Digital Commons Network^™

Study Of Characterization Of Submicron Coal Particles Dispersed In Air And Capture Of Coal Particles By Water Drops In A Scrubbing Column, Utshab Chakravorty

Theses and Dissertations--Chemical and Materials Engineering

Present day water spray based dust removal technologies do not effectively remove respirable submicron coal and silica dust particles in the underground coal mines causing Coal worker’s pneumoconiosis (CWP). The objective of this research was to study the electrostatic charges present in the airborne coal dust in order to develop efficient water spraying based dust removal technology where water drops charged using ionic compounds and surfactants would be used to capture the oppositely charged coal particles. In an experimental scrubbing column, coal particles dispersed in an air stream by a Fluidized Bed Aerosol Generator were captured by water drops sprayed …

A Study Of Queuing Theory In Low To High Rework Environments With Process Availability, Adam J. Brown

Theses and Dissertations--Manufacturing Systems Engineering

In manufacturing systems subject to machine and operator resource constraints the effects of rework can be profound. High levels of rework burden the resources unnecessarily and as the utilization of these resources increases the expected queuing time of work in process increases exponentially. Queuing models can help managers to understand and control the effects of rework, but often this tool is overlooked in part because of concerns over accuracy in complex environments and/or the need for limiting assumptions. One aim of this work is to increase understanding of system variables on the accuracy of simple queuing models. A queuing model …

Transport Phenomena Associated With Liquid Metal Flow Over Topographically Modified Surfaces, Wen Liu

Theses and Dissertations--Mechanical Engineering

Brazing and soldering, as advanced manufacturing processes, are of significant importance to industrial applications. It is widely accepted that joining by brazing or soldering is possible if a liquid metal wets the solids to be joined. Wetting, hence spreading and capillary action of liquid metal (often called filler) is of significant importance. Good wetting is required to distribute liquid metal over/between the substrate materials for a successful bonding.

Topographically altered surfaces have been used to exploit novel wetting phenomena and associated capillary actions, such as imbibitions (a penetration of a liquid front over/through a rough, patterned surface). Modification of surface …

Validation Of Computational Fluid Dynamic Simulations Of Membrane Artificial Lungs With X-Ray Imaging, Cameron Christopher Jones

Theses and Dissertations--Biomedical Engineering

The functional performance of membrane oxygenators is directly related to the perfusion dynamics of blood flow through the fiber bundle. Non-uniform flow and design characteristics can limit gas exchange efficiency and influence susceptibility of thrombus development in the fiber membrane. Computational fluid dynamics (CFD) is a powerful tool for predicting properties of the flow field based on prescribed geometrical domains and boundary conditions. Validation of numerical results in membrane oxygenators has been predominantly based on experimental pressure measurements with little emphasis placed on confirmation of the velocity fields due to opacity of the fiber membrane and limitations of optical velocimetric …

Bisphosphonates And Bone Microdamage, William A. Caruthers

Theses and Dissertations--Biomedical Engineering

Osteoporosis is a significant healthcare issue due to the increasing elderly population. Bisphosphonates are used to treat osteoporosis by reducing the rate of resorption, increasing bone mineral density (BMD) and thereby reducing fracture risk. Long-term bisphosphonate treatment, however, has been associated with low-energy fractures. Bone microdamage may provide a partial explanation for one of the mechanisms responsible for these fractures since it has been shown to reduce bone toughness, fracture resistance, and bone strength. The goal of this study was to quantify the changes in bone microdamage parameters with the duration of bisphosphonate treatment. This study selected, stained, and histomorphometrically …

Protein Based Biomimetic Approachs To Surface Hemocompatibility And Biocompatibility Enhancement, Matthew Thomas Dickerson

Theses and Dissertations--Chemical and Materials Engineering

T. pallidum can survive a primary immune response and continue growing in the host for an extended period of time. T. pallidum is thought to bind serum fibronectin (FN) through Tp0483 on the surface to obscure antigens. A Tp0483 fragment (rTp0483) was adsorbed onto functionalized self-assembled monolayers (SAMs) with FN. FN capture by adsorbed rTp0483 depended greatly on surface chemistry with COO- groups being best for FN binding. Hemocompatibility was determined by analysis of plasma protein adsorption, intrinsic pathway activation, and platelet activation. rTp0483+FN bound an equal or lesser amount of fibrinogen (Fg), human serum albumin (HSA), and factor XII …

Biodegradable Hydrogels And Nanocomposite Polymers: Synthesis And Characterization For Biomedical Applications, Ashley Marie Hawkins

Theses and Dissertations--Chemical and Materials Engineering

Hydrogels are popular materials for biological applications since they exhibit properties like that of natural soft tissue and have tunable properties. Biodegradable hydrogels provide an added advantage in that they degrade in an aqueous environment thereby avoiding the need for removal after the useful lifetime. In this work, we investigated poly(β-amino ester) (PBAE) biodegradable hydrogel systems. To begin, the factors affecting the macromer synthesis procedure were studied to optimize the reproducibility of the resulting hydrogels made and create new methods of tuning the properties. Hydrogel behavior was then tuned by altering the hydrophilic/hydrophobic balance of the chemicals used in the …

Privacy Preserving Distributed Data Mining, Zhenmin Lin

Theses and Dissertations--Computer Science

Privacy preserving distributed data mining aims to design secure protocols which allow multiple parties to conduct collaborative data mining while protecting the data privacy. My research focuses on the design and implementation of privacy preserving two-party protocols based on homomorphic encryption. I present new results in this area, including new secure protocols for basic operations and two fundamental privacy preserving data mining protocols.

I propose a number of secure protocols for basic operations in the additive secret-sharing scheme based on homomorphic encryption. I derive a basic relationship between a secret number and its shares, with which we develop efficient secure …

Structural Basis Of Substrate Recognition In Thimet Oligopeptidase And Development Of Nanoparticles For Therapeutic Enzyme Delivery, Jonathan Mark Wagner

Theses and Dissertations--Molecular and Cellular Biochemistry

Neuropeptidases are responsible for degradation of signaling peptides in the central nervous system and periphery. Some neuropeptidases have also been shown to play a role as part of the cell’s hydrolytic machinery responsible for breaking down proteins and peptides into amino acids, and these enzymes therefore influence small peptide availability for antigen presentation. A better understanding of how neuropeptidases recognize their substrates could lead to therapeutics that modulate the activity of these important enzymes. Alternatively, re-engineering these enzymes to selectively hydrolyze undesirable peptides could make them attractive as therapeutics themselves. A key question in understanding the activity of these enzymes …

Use Of Hybrid Diffuse Optical Spectroscopies In Continuous Monitoring Of Blood Flow, Blood Oxygenation, And Oxygen Consumption Rate In Exercising Skeletal Muscle, Katelyn Gurley

Theses and Dissertations--Biomedical Engineering

This study combines noninvasive hybrid diffuse optical spectroscopies [near-infrared spectroscopy (NIRS) and diffuse correlation spectroscopy (DCS)] with occlusive calibration for continuous measurement of absolute blood flow (BF), tissue blood oxygenation (S_tO₂), and oxygen consumption rate (VO₂) in exercising skeletal muscle. Subjects performed rhythmic dynamic handgrip exercise, while an optical probe connected to a hybrid NIRS/DCS flow-oximeter directly monitored oxy-, deoxy-, and total hemoglobin concentrations ([HbO₂], [Hb], and [tHb]), S_tO₂, relative BF (rBF), and relative VO₂ (rVO₂) in the forearm flexor muscles. Absolute baseline BF and …

Noninvasive Assessment And Modeling Of Diabetic Cardiovascular Autonomic Neuropathy, Siqi Wang

Theses and Dissertations--Biomedical Engineering

Noninvasive assessment of diabetic cardiovascular autonomic neuropathy (AN): Cardiac and vascular dysfunctions resulting from AN are complications of diabetes, often undiagnosed. Our objectives were to: 1) determine sympathetic and parasympathetic components of compromised blood pressure regulation in patients with polyneuropathy, and 2) rank noninvasive indexes for their sensitivity in diagnosing AN. Continuous 12-lead electrocardiography (ECG), blood pressure (BP), respiration, regional blood flow and bio-impedance were recorded from 12 able-bodied subjects (AB), 7 diabetics without (D0), 7 with possible (D1) and 8 with definite polyneuropathy (D2), during 10 minutes supine control, 30 minutes 70-degree head-up tilt and 5 minutes supine recovery. …

Novel Design Of Functionalized Carbon Nanotube Electrodes And Membranes For Fuel Cells And Energy Storage, Xin Su

Theses and Dissertations--Chemical and Materials Engineering

A novel electrochemical method to generate nm-scale bubbles at the tips of CNTs can temporarily block the membrane. A 92% blocking efficiency is achieved when the bubbles are stabilized in 30-60 nm diameter „wells‟ at the tips of CNTs. This well is formed by the electrochemical oxidation of the conductive CNTs partially into the polymer matrix of the membrane. Meanwhile, the nanoscale bubbles can be removed with 0.004 atm pressure to recover the transport through the CNT membrane. The CNT membrane with nanoscale bubble valve system was used to demonstrate electrochemical energy storage.

Uniform ultrathin Pt films were electrodeposited onto …

Fabrication Of An Epithelial Cell-Based Ion-Selective Electrode And Its Application For Use As Alternative Tumor Angiogenesis Assay, Christina Nicole Simmons

Theses and Dissertations--Chemical and Materials Engineering

Previous studies have provided evidence that endothelial cell-based potassium ion selective electrodes possess the ability to quantify substances that have permeability-altering effects on those endothelial cells. The capability of these so-called biosensors to detect elevated concentrations of certain chemical agents found following tumor formation make them useful in the application as an alternative tumor angiogenesis assay. In this study an epithelial cell line, human colon adenocarcinoma epithelial cells (Caco-2), was used to fabricate membranes that were used to test concentrations of these chemical agents, known as cytokines, mimicking the concentrations that have been observed in the serum of healthy individuals …

Application Of Thin Film Analysis Techniques And Controlled Reaction Environments To Model And Enhance Biomass Utilization By Cellulolytic Bacteria, Hsin-Fen Li

Theses and Dissertations--Chemical and Materials Engineering

Cellulose from energy crops or agriculture residues can be utilized as a sustainable energy resource to produce biofuels such as ethanol. The process of converting cellulose into solvents and biofuels requires the saccharification of cellulose into soluble, fermentable sugars. However, challenges to cellulosic biofuel production include increasing the activity of cellulose-degrading enzymes (cellulases) and increasing solvent (ethanol) yield while minimizing the co-production of organic acids. This work applies novel surface analysis techniques and fermentation reactor perturbations to quantify, manipulate, and model enzymatic and metabolic processes critical to the efficient production of cellulosic biofuels.

Surface analysis techniques utilizing cellulose thin film …

Finite Element Analysis Of The Contact Deformation Of Piezoelectric Materials, Ming Liu

Theses and Dissertations--Chemical and Materials Engineering

Piezoelectric materials in the forms of both bulk and thin-film have been widely used as actuators and sensors due to their electromechanical coupling. The characterization of piezoelectric materials plays an important role in determining device performance and reliability. Instrumented indentation is a promising method for probing mechanical as well as electrical properties of piezoelectric materials.

The use of instrumented indentation to characterize the properties of piezoelectric materials requires analytical relations. Finite element methods are used to analyze the indentation of piezoelectric materials under different mechanical and electrical boundary conditions.

For indentation of a piezoelectric half space, a three-dimensional finite element …

Fabrication Of Swnts For Water Desalination And Multilayer Structure For Dna Sequencing, Jingyuan Yao

Theses and Dissertations--Chemical and Materials Engineering

0.7nm single wall carbon nanotubes have been synthesized within VPI-5 zeolite channels with sucrose as carbon precursor. VPI-5 molecular sieves are synthesized hydrothermally under conventional heating. X-ray powder diffraction, micro raman, scanning electron microscope (SEM), transmission electron microscope (TEM), Thermogravimetric analysis have been used to investigate the structure of zeolite and thermal decoposition process of carbon precursors. 0.4nm single wall carbon nanotubes have also been fabricated within AlPO₄-5 nanopores. A key challenge is to produce high yield single wall carbon nanotubes with uniform diameter. In order to improve the carbon nanotube yield, different organic precursors are employed. Although …

Collectors For Enabling Flotation Of Oxidized Coal, Raghav M. Dube

Theses and Dissertations--Mining Engineering

The coalburg seam coal is an example of difficult to float bituminous coal. Laboratory tests conducted on coalburg flotation feed sample revealed recovery values around 28% with 15% product ash when using fuel oil as collector under natural pH conditions. A detailed study showed that increasing pH from natural value of 5.6 to 7.5 provided a significant improvement in recovery of approximately 32 absolute percentage points. The improvement is believed to be result of the release of humic acids from the surface and the dispersion of clay particles thereby leaving a more hydrophobic surface.

Based on the tests conducted with …

Shear Strength Of Web-Tapered I-Shaped Members, Ryan Paul Studer

Theses and Dissertations--Civil Engineering

Plate girders are fabricated in situations where standard structural shapes do not possess the required strength necessary to carry applied loads. In many instances, plate girders are tapered so that the resistance to bending is proportional to the bending moment, creating cost effective, aesthetically pleasing structures. The AISC 2010 Specifications accurately predict the flexural capacity of tapered plate girders but recent research has suggested that the required shear strength is overly conservative. The researchers postulate that the required shear strength is overly conservative due to an effect known as modified shear that has been neglected from the AISC 2010 Specifications …

A New Simulation-Based Conflict Indicator As A Surrogate Measure Of Safety, Chen Wang

Theses and Dissertations--Civil Engineering

Traffic safety is one of the most essential aspects of transportation engineering. However, most crash prediction models are statistically-based prediction methods, which require significant efforts in crash data collection and may not be applied in particular traffic environments due to the limitation of data sources. Traditional traffic conflict studies are mostly field-based studies depending on manual counting, which is also labor-intensive and oftentimes inaccurate. Nowadays, simulation tools are widely utilized in traffic conflict studies. However, there is not a surrogate indicator that is widely accepted in conflict studies.

The primary objective of this research is to develop such a reliable …

An Innovative Approach To Mechanistic Empirical Pavement Design, Ronnie Clark Graves Ii

Theses and Dissertations--Civil Engineering

The Mechanistic Empirical Pavement Design Guide (MEPDG) developed by the National Cooperative Highway Research Program (NCHRP) project 1-37A, is a very powerful tool for the design and analysis of pavements. The designer utilizes an iterative process to select design parameters and predict performance, if the performance is not acceptable they must change design parameters until an acceptable design is achieved.

The design process has more than 100 input parameters across many areas, including, climatic conditions, material properties for each layer of the pavement, and information about the truck traffic anticipated. Many of these parameters are known to have insignificant influence …

Evaluation Of Separation Method Additives For The Recovery Of Bacteria From Food Matrices, Jennifer Leanne Frederick

Theses and Dissertations--Biosystems and Agricultural Engineering

The microbiological testing of foods is a well-established science. Due to the severity of foodborne pathogen illnesses, the widespread use and implementation of rapid detection methods in food testing labs is increasingly important. The first step for successful testing is sampling. Surfactants have been highly used in food microbiology, but there is not much, if any, published research about the use of fatty alcohols and chemical dispersants as aids in microbial separation. The microbial extraction efficiency of Escherichia coli K12 and Listeria innocua from hot dogs, spinach, and milk was measured using chemical additives (surfactants, fatty alcohols, and a chemical …

Evaluating The Effectiveness Of Weep Berm Systems For Treating Runoff From A Horse Muck Composting Operation, Ross L. Guffey

Theses and Dissertations--Biosystems and Agricultural Engineering

Two contour weep berms systems were designed and implemented to evaluate their performance at mitigating water quantity problems from a horse muck composting operation. The field-scale study focused on the hydrologic response of a standard contour weep berm and a modified contour weep berm. The modified contour weep berm incorporated a woodchip trench upgradient of a typical standard contour weep design. Monitoring occurred from July 2011 through spring 2012. Eight storm events produced measureable runoff for the standard contour weep berm; however, only five storm events produced measurable runoff for the modified contour weep berm. The largest storm event occurred …

Multihierarchical Documents And Fine-Grained Access Control, Neil Moore

Theses and Dissertations--Computer Science

This work presents new models and algorithms for creating, modifying, and controlling access to complex text. The digitization of texts opens new opportunities for preservation, access, and analysis, but at the same time raises questions regarding how to represent and collaboratively edit such texts. Two issues of particular interest are modelling the relationships of markup (annotations) in complex texts, and controlling the creation and modification of those texts. This work addresses and connects these issues, with emphasis on data modelling, algorithms, and computational complexity; and contributes new results in these areas of research.

Although hierarchical models of text and markup …

Is Densified Biomass Fuel From Agro-Forestry Waste A Sustainable Energy Option?, William A. Linnig Iii

Theses and Dissertations--Mechanical Engineering

Raw biomass material is bulky, high in void fraction, and very low in transportation efficiency. Furthermore, biomass dissipates quickly in harsh environments of high heat furnaces because of its relatively low calorific value (BTU/lb) and has grinding or size degradation properties highly dissimilar from commonly-used fossil fuels like coal. Therefore, the development of transformational technologies are necessary to convert raw biomass into high-value and useful products of high hardness and calorific value without requiring excessive process energy.

This thesis investigates the sustainability of densified biomass fuels. In addition, a procedure that converts raw biomass from agro/forest industry waste into a …

Nanocrystals Of Chemotherapeutic Agents For Cancer Theranostics: Development And In Vitro And In Vivo Evaluation, Christin P. Hollis

Theses and Dissertations--Pharmacy

The majority of pharmacologically active chemotherapeutics are poorly water soluble. Solubilization enhancement by the utilization of organic solvents often leads to adverse side effects. Nanoparticle-based cancer therapy, which is passively targeted to the tumor tissue via the enhanced permeation and retention effect, has been vastly developed in recent years. Nanocrystals, which exist as crystalline and carry nearly 100% drug loading, has been explored for delivering antineoplastic agents. Additionally, the hybrid nanocrystal concept offers a novel and simple way to integrate imaging agents into the drug crystals, enabling the achievement of theranostics. The overall objective of this dissertation is to formulate …

Simulation And Experimental Validation Of Airborne And Structure-Borne Noise Transmission In Hvac Plenums, Srinivasan Ramalingam

Theses and Dissertations--Mechanical Engineering

This research demonstrates the usage of numerical acoustics to model sound and vibrational energy propagation in HVAC ducts and plenums. Noise and vibration in HVAC systems propagates along three primary paths that can be classified as airborne direct, airborne indirect and structure-borne. The airborne direct path was simulated using acoustic FEM with special boundary conditions to handle the diffuse acoustic field loading and the baffled termination. The insertion loss for a number of different plenum geometries was compared to published measurement results. Results were in good agreement both below and above the cutoff frequency. Additionally, the airborne indirect path, often …

Finite Element Analysis Of Cancellous Bone, Lucas T. Wilkerson

Theses and Dissertations--Mechanical Engineering

A variety of pathologies exist which increase the likelihood of bone fracture. Present methods for determining the fracture risk of a specific patient are based exclusively on the amount of bone present. While the quantity of bone tissue is correlated with strength, it neglects to account for bone’s intricate microarchitecture. To assess the effect of bone quality on strength, a methodology was developed for the structural analysis of cancellous bone biopsies. Thirty biopsies were selected from a pre-existing biopsy bank, and scanned using a SCANCO µCT-40 at a resolution of 30 microns. Cortical bone was removed from the resulting three-dimensional …

Design And Flight Testing Of A Warping Wing For Autonomous Flight Control, Edward Brady Doepke

Theses and Dissertations--Mechanical Engineering

Inflatable-wing Unmanned Aerial Vehicles (UAVs) have the ability to be packed in a fraction of their deployed volume. This makes them ideal for many deployable UAV designs, but inflatable wings can be flexible and don’t have conventional control surfaces. This thesis will investigate the use of wing warping as a means of autonomous control for inflatable wings. Due to complexities associated with manufacturing inflatable structures a new method of rapid prototyping deformable wings is used in place of inflatables to decrease cost and design-cycle time. A UAV testbed was developed and integrated with the warping wings and flown in a …

Low Reynolds Number Flow Field Modification Via Travelling Wave Actuation Of A Vertically Aligned Wire Array Surface, John C. Calhoun

Theses and Dissertations--Mechanical Engineering

Experiments were conducted to observe the effects of an active wire surface on low-Reynolds number Poiseuille flow. The objective was to evaluate the feasibility of actuating piezoelectric nanowires into a travelling wave motion in order to reduce wall shear stress in turbulent flows. Studies have shown that travelling wave motions introduced into the bounding wall of turbulent flow can reduce wall shear stress by disrupting the formation of drag-inducing coherent vortical structures. A Reynolds number scaled flow facility was designed to represent the near-wall region of turbulent flow. A wire surface was installed in the bounding wall and dynamically actuated …

Economic Modeling & Optimization Of A Region Specific Multi-Feedstock Biorefinery Supply Chain, William H. Faulkner

Theses and Dissertations--Manufacturing Systems Engineering

The objective of this thesis is to include strategic and tactical level decisions into the biorefinery supply chain design for a specific region while comparing multiple conversion technologies and biomass feedstocks. The allocation of biomass feedstocks, products, and the respective supply chain configuration locations are determined while ensuring the regions monthly biomass availability and product market demand constraints are met. This research considers all actions required to bring the bio-based products to market from harvesting, storing, and processing the biomass to market distribution. Two different conversion technologies are chosen for comparison: one advanced conversion technology and one conventional technology. Potential …