean Data Center (NODC) WOA98 Ocean Salinity and …

Circuit Design And Reliability Of A Cmos Receiver, Hong Yang

Electronic Theses and Dissertations

This dissertation explores CMOS RF design and reliability for portable wireless receivers. The objective behind this research is to achieve an increase in integration level, and gain more understanding for RF reliability. The fields covered include device, circuit and system. What is under investigation is a multi-band multi-mode receiver with GSM, DCS-1800 and CDMA compatibility. To my understanding, GSM and CDMA dual-mode mobile phones are progressively investigated in industries, and few commercial products are available. The receiver adopts direct conversion architecture. Some improved circuit design methods are proposed, for example, for low noise amplifier (LNA). Except for band filters, local …

General Interference Suppression Technique For Diversity Wireless Rece, Tianyu Yang

Electronic Theses and Dissertations

The area of wireless transceiver design is becoming increasingly important due to the rapid growth of wireless communications market as well as diversified design specifications. Research efforts in this area concentrates on schemes that are capable of increasing the system capacity, providing reconfigurability/reprogrammability and reducing the hardware complexity. Emerging topics related to these goals include Software Defined Radio, Multiple-Input-Multiple-Output (MIMO) Systems, Code Division Multiple Access, Ultra-Wideband Systems, etc. This research adopts space diversity and statistical signal processing for digital interference suppression in wireless receivers. The technique simplifies the analog front-end by eliminating the anti-aliasing filters and relaxing the requirements for …

Investigation Of Nascar Restrictor Plate Manifold Insert Using Wave Engine Simulation And Response Surface Methodology, John Mason Gross Iii

Electronic Theses and Dissertations

With the increasing growth in computer processing power, computer based computational fluid dynamics simulations are finding increasing acceptance and use in the field of internal combustion engine development. Once fully developed, such simulations provide detailed and expedient tools for testing existing theories, as well as new ideas. While numerous studies on wave propagation and fluid flow in intakes manifolds exist, most restrict the analysis to a single intake runner and port, examining only the dynamics from the runner-to-plenum junction downstream to the valve. While such analyses provide comprehensive models for wave propagation dynamics in the runner, little is published on …

Decision Support Model For Construction Crew Reassignments, Angela M. Sist

Electronic Theses and Dissertations

The reassignment of crews on a construction project in response to changes occurs on a frequent basis. The factors that affect the crew reassignment decision can be myriad and most are not known with certainty. This research addresses the need for a decision support model to assist construction managers with the crew reassignment problem. The model design makes use of certainty factors in a decision tree structure. The research helped to determine the elements in the decision tree, the appropriate combination rules to use with the certainty factors, and the method for combining the certainty factors and costs to develop …

Expression Morphing Between Different Orientations, Tao Fu

Electronic Theses and Dissertations

How to generate new views based on given reference images has been an important and interesting topic in the area of image-based rendering. Two important algorithms that can be used are field morphing and view morphing. Field morphing, which is an algorithm of image morphing, generates new views based on two reference images which were taken at the same viewpoint. The most successful result of field morphing is morphing from one person's face to the other one's face. View morphing, which is an algorithm of view synthesis, generates in between views based on two reference views which were taken at …

Investigation Of Ground Penetrating Radar For Detection Of Leaking Pipelines Under Roadway Pavements And Development Of Fiber-Wrapping Repair Technique, Pedro F. Suarez

Electronic Theses and Dissertations

Nowadays, it has become a common practice to observe urban roadways undergo severe distress characterized by substantial depressions. In some cases, these pavement depressions are caused by leakages in the connecting joints of sewage pipelines laid beneath the roadway pavement. Manual inspection of pipe leakages has become costly and complex since sewage pipes with relative small diameters do not allow inspection from inside and digging may be required. On the other hand, pipes with large diameters, in which inspection can be made from pipe interior, inspector can not remain inside of the pipe for long periods of time because of …

Conformal Tracking For Virtual Environments, Larry Dennis Davis Jr.

Electronic Theses and Dissertations

A virtual environment is a set of surroundings that appears to exist to a user through sensory stimuli provided by a computer. By virtual environment, we mean to include environments supporting the full range from VR to pure reality. A necessity for virtual environments is knowledge of the location of objects in the environment. This is referred to as the tracking problem, which points to the need for accurate and precise tracking in virtual environments. Marker-based tracking is a technique which employs fiduciary marks to determine the pose of a tracked object. A collection of markers arranged in a rigid …

Toward Building A Social Robot With An Emotion-Based Internal Control, Andreas Marpaung

Electronic Theses and Dissertations

In this thesis, we aim at modeling some aspects of the functional role of emotions on an autonomous embodied agent. We begin by describing our robotic prototype, Cherry--a robot with the task of being a tour guide and an office assistant for the Computer Science Department at the University of Central Florida. Cherry did not have a formal emotion representation of internal states, but did have the ability to express emotions through her multimodal interface. The thesis presents the results of a survey we performed via our social informatics approach where we found that: (1) the idea of having emotions …

Analysis Of Time Synchronization Errors In High Data Rate Ultrawideban, Lakesha Bates

Electronic Theses and Dissertations

Emerging Ultra Wideband (UWB) Orthogonal Frequency Division Multiplexing (OFDM) systems hold the promise of delivering wireless data at high speeds, exceeding hundreds of megabits per second over typical distances of 10 meters or less. The purpose of this Thesis is to estimate the timing accuracies required with such systems in order to achieve Bit Error Rates (BER) of the order of magnitude of 10-12 and thereby avoid overloading the correction of irreducible errors due to misaligned timing errors to a small absolute number of bits in error in real-time relative to a data rate of hundreds of megabits per second. …

Web-Based Circuit Design Simulation Package For Solving Electrical Eng, Shadi Harb

Electronic Theses and Dissertations

A Web-based circuit design package has been improved and evaluated to provide students with an enhanced and innovative teaching tools package for the electrical circuit design course. The project objectives can be summarized as follows: 1) developing enhanced problem solving skills using a Web-based environment, 2) developing the design skills and sharpening the critical thinking process, 3) developing a generic and comprehensive teaching/learning circuit package as an extention to the Electrical Engineering virtual lab environment, which gives students the capability to practice and experience all the circuit design skills with minimum cost and effort. The project provides the students with …

Inverse Boundary Element/Genetic Algorithm Method For Reconstruction O, Mahmood Silieti

Electronic Theses and Dissertations

A methodology is formulated for the solution of the inverse problem concerned with the reconstruction of multi-dimensional heat fluxes for film cooling applications. The motivation for this study is the characterization of complex thermal conditions in industrial applications such as those encountered in film cooled turbomachinery components. The heat conduction problem in the metal endwall/shroud is solved using the boundary element method (bem), and the inverse problem is solved using a genetic algorithm (ga). Thermal conditions are overspecified at exposed surfaces amenable to measurement, while the temperature and surface heat flux distributions are unknown at the film cooling hole/slot walls. …

Reduced Kinetic Mechanisms For Premixedhydrogen-Air-Cf3br Flames, Yi Zhang

Electronic Theses and Dissertations

Halon 1301 (CF3Br), or bromotrifluoromethane, had been widely used as fire-extinguishing agent for many years before its production and consumption were severely regulated by the Montreal Protocol due to its hazardous depletion effect to the stratospheric ozone layer. It is therefore imperative to find an effective replacement fire-fighting agent before the mandated deadline of the complete phase out of CF3Br. Currently there are intensive efforts in searching for an environmentally acceptable fire suppression replacement. This, however, is hampered by a lack of fundamental understanding of how CF3Br suppresses the chemical reactions in a flame environment so effectively. Recent experimental evidence …

Analysis And Integration Of A Debris Model In The Virtual Range Projec, Luis Robledo

Electronic Theses and Dissertations

After the accident of the STS 107 Columbia Space Shuttle, great concern has been focused on the risk associated to the population on the ground. Before this accident happened, re-entry routes as well as risk calculation of were not of public concern. Two issues that have been raised from this lamentable accident relate to spacecraft security and to public safety. The integration of a debris model has been part of the original conceptual architecture of the Virtual Range Project. Its integration has been considered as a specific research due to the complexity of the models and the difficulties to obtain …

Confidence Measure For Dna Base Calling Using A Fuzzy System, Rency Susan Varghese

Electronic Theses and Dissertations

Base calling is the central part of any large-scale genomic sequencing effort. Current sequencing technology produces error rates less than 3.5%. This corresponds to at least 35 errors in a 1000 base read. As the base calling algorithm's error rates drop, the smaller base call errors could be difficult to locate. Hence, assembling algorithms and human operators use a confidence value measure to determine how well the base calling algorithm has performed for each base call. This will clearly make it easier to uncover potential errors and correct them, thus increasing the throughput of genetic sequencing. The model developed here …

An Experimental And Theoretical Investigation Fo Axially Symmetric Wave Propagation In Thick Cylindrical Waveguides, Anthony Puckett

Electronic Theses and Dissertations

Solid circular cylinders as wavaguides for the propagation of longitudinal elastic waves are used pximarily as buffer rods in high temperature nondestructive evaluation (NDE), and are also found in the split Hopkinson pressure bar (SHPB). Experiments are typically designed so that only the nondispersive range of the first mode propagates. Design constraints sometimes require larger wavcguides and higher ficquencies that propagate multiple dispersive modes, which can add considerable con1plexity to the signal. This thesis presents an analytical modcl for multiple mode wave propagation in a finite solid cylindrical waveguide as a means of interpreting the complex signals and possibly removing …

Phenomenology And Experimental Observations In High Temperature Ternary Interdiffusion, Abby Lee Elliott

Electronic Theses and Dissertations

A new method to extract composition dependent ternary interdiffusion coefficients from a single diffusion couple experiment is presented. The calculations involve direct determination of interdiffusion fluxes from experimental concentration profiles and local integration and differentiation of Onsager's formalism. This new technique was applied to concentration profiles obtained from selected semi-infinite, single-phase diffusion couple experiments in the Cu-Ni-Zn, Fe-Ni-Al, and Ni-Cr-Al systems. These couples exhibit features such as uphill diffusion and zero flux planes. The interdiffusion coefficients from the new technique along with coefficients reported from other methods are graphed as functions of composition. The coefficients calculated from the new technique …

Effects Of The Soil Properties On The Maximum Dry Density Obtained Fro, Andres Arvelo

Electronic Theses and Dissertations

In the construction of highways, airports, and other structures, the compaction of soils is needed to improve its strength. In 1933 Proctor developed a laboratory compaction test to determine the maximum dry density of compacted soils, which can be used for specifications of field compaction. The Compaction of soils is influenced by many factors, the most common are the moisture content, the soil type and the applied compaction energy. The objective of this research is the analysis of the maximum dry density values based on the soil classification and characterization. The method of choice in the determination of the maximum …

The Proteomics Approach To Evolutionary Computation: An Analysis Of Pr, Ivan Garibay

Electronic Theses and Dissertations

As the complexity of our society and computational resources increases, so does the complexity of the problems that we approach using evolutionary search techniques. There are recent approaches to deal with the problem of scaling evolutionary methods to cope with highly complex difficult problems. Many of these approaches are biologically inspired and share an underlying principle: a problem representation based on basic representational building blocks that interact and self-organize into complex functions or designs. The observation from the central dogma of molecular biology that proteins are the basic building blocks of life and the recent advances in proteomics on analysis …

Two Dimensional Linear Finite Element Analysis Of Post-Tensioned Beams, Rodolfo Hutchinson

Electronic Theses and Dissertations

The objective of this research project was to create a Finite Element Routine for the Linear Analysis of Post-Tensioned beams using the program CALFEM® [20] developed at the division of Structural Mechanics in Lund University, Sweden. The program CALFEM and our own made files were written in MATLAB, an easy to learn and user-friendly computer language. The approach used in this thesis for analyzing the composite beam consists in embedding the steel tendons at the exact location where they intersect the concrete parent elements, without moving the concrete parent element nodes. The steel tendons are represented as one dimensional bar …

Finite Element Analysis Of Left-Handed Waveguides, Balasubramaniam, Vellakkinar

Electronic Theses and Dissertations

In this work, waveguides with simultaneous negative dielectric permittivity and magnetic permeability, otherwise known as left-handed waveguides, are investigated. An approach of formulating and solving an eigenvalue problem with finite element method resulting in the dispersion relation of the waveguides is adopted in the analysis. Detailed methodology of one-dimensional scalar and two-dimensional vector finite element formulation for the analysis of grounded slab and arbitrary shaped waveguides is presented. Based on the analysis, for waveguides with conventional media, excellent agreement of results is observed between the finite element approach and the traditional approach. The method is then applied to analyze left-handed …

Hybrid And Hierarchical Image Registration Techniques, Dongjiang Xu

Electronic Theses and Dissertations

A large number of image registration techniques have been developed for various types of sensors and applications, with the aim to improve the accuracy, computational complexity, generality, and robustness. They can be broadly classified into two categories: intensity-based and feature-based methods. The primary drawback of the intensity-based approaches is that it may fail unless the two images are misaligned by a moderate difference in scale, rotation, and translation. In addition, intensity-based methods lack the robustness in the presence of non-spatial distortions due to different imaging conditions between images. In this dissertation, the image registration is formulated as a two-stage hybrid …

Stable Spatial Solitons In Semiconductor Optical Amplifiers, Erdem Ultanir

Electronic Theses and Dissertations

A spatial soliton is a shape invariant self guided beam of light or a self induced waveguide. Spatial solitons appear as a result of the balance of diffraction and nonlinear focusing in a system. They have been observed in many different conservative media in the last couple of years. Solitons are ubiquitous, because of the probability of using their interactions in optical data processing, communications etc. Up to now due to the power required to generate the solitons, and the response times of the soliton supporting media, these special waves of nature could not penetrate the applications arena. Semiconductors, with …