Digital Commons Network^™

Electrochemical Properties Of Graphene/Porous Nano-Silicon Anode, Chun-Li Li, Guang Yang, Ping Zhang, Zhi-Yu Jiang

Journal of Electrochemistry

Porous nano-silicon (Si) was prepared by acid etching Al-Si alloy powder method, and used as an active material for fabricating a grapene/porous nano-Si electrode. The results of SEM and TEM measurements indicated that porous nano-Si powder was uniformly mixed with graphene by emulsification dispersion-ultrasonication method. As an anode for lithium ion battery, the graphene/porous nano-Si electrode presented relatively high performance in 1 mol•L^-1 LiPF6/EC:DMC = 1:1(by volume) + 1.5% (by mass) VC solution. At the charge and discharge current densities of 0.5A•g^-1, the first discharge capacity was 1768.6 mAh•g^-1 with coulombic efficiency of 68.3%. The discharge …

Formation And Processability Of Liquid Crystalline Dispersion Graphene Oxide, Rouhollah Jalili, Seyed Hamed Aboutalebi, Dorna Esrafilzadeh, Konstantin Konstantinov, Joselito M. Razal, Simon E. Moulton, Gordon G. Wallace

Gordon Wallace

Rational control over the formation and processability, and consequently final properties of graphene oxide liquid crystalline dispersions has been a long-standing goal in the development of bottom-up device fabrication processes. Here we report, the principal conditions through which such levels of control can be exercised to fine-tune dispersion properties for further processing.

Ellipsometric Characterization Of Silicon And Carbon Junctions For Advanced Electronics, Alexander G. Boosalis

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Ellipsometry has long been a valuable technique for the optical characterization of layered systems and thin films. While simple systems like epitaxial silicon dioxide are easily characterized, complex systems of silicon and carbon junctions have proven difficult to analyze. Traditional model dielectric functions for layered silicon homojunctions, a system with a similar structure to modern transistors, often have correlated parameters during ellipsometric data analysis. Similarly, epitaxial graphene as grown from thermal sublimation of silicon from silicon carbide or through chemical vapor deposition, tend to have model dielectric function parameters that correlate with the optical thickness of the graphene due to …

Dgtd Analysis Of Electromagnetic Scattering From Penetrable Conductive Objects With Ibc, Ping Li, Yifei Shi, Li (Lijun) Jun Jiang, Hakan Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

To avoid straightforward volumetric discretization, a discontinuous Galerkin time-domain (DGTD) method integrated with the impedance boundary condition (IBC) is presented in this paper to analyze the scattering from objects with finite conductivity. Two situations are considered. 1) The skin depth is smaller than the thickness of the conductive volume. 2) The skin depth is larger than the thickness of a thin conductive sheet. For the first situation, a surface impedance boundary condition (SIBC) is employed, wherein the surface impedance usually exhibits a complex relation with the frequency. To incorporate the SIBC into DGTD, the surface impedance is first approximated by …

An Open-Source, Automated Chemical Vapor Deposition System For The Production Of 2d Materials, Dale Brown

Boise State University Theses and Dissertations

While interest in two-dimensional materials has exploded in recent years, the high cost of chemical vapor deposition (CVD) systems can act as a barrier to entry for some researchers interested in studying these materials. This thesis presents an open-source design for an automated CVD that can be built for a fraction of the cost of similarly capable commercial systems and that can easily be customized and expanded.With a CVD built as described,growth of high quality graphene and graphene foam is demonstrated.These results highlight the flexibility of the open-source design in producing a variety of nanomaterials, which are at the forefront …

Chemically Modified Graphene-Based Composite Paper Electrodes For Longcycle Metal-Ion Batteries, Gurpreet Singh

Composites at Lake Louise (CALL 2015)

No abstract provided.

Synthesis And Electrochemical Performance Of Mn3O4/Graphene Composites, Shan-Shan Yang, Qian Zhang, Xiong-Gui Lin, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The Mn₃O₄/Graphene composites were synthesized by hydrothermal method with the in-situ redox reaction of graphene oxide (GO) and manganese acetate (Mn(Ac)₂). The phase structures and morphologies of the materials were characterized by XRD, SEM and TEM. The XPS and IR techniques were used for studying the residual function groups of reduced graphene oxide (RGO). The electrochemical performances of the hybrids were tested in a coin cell. Results showed that the composites prepared with the addition of ammonia water (RM-A) have better performance. The graphenes in RM-A were better-reduced and the Mn3O4 particles were much …

Graphene Field Effect Transistor For Radiation Detection On A Micron To Millimeter Scale, Peter C. Lamm, Robert Speer Bean, Zachary Shollar

The Summer Undergraduate Research Fellowship (SURF) Symposium

Novel technology in radiation detection is critical to advancing radiation detectors for their many applications. Graphene has shown to be able to change its conductivity in the presence of an electric field; this makes it an excellent candidate to be used as a radiation detector for the detection of the charges generated during radiation interactions. Research has been done on making micron scale graphene field effect transistors (GFET) with graphene on a Si/SiO₂ wafer, but it is critical that we try to increase the scale. Unknowns persist in scaling graphene to millimeter sizes. This study plans to elucidate any …

Investigation Of Electrical And Magneto Transport Properties Of Reduced Graphene Oxide Thin Films, Ariful Haque

MSU Graduate Theses

Large area uniform thin films of reduced graphene oxide (RGO) was synthesized by pulsed laser deposition (PLD) technique. A number of structural properties including the defect density, average size of sp2 clusters, and degree of reduction were investigated by Raman spectroscopy and X-ray diffraction (XRD) analysis. The temperature dependent (5K - 350K) four terminal electrical transport property measurement confirms variable range hopping and thermally activated transport mechanism of the charge carriers at low (5K - 210K) and high temperature (210K - 350K) regions, respectively. The calculated localization length, density of states (DOS) near Fermi level (EF), hopping energy, and Arrhenius …

Synthesis Of Graphene Wrapped Li-Rich Layered Metal Oxide And Its Electrochemical Performance, Meng-Yan Hou, Ke Wang, Xiao-Li Dong, Yong-Yao Xia

Journal of Electrochemistry

In present work, lithium-rich layered transition metal oxide (LLO) was synthesized by a co-precipitation method in combination with a solid-state reaction. The graphene wrapped Li-rich layered oxide composite (LLO/Gra) was obtained by sintering the LLO/GO composite at 300 ^oC for 30 min in an air. The morphologies and the electrochemical performances were characterized by means of SEM, TEM, XRD, XPS, EIS and charge/discharge tests. The results indicated that the LLOe particles were uniformly wrapped with graphene. The resulting material exhibited better rate capability than that of pristine LLO since the wrapped graphene demonstrated the enhanced electronic conductivity. Accordingly, the …

C-Mems Based Micro Enzymatic Biofuel Cells, Yin Song

FIU Electronic Theses and Dissertations

Miniaturized, self-sufficient bioelectronics powered by unconventional micropower may lead to a new generation of implantable, wireless, minimally invasive medical devices, such as pacemakers, defibrillators, drug-delivering pumps, sensor transmitters, and neurostimulators. Studies have shown that micro-enzymatic biofuel cells (EBFCs) are among the most intuitive candidates for in vivo micropower.

In the fisrt part of this thesis, the prototype design of an EBFC chip, having 3D intedigitated microelectrode arrays was proposed to obtain an optimum design of 3D microelectrode arrays for carbon microelectromechanical systems (C-MEMS) based EBFCs. A detailed modeling solving partial differential equations (PDEs) by finite element techniques has been developed …

Graphene Oxide Dispersions: Tuning Rheology To Enable Fabrication, Sina Naficy, Rouhollah Jalili, Seyed Hamed Aboutalebi, Robert A. Gorkin Iii, Konstantin Konstantinov, Peter C. Innis, Geoffrey M. Spinks, Philippe Poulin, Gordon G. Wallace

Robert Gorkin III

Here, we show that graphene oxide (GO) dispersions exhibit unique viscoelastic properties, making them a new class of soft materials. The fundamental insights accrued here provide the basis for the development of fabrication protocols for these two-dimensional soft materials, in a diverse array of processing techniques.

Processing And Characterization Of Graphene And Graphene On Silicon, Cheng Peng

Theses

Graphene has become a promising material for applications in many areas including electronic devices, batteries and space crafts. Although it has a bright future, the commercial production of graphene has not yet been realized. In this thesis, an overview of the properties and applications of graphene is presented. The early research of preparing graphene and its composites is summarized, which gives the basis to synthesize graphene and improve the process. In this study, graphene oxide (GO) and graphene have been successfully made using graphite; graphene layer has been coated on the surface of a silicon wafer. The resulting specimens are …

Simulation Of Electronic And Optical Properties Of Graphene, Biao Leng

Theses

Graphene is a recently discovered two-dimensional crystal. Due to its excellent electronic properties, transport properties, optical properties, and many other features, it has tremendous potential for applications in many areas. This thesis discusses the structure and properties of graphene using several different models of graphene and carries out detailed theoretical studies and calculations of its electronic and optical properties. Using two modules of Materials Studio, CASTAP and Doml3, four graphene models have been constructed. Their electronic and optical properties have also been calculated via these two modules. By comparing the results of calculations with experimental results and the literature, the …

Thermal Properties Of Graphene, Vishal Vijay Nakhate

Theses

The two-dimensional (2D) monolayer structure of carbon atoms were initially considered as unstable. The 2D materials have recently been discovered and many researchers have started analyzing these materials. Graphene, a two-dimensional allotrope of graphite with sp2 bonded carbon atoms, is arranged in honeycomb structure. Graphene has excellent thermal conductivity and can be considered as a potential material for applications in the electronics industry where heating of materials is a serious concern.

In this study, thermal properties of p and n doped graphene nanosheets and nanoribbons are studied as function of percentage composition of the dopants and the direction of dissipation …

Large-Scale Graphene Film Deposition For Monolithic Device Fabrication, Khaled Al-Shurman

Graduate Theses and Dissertations

Since 1958, the concept of integrated circuit (IC) has achieved great technological developments and helped in shrinking electronic devices. Nowadays, an IC consists of more than a million of compacted transistors.

The majority of current ICs use silicon as a semiconductor material. According to Moore's law, the number of transistors built-in on a microchip can be double every two years. However, silicon device manufacturing reaches its physical limits. To explain, there is a new trend to shrinking circuitry to seven nanometers where a lot of unknown quantum effects such as tunneling effect can not be controlled. Hence, there is an …

Performance Dependence Of Thermosyphon On The Functionalization Approaches: An Experimental Study On Thermo-Physical Properties Of Graphene Nanoplatelet-Based Water Nanofluids

Faculty of Engineering University of Malaya

Graphene Nanoplatelets (GNP) were stably dispersed in aqueous media by covalent and non-covalent functionalization. Covalent functionalization was performed by a rapid microwave-assisted approach. Surface functionality groups and morphology of acid-treated GNP were analyzed by Fourier transform infrared spectroscopy and transmission electron microscopy. The GNP-based water nanofluids were then prepared with different concentrations of GNP to evaluate the thermo-physical and rheological properties. It was found that the rheological and thermo-physical properties of all treated samples were significantly enhanced compared to the pure water. The amount of enhancement also increased as the weight concentration increased. Thermo-physical results also confirmed that the thermal …

Structure And A Detailed Analysis Of Various Simulation Results Of Cntfet: A Review, Innovative Research Publications Irp India, Himanshu Gautam, Prateek Bindra

Innovative Research Publications IRP India

A detailed review on the Carbon Nanotube Filed Effect Transistors (CNTFETs) has been given. A little description about what are carbon nanotubes is also been covered. Various simulation results have also been included in this paper in order to provide better understanding about the carbon nanotubes field effect transistors.Characteristic Graphs of a C-CNTFET with n=10. m=11 (diameter=1.4246 nm) have been studied. Threshold voltage of CNTFETs vs n (for m=0) is also simulated. Equivalent high-frequency small-signal circuit model for a Nanotube transistor has also been analyzed. Also current voltage relationship of the CNTFET with respect to gate oxide thickness and dielectric …

Electronic, Optical, Mechanical And Thermoelectric Properties Of Graphene, Sarang Vilas Muley

Dissertations

Graphene, a two-dimensional allotrope of graphite with sp² bonded carbon atoms, is arranged in honeycomb structure. Its quasi one-dimensional form is graphene nanoribbon (GNR). Graphene related materials have been found to display excellent electronic, chemical, mechanical properties along with uniquely high thermal conductivity, electrical conductivity and high optical transparency. With excellent electrical characteristics such as high carrier transport properties, quantum Hall effect at room temperature and unusual magnetic properties, graphene has applications in optoelectronic devices.

Electronically, graphene is a zero bandgap semiconductor making it essential to tailor its structure for obtaining specific band structure. Narrow GNRs are known to …

Energy-Loss Rate Of A Fast Particle In Graphene, Yee Sin Ang, Chao Zhang, Chun Kee

Yee Sin Ang

The energy-loss rate of a fast particle in graphene is studied. The energy-loss rate always increases with increasing incident particle energy, which is quite unusual when compared to electron gas in normal metal. Graphene exhibits a “discriminating” behavior where there exists a low energy cut-off below which the scattering process is strictly forbidden, leading to lossless traverse of an external particle in graphene. This low energy cutoff is of the order of nearest neighbor hopping bandwidth. Our results suggest that backscattering is also absent in the external particle scattering of graphene.

Nonlinear Optical Response Of Graphene Superlattice In Terahertz Frequency Regime, Yee Sin Ang, Chao Zhang

Yee Sin Ang

We investigate the nonlinear optical response of a Kronig-Penney type graphene superlattice in which the Fermi velocity of the massless Dirac quasiparticle anisotropically depends on the direction of propagation. Such velocity anisotropy results in enhanced nonlinear optical response in terahertz frequency regime.

Tunable Absorption Based On Plasmonic Nanostructures Loaded With Graphene, Christos Argyropoulos

Department of Electrical and Computer Engineering: Faculty Publications

We present simulations of a hybrid graphene-plasmonic device constituted by periodic metallic nanowires placed over a dielectric spacer layer and a metallic film. The spacer layer is composed of a thin silica layer combined with an one-atom-thick graphene sheet. An electrically controlled ultra-compact absorption modulator can be realized based on the proposed theoretical device.

Molecular Modeling Of Epon 862-Detda / Carbon Composites, Cameron Hadden

Dissertations, Master's Theses and Master's Reports - Open

The thermoset epoxy resin EPON 862, coupled with the DETDA hardening agent, are utilized as the polymer matrix component in many graphite (carbon fiber) composites. Because it is difficult to experimentally characterize the interfacial region, computational molecular modeling is a necessary tool for understanding the influence of the interfacial molecular structure on bulk-level material properties. The purpose of this research is to investigate the many possible variables that may influence the interfacial structure and the effect they will have on the mechanical behavior of the bulk level composite. Molecular models are established for EPON 862-DETDA polymer in the presence of …

Flexible Free-Standing Graphene Paper With Interconnected Porous Structure For Energy Storage, Kewei Shu, Caiyun Wang, Sha Li, Chen Zhao, Yang Yang, Hua-Kun Liu, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

A novel porous graphene paper is prepared via freeze drying a wet graphene oxide gel, followed by thermal and chemical reduction. The macroscopic structure of the formed graphene paper can be tuned by the water content in the gel precursor. With 92% water content, an interconnected macroporous network can be formed. This porous graphene (PG) paper exhibits excellent electrochemical properties. It can deliver a high discharge capacity of 420 mA h g⁻¹ at a current density of 2000 mA g⁻¹ when used as binder-free lithium ion battery anode. PG paper exhibits a specific capacitance of 137 F g …

N-Doped Crumpled Graphene Derived From Vapor Phase Deposition Of Ppy On Graphene Aerogel As An Efficient Oxygen Reduction Reaction Electrocatalyst, Meng Wang, Jiazhao Wang, Yuyang Hou, Dongqi Shi, David Wexler, Simon D. Poynton, Robert C.T. Slade, Weimin Zhang, Hua-Kun Liu, Jun Chen

Australian Institute for Innovative Materials - Papers

Nitrogen-doped crumpled graphene (NCG) is successfully synthesized via vapor phase deposition of polypyrrole onto graphene aerogel followed by thermal treatment. The NCG was explored as an electrocatalyst for the oxygen reduction reaction, showing comparable electrocatalytic performance with the commercial Pt/C in alkaline membrane exchange fuel cells because of the well-regulated nitrogen doping and the robust micro-3D crumpled porous nanostructure.

Chemically Converted Graphene: Scalable Chemistries To Enable Processing And Fabrication, Sanjeev Gambhir, Rouhollah Jalili, David L. Officer, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

Graphene, a nanocarbon with exceptional physical and electronic properties, has the potential to be utilized in a myriad of applications and devices. However, this will only be achieved if scalable, processable forms of graphene are developed along with ways to fabricate these forms into material structures and devices. In this review, we provide a comprehensive overview of the chemistries suitable for the development of aqueous and organic solvent graphene dispersions and their use for the preparation of a variety of polymer composites, materials useful for the fabrication of graphene-containing structures and devices. Fabrication of the processable graphene dispersions or composites …

A Facile Approach For Fabrication Of Mechanically Strong Graphene/Polypyrrole Films With Large Areal Capacitance For Supercapacitor Applications, Yu Ge, Caiyun Wang, Kewei Shu, Chen Zhao, Xiaoteng Jia, Sanjeev Gambhir, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

Substantial progress has been made in free-standing flexible graphene-based films for flexible supercapacitors. However, there are limited reports on the areal capacitance of these electrodes, which is an important parameter for practical applications, especially in miniaturized electronic devices. Herein we report the facile fabrication of robust flexible graphene/polypyrrole nanoparticle films. PPy NPs act as the "spacer" between graphene layers creating hierarchical structures. This free-standing film shows excellent mechanical properties with a fracture strength of 16.89 MPa and Young's modulus of 11.77 MPa. The resulting film electrode delivers a large areal specific capacitance of 216 mF cm−2, which is higher or …

Synthesis Of Nitrogen-Doped Graphene Via Thermal Treatment Of Graphene Oxide Within Methylimidazole And Its Capacitance Performance As Electric Double Layer Capacitor, Md. Monirul Islam, Shaikh Nayeem Faisal, Anup Kumar Roy, Sonia Ansari, Dean Cardillo, Konstantin K. Konstantinov, Enamul Haque

Australian Institute for Innovative Materials - Papers

Nitrogen-doped graphene was successfully synthesised from graphene oxide (GO) and 2-methylimidazole composite via thermal treatment under argon flow at 700oC within 1h. This synthesised N-doped graphene exhibits homogeneous nitrogen doping with concentration of ~5% in three different nitrogen configuration namelypyridinic N, pyrrolic N and graphitic N. The electric double layer capacitor (EDLC) made up with this N-doped graphene showed excellent specific capacitance 274 F/g at current density of 1A/g, which was ~7 times higher than GO. This EDLC capacitor showed excellent cyclic stability up to 5000 cycles with capacity retention of ~91%.

Two-Dimensional Nico2o4 Nanosheet-Coated Three-Dimensional Graphene Networks For High-Rate, Long-Cycle-Life Supercapacitors, Jiang Zhou, Ying Huang, Xiehong Cao, Bo Ouyang, Wenping Sun, Chaoliang Tan, Yu Zhang, Qinglang Ma, Shuquan Liang, Qingyu Yan, Hua Zhang

Australian Institute for Innovative Materials - Papers

We report the synthesis of two-dimensional (2D) NiCo2O4 nanosheet-coated three-dimensional graphene network (3DGN), which is then used as an electrode for high-rate, long-cycle-life supercapacitors. Using the 3DGN and nanoporous nanosheets, an ultrahigh specific capacitance (2173 F g^-1 at 6 A g^-1), excellent rate capability (954 F g^-1 at 200 A g^-1) and superior long-term cycling performance (94% capacitance retention after 14000 cycles at 100 A g^-1) are achieved.

Surface Engineering And Design Strategy For Surface-Amorphized Tio 2 @Graphene Hybrids For High Power Li-Ion Battery Electrodes, Tengfei Zhou, Yang Zheng, Hong Gao, Shudi Min, Sean Li, Hua-Kun Liu, Zaiping Guo

Australian Institute for Innovative Materials - Papers

Electrode materials with battery-like high capacity and capacitorlike rate performance are highly desirable, since they would signifi cantly advance next-generation energy storage technology. [ 1 ] TiO 2 has received increasing attention as an anode material for lithium-ion batteries (LIBs) due to its good reversible capacity and low volume expansion upon lithiation, as well as its low cost and safe lithiation potential. [ 2 ] The low lithium-ion mobility within the crystalline phase TiO 2 , however, together with its poor electrical conductivity, means that only a thin surface layer of the host material is available for Li intercalation at …