Digital Commons Network^™

Daubechies And Quadratic B-Spline Wavelets For Automated Early Diagnosis Of Alzheimer's Disease, Genevieve Jacques

Theses and Dissertations

Alzheimer's disease is a neurological disorder characterized by nerve degeneration and neuronal death. The diagnosis of Alzheimer's disease at an early stage is a major concern due to the lack of a standard and effective diagnosis procedure available to community healthcare providers, as well as the increasing numbers of the elderly population affected. Clinical evaluation, the standard AD diagnostic procedure conducted at major university hospitals and research clinics, achieves, on average, a positive predictive value of 93%, with a sensitivity of 83%, specificity of 55% and an overall accuracy of 75%. An effective and objective tool for early diagnosis of …

Heterogeneous Multi-Sensor Data Fusion Using Geometric Transformations And Parzen Windows For The Nondestructive Evaluation Of Gas Transmission Pipelines, Joseph Anthony Oagaro

Theses and Dissertations

The natural gas transmission pipeline network in the United States is a key component of the nation's energy supply infrastructure and extends for over 280,000 miles and has an average age of over 60 years. The integrity of the pipeline is maintained by periodic inline inspections using magnetic or ultrasonic pigs. Defect characterization algorithms developed using current pigging data are hampered by the fact that single inspection techniques (either magnetic or ultrasonic) do not yield sufficient information for accurately and repeatably characterizing defects. This thesis demonstrates that defect characterization algorithms using multiple inspection techniques can accomplish this task. In particular, …

Three-Dimensional Shape Characterization For Particle Aggregates Using Multiple Projective Representations, Jonathan Paul Corriveau

Theses and Dissertations

Shape descriptors are used extensively in computer vision/automated recognition applications such as fingerprint matching, robotics, character recognition, etc. The conventional two-dimensional shape descriptors used in these applications do not readily lend themselves to compact representations in three dimensions. The situation is even more challenging when one attempts to numerically describe the three-dimensional shapes of a mixture of objects such as in an aggregate mix.

The goal of this study is the design, development and validation of automated image processing algorithms that can estimate three-dimensional shape-descriptors for particle aggregates. The thesis demonstrates that a single set of numbers representing a composite …

An Investigation Of Multi-Dimensional Evolutionary Algorithms For Virtual Reality Scenario Development, Scott Papson

Theses and Dissertations

Virtual reality (VR) has emerged as a powerful visualization tool for design, simulation, and analysis in modem complex industrial systems. The primary motivation for this thesis is to develop a framework for the effective use of VR in design-simulation-analysis cycles, particularly in situations involving large, complex, multi-dimensional data-sets. This thesis develops a framework that is intended to support not only the integration of such data for visual, interactive, and immersive displays, but also provides a method for performing risk analysis. Previously "static" VR environments are enhanced with time-evolutionary capabilities. Four candidate algorithms are evaluated for this purpose – deterministic modeling, …

Vlsi Implementation Of An Efficient Method For The Computation Of Line Spectral Frequencies, David L. Reynolds

Theses and Dissertations

In speech coding applications using linear predictive techniques, the computation of line spectral frequencies (LSFs) from the predictor coefficients is an extremely computationally intensive task. The unique properties of the symmetric and antisymmetric polynomial roots limit the region which must be searched, however it is still necessary to perform a root-finding algorithm on a high-order polynomial.

Certain algorithms have been developed to reduce the complexity of the root finding exercise. One such algorithm, developed by Ramachandran and Kabal, takes advantage of certain properties of the symmetric and antisymmetric polynomials to map the upper portion of the unit circle onto the …

New Product Launch Decisions Under Competition And Uncertainty: A Real Options And Game-Theoretic Approach To New Product Development, James O. Ostler

Theses and Dissertations

New product development is central to many firms' future success. Not only as a means to continue to maintain their piece of the market, but product development can also be a strategic means for a company to diversify, and/or alter focus to adapt to changing market conditions.

Most of the research in new product development has been on how to do it cheaper and faster than the next guy. However, early commercialization does not guarantee a position of strength in the market. Failures of EMI in CT scanners and Xerox in personal computers illustrate that being first to market does …

Dynamic Stability And Handling Qualities Of Small Unmanned-Aerial-Vehicles Unmanned-Aerial-Vehicles, Tyler Michael Foster

Theses and Dissertations

General aircraft dynamic stability theory was used to predict the natural frequencies, damping ratios and time constants of the dynamic modes for three specific small UAVs with wingspans on the scale from 0.6 meters to 1.2 meters. Using USAF DatCom methods, a spreadsheet program for predicting the dynamic stability and handling qualities of small UAVs was created for use in the design stage of new small UAV concept development. This program was verified by inputting data for a Cessna-182, and by then comparing the program output with that of a similar program developed by DAR Corporation. Predictions with acceptable errors …

A Finite Element Simulation Of Temperature And Material Flow In Fricton Stir Welding, Mark J. Lasley

Theses and Dissertations

The purpose of this research was to use the Transvalor S.A. product, Forge3, to develop a finite element simulation of the friction stir welding process that improves the predictability of temperature evolution and material flow within the plunge portion of the process. Previous modeling created more heating within the billet than experimental results, probably due to the simplification of the simulation with adiabatic boundary conditions. More realistic tooling temperatures were included in this model as these affect heat evolution which is a determining factor in microcrystalline growth. These results were validated by experimental efforts using a billet and tooling instrumented …

Byu Micro-Sar: A Very Small, Low-Power Lfm-Cw Synthetic Aperture Radar, Michael Israel Duersch

Theses and Dissertations

Brigham Young University has developed a low-cost, light-weight, and low power consumption SAR for flight on a small unmanned aerial vehicle (UAV) at low altitudes. This micro-SAR, or uSAR, consumes only 18 watts of power, ideal for application on a small UAV. To meet these constraints, a linear frequency modulation-continuous wave (LFM-CW) transmit signal is utilized. Use of an LFM-CW signal introduces some differences from the typical strip map SAR processing model that must be addressed in signal processing algorithms. This thesis presents a derivation of the LFM-CW signal model and the associated image processing algorithms used for the uSAR …

A Method For Winding Advanced Composites Of Unconventional Shapes Using Continuous And Aligned Fibers, Abraham K. Allen

Theses and Dissertations

Advanced composites are extremely strong, rigid, and light, even when compared with advanced metals. Advanced composites are replacing high-tech metals as the material of choice for aerospace engineering. However, the processes used to manufacture advanced composites generally lose some of the properties of the materials by their process limitations.

One process that keeps the theoretically awesome qualities of the composite materials in tact is filament winding. Filament wound parts are used as rocket shells, bicycle frame tubes, drive shafts, pressure vessels, etc. Filament winding is an automated process and makes reliable parts to close tolerances. If a straight tube were …

Characterization Of Porous Media And Refractory Materials, Xin Chen

Doctoral Dissertations

Because of its unique advantages on energy savings and casting complex shaper, Lost Foam Casting (LFC) has been widely used as a replacement to the conventional techniques (sand and investment castings). In order to continuously improve the quality of the Lost Foam Casting process for reducing scrap rate and increasing energy savings, the US Department of Energy through its National Industrial Competitiveness through Energy, Environment, and Economics (NICEEE) program sponsored the present study to develop new characterization techniques for enhancing the understanding of the fundamental properties of the refractory materials used in The Lost Foam Casting process. In this study, …

An Adaptive Tool-Based Telerobot Control System, Ge Zhang

Doctoral Dissertations

Modern telerobotics concepts seek to improve the work efficiency and quality of remote operations. The unstructured nature of typical remote operational environments makes autonomous operation of telerobotic systems difficult to achieve. Thus, human operators must always remain in the control loop for safety reasons. Remote operations involve tooling interactions with task environment. These interactions can be strong enough to promote unstable operation sometimes leading to system failures. Interestingly, manipulator/tooling dynamic interactions have not been studied in detail. This dissertation introduces a human-machine cooperative telerobotic (HMCTR) system architecture that has the ability to incorporate tooling interaction control and other computer assistance …

Convergence And Robustness Issues In Computational Fluids, Xiaoqiang Zeng

Doctoral Dissertations

The present research develops two methods to improve the convergence and robustness of CFL algorithm, the triple time method and error- limited time step ramping method.

A general formulation of the triple time scheme is developed by introducing three pseudo time-marching steps to control three preconditionings for artificial dissipation, non-linear equation iteration convergence and linear equation iteration convergence separately. It is proven that the triple time method can be degenerated to the single time method and the multiple DDLGS iteration method at special cases.

Stability analysis is used to choose the optimum combination of three preconditionings from the steady preconditioning, …

High Accuracy Distributed Target Detection And Classification In Sensor Networks Based On Mobile Agent Framework, Xiaoling Wang

Doctoral Dissertations

High-accuracy distributed information exploitation plays an important role in sensor networks. This dissertation describes a mobile-agent-based framework for target detection and classification in sensor networks. Specifically, we tackle the challenging problems of multiple- target detection, high-fidelity target classification, and unknown-target identification.

In this dissertation, we present a progressive multiple-target detection approach to estimate the number of targets sequentially and implement it using a mobile-agent framework. To further improve the performance, we present a cluster-based distributed approach where the estimated results from different clusters are fused. Experimental results show that the distributed scheme with the Bayesian fusion method have better performance …

Synthesis And Ordering Of Nanostructures Using Laser Light, Yingfeng Guan

Doctoral Dissertations

This dissertation focuses on the formation of 1-D and 2-D nanoscale structures induced by the KrF excimer UV laser irradiation of silicon (λ=248 nm). Relatively low laser energy density (E_d<=1 J/cm²) is required to produce nanostructures. Alignment of 2-D nanoripple structures and nanoprotrusions has been realized by using Lloyd’s mirror configuration.

Laser-generated silicon microcone arrays were used as templates for the growth of nanocolumns. The formation mechanism of the microstructure is reviewed, and the origin and growth of nanocolumns are discussed. The formation mechanism of nanocolumns requires highly localized melting, which explains why they fail to form on …

A Study Of The Evolution Of Laser-Induced Periodic Surface Microstructures On Silicon And Electronic Transport In Composite Carbon Nanotube Networks, Stephen Jesse

Doctoral Dissertations

This dissertation addresses two main topics, the formation of micron-scale surface structures on single crystal silicon by irradiation with a KrF (248 nm) pulsed excimer laser source, and an investigation into electronic transport through composites of polymer (PMMA) and single-walled carbon nanotubes. It is shown that the spacing between laser-generated surface structures is determined primarily by the melt time and that the crystal orientation of the substrate can determine whether surface structures will form at all and also influence the shape of individual surface structures. During the melt/solidification cycle, the shape of liquid-vapor interface in modified by surface tension, and …

Fundamental Studies Of X-Ray And Secondary Electron Spectroscopy, Staya Prasad Mulapudi

Doctoral Dissertations

Microanalysis of submicron particles in the Scanning Electron Microscope (SEM) is only possible by using low incident electron beam energies due to smaller interaction volume and suppressed beam induced charging. Such low beam energies must use L- and M- lines rather than the familiar K-lines. The information about the fundamental parameters of X-ray emission and transport at low energies is limited, so the use of L- and M- lines is problematic. The rate of generation of X-rays from an element irradiated at some energy E depends on the product of the ionization cross-section (E) and the fluorescent yield . Unfortunately …

Modeling And Source Apportionment Of Primary And Secondary Pm2.5 In The Atmosphere, Prakash Doraiswamy

Doctoral Dissertations

Source apportionment of PM_2.5 is important to identify the source categories that are responsible for the concentrations observed at a particular receptor. Although receptor models have been used to do source apportionment, they do not fully take into account the chemical reactions (including photochemical reactions) involved in the formation of secondary fine particles. Secondary fine particles are formed from photochemical and other reactions involving precursor gases such as sulfur dioxide (SO₂), oxides of nitrogen (NO_x), ammonia (NH₃) and volatile organic compounds (VOC). The purpose of this research work was to model primary and …

Automated Grid Generator For Mhd Flow Simulations Made With The Gems Code, Konstantin Kolokolnikov

Masters Theses

Numerical simulations for Hypersonic Vehicle Power System (HVEPS) Project were based on a multi-domain, general Navier-Stokes Solver Code called the GEMS® Code. The GEMS® Code was in the process of being extended to solve for plasma flows with both self-induced as well as externally-applied magnetic fields. GEMS® is also capable of simulating both laminar and turbulent flow in unbounded as well as ducted flows. For application to the ducted Plasma flows generated experimentally in the HVEPS program, GEMS® was set up to calculate turbulent flow in 1-3D (dimensional) duct geometries in general and in 2D, 3D ones for purposes of …

Microstrain Pattern Analysis Of The Canine Patellar Tendon Following A Tibial Plateau Leveling Osteotomy, Joshua Paul Stapleton

Masters Theses

This study investigates the change in strain patterns of the canine patellar tendon following a Tibial Plateau Leveling Osteotomy (TPLO). The TPLO is a procedure used to minimize anterior tibial translation in canines following a cranial cruciate rupture. A noted clinical deficiency randomly seen with the TPLO is an inflammation of the patellar tendon. In some instances, the inflammation results in material damage resulting in a calcification of the tendon and in worst cases, a fracture of the patella.

In order to investigate the strain patterns, four fresh frozen canine cadaver stifles were used. The cadavers were mounted for stabilization …

Modeling The Strategic Impact Of Management Accounting Methods On The Implementation Of Lean Manufacturing, David Joseph Meade

Dissertations

This study examines the impact from the adaptation of lean manufacturing strategies on key external financial performance measures as reported by a number of management accounting methods. The research is not concerned with creating a justification for lean manufacturing strategies but rather it evaluates the inadequacies of standard financial reporting methods to accurately reflect operational improvements possible in the key performance measures through the early stages of a lean program.

ProModel simulation software is used in conjunction with Microsoft Excel and Visual Basic to create a simulated repetitive manufacturing environment and production planning and control system. The study examines the …

A Computer Modeling Approach Using Critical Resource Diagramming Network Analysis In Project Scheduling, Vincent Gilles Delgado

Masters Theses

The problem of resource constrained project scheduling (RCPSP) continues to be an important topic in project management. Different scheduling processes have been introduced to solve cases of RCPSP. Most of the developed methods are based on a network analysis approach. The two main technique of project network analysis used for planning, scheduling, and control are PERT and CPM. These approaches assume unlimited resource availability in project network analysis. In realistic projects, both the time and resource requirements of activities should be considered in developing network schedules. Another particularity of the methods created, so far, is the focus on activities during …

The Design Of Medium Access Control (Mac) Protocols For Energy Efficient And Qos Provision In Wireless Sensor Networks, Yang Liu

Masters Theses

This thesis work focuses on innovative design of media access control (MAC) protocols in wireless sensor networks (WNSs). The characteristics of the WSN inquire that the network service design considers both energy efficiency and the associated application requirement. However, most existing protocols address only the issue of energy efficiency.

In this thesis, a MAC protocol has been proposed (referred to as Q-MAC) that not only minimized the energy consumption in multi-hop WSNs, but also provides Quality of Service (QoS) by differentiating network services based on priority levels prescribed by different applications. The priority levels reflect the state of system resources …

Thermal Modeling And Imaging Of As-Built Automotive Parts, Vijaya Priya Muthusamy Govindasamy

Masters Theses

Simulation is of significant importance in the automotive industry and can be done for various applications ranging from fluid flow analysis to complex thermal management of components. This thesis describes the method and necessary requirements for thermal modeling of automotive parts. Simulation of under hood and under vehicle automotive poses several challenges, the shape and complexity of the geometry used being the first and foremost to be considered. This thesis addresses the simulation of thermal images of as-built automotive parts using the 3D meshes generated from 3D modeling tools, CAD meshes and reverse engineered meshes.

Thermal modeling requires complete knowledge …

Evaluation Of Seal Integrity Of Flexible Food Polytrays By Destructive And Non-Destructive Techniques, William James Barlow Jr.

Masters Theses

The military has recently suffered a reduction in production capacity due to the rejection of their flexible food packaging. The rejection of these polytrays was due to sealing defects and the high standards set forth for the sealing quality. These standards set by the military were likely too conservative and until a test could be developed and optimized to quantitatively measure seal integrity, the standards will remain very high. The optimized test, whether destructive or non-destructive, must show that a particular defect, which might currently cause rejection, will not affect the quality of the items contained if passed as a …

Design And Parameter Identification Of A Discrete Variable Transmission System, Kelley Parker Brown

Masters Theses

Complex and expensive electro-hydraulic systems have shouldered the workload for remote cleanup operations in radiological and toxicological areas in the past; the payload, reach and speed requirements of most applications have demanded their use. Electromechanically actuated systems (EAS) however offer an alternative that in comparison is much more reliable and maintainable. The problems faced in implementing the EAS are in high payload operations where the hydraulic systems hold a clear power density advantage. For the EAS to compete in the area of torque, very large DC motors have been implemented which make them obsolete in restricted work space areas and …

Lean Nox Trap Catalysis For Lean Burn Natural Gas Engines, Aaron Michael Williams

Masters Theses

As the nation’s demand for energy grows along with concern for the environment, there is a pressing need for cleaner, more efficient forms of energy. The internal combustion engine is well established as one of the most reliable forms of power production. They are commercially available in power ranges from 0.5 kW to 6.5 MW, which make them suitable for a wide range of distributed power applications from small scale residential to large scale industrial. In addition, alternative fuels with domestic abundance, such as natural gas, can play a key role in weaning our nations dependence on foreign oil. Lean …

Non-Cooperative Detection Of Ultra Wideband Signals, Brett D. Gronholz

Theses and Dissertations

Techniques for the non-cooperative (non-matched filter) detection of impulse-like ultra wideband signals using channelized receiver architectures are developed and evaluated. Each technique considered is modeled and simulations conducted to characterize detection performance, the results of which are compared with the detection performance of three receivers: the matched filter receiver, which provides optimum detection performance in AWGN; the radiometer, or energy detector; and the multi-aperture cross correlation receiver. It is shown that a channelized receiver (with no downconversion) can provide approximately 2.5 dB improvement over the radiometer when performing detection using the temporal-temporal matrix (TTM). The TTM processing technique provides the …

Retrieval Of Nano-Size Particles From A Solid Substrate, Krishna Prasad Podila

Masters Theses

The retrieval of nano-size particles from suspects and crime scenes can significantly enhance surveillance and crime investigation. The Thesis deals with extensive study of free surface energy coupled with Hertzian contact energy under different conditions between a nano-sized particle and a substrate and the various methods of dislodging the particle. Using the Johnson-Kendall-Roberts (JKR) theory, a physical spring-mass-damper model is defined. Mathematical equations are formulated and solved with non-linear equations simulating the real world situation. Using Newmark’s β method, the system is solved for response of free and forced vibrations taking moisture to be responsible for damping. Key assumptions such …

Stress Corrosion Cracking And Hydrogen Embrittlement Of Martensitic Alloy Ep-823, Mohammad K. Hossain

UNLV Theses, Dissertations, Professional Papers, and Capstones

This investigation is focused on the evaluation of stress corrosion cracking (SCC), localized corrosion, and hydrogen embrittlement (HE) susceptibility of martensitic Alloy EP-823 in neutral and acidic solutions at ambient and elevated temperatures. While no failures were observed in smooth specimens in the neutral solution, failures were noticed in the 90°C acidic solution at constant-load (CL) leading to a threshold stress (O'_th) of 102 ksi. The presence of a notch reduced the O'_th value to 91 ksi in a similar environment. The ductility (%El and %RA), time-to-failure (TTF), and true failure stress (O'_r) were gradually …