Digital Commons Network^™

Comparing The Efficiency Of Heterogeneous And Homogeneous Data Center Workloads, Brandon Kimmons

Electronic Theses and Dissertations

Abstract

Information Technology, as an industry, is growing very quickly to keep pace with increased data storage and computing needs. Data growth, if not planned or managed correctly, can have larger efficiency implications on your data center as a whole. The long term reduction in efficiency will increase costs over time and increase operational overhead. Similarly, increases in processor efficiency have led to increased system density in data centers. This can increase cost and operational overhead in your data center infrastructure.

This paper proposes the idea that balanced data center workloads are more efficient in comparison to similar levels of …

Design And Implementation Of An Interactive Animatronic System For Guest Response Analysis, Brian Burns

Electronic Theses and Dissertations

In theme park based entertainment applications, there is a need for interactive, autonomous animatronic systems to create engaging and compelling experiences for the guests. The animatronic figures must identify the guests and recognize their status in dynamic interactions for enhanced acceptance and effectiveness as socially interactive agents, in the general framework of human-robot interactions. The design and implementation of an interactive, autonomous animatronic system in form of a tabletop dragon and the comparisons of guest responses in its passive and interactive modes are presented in this work. The dragon capabilities include a four degrees-of-freedom head, moving wings, tail, jaw, blinking …

Objective Predictor Metric Of Annoyance For Hydraulic Engine Mount Cavitation, John Powell

Electronic Theses and Dissertations

Vehicle acoustics has been found to have a direct impact on customer experience. Unexpected noises play a role in this experience. Hydraulic engine mount cavitation, the noise heard from the collapse of vapor bubbles in the mount, is considered one of those unexpected noises. During the design phase of a vehicle when an unexpected noise is found there is a need for a method to quantify how much of the noise is too much. Subjective evaluations alone are not enough due to variability from engineer to engineer. An objective way needed to be developed in order to evaluate the cavitation …

Smart Distributed Generation Systems Using Improved Islanding Detection And Event Classification, Bikiran Guha

Electronic Theses and Dissertations

Distributed Generation (DG) sources have become an integral part of modern decentralized power systems. However, the interconnection of DG systems to the power grid can present several operational challenges. One such major challenge is islanding detection. Islanding occurs when a DG system is disconnected from the rest of the power grid. Islanding can present serious safety hazards and therefore an accurate and fast islanding detection technique is mandated by DG interconnection standards such as IEEE 1547 and UL 1741. Conventional islanding detection techniques passively monitor the local power system parameters such as voltage and frequency to detect islanding. These techniques …

Assessment Of Electrode Configurations Of Electrical Impedance Myography For The Evaluation Of Neuromuscular Diseases, Khondokar Mohammad Fazle Rabbi

Electronic Theses and Dissertations

Electrical impedance myography (EIM) is a painless, noninvasive approach to measure the neuromuscular disease status. EIM parameters- resistance (R), reactance (X) and phase (θ) depend significantly on subcutaneous fat thickness, muscle size and inter electrode distance. The objective of this research is to find an electrode configuration which can minimize the effects on EIM parameters due to subcutaneous fat thickness variation. In this study, a model of human upper arm was developed using finite element method (FEM), which has already been established as an appropriate approach for the analysis of non-symmetrical shape for assessing alternations of muscle in disease-induced changes …

Assessment Of The Wear Effects Of Alumina-Nanofluids On Heat-Exchanger Materials, Fnu Aktaruzzaman

Electronic Theses and Dissertations

Nanofluids are nano-size-powder suspensions in liquids that are mainly studied for their abnormal thermal transport properties, and hence as enhanced alternatives to ordinary cooling fluids. The tribological effects of nanofluids are, however, largely unknown, in particular their likely wear and/or erosion effects, because of their interaction with cooling-system (heat-exchanger) materials. The thesis presents research to establish methodologies for testing and evaluating surface-change by nanofluid impact. The work is presented on development of novel test rigs and testing methodologies, and on the use of typical surface analysis tools for assessment of wear and erosion that may be produced by nanofluids; prediction …

Ultra-Fast, Autonomous, Reconfigurable Communication System, Paul Bupe Jr

Electronic Theses and Dissertations

The recent years have witnessed an increase in natural disasters in which the destruction of essential communication infrastructure has significantly affected the number of casualties. In 2005, Hurricane Katrina in the United States resulted in over 1,900 deaths, three million land-line phones disconnections, and more than 2000 cell sites going out of service. This incident highlighted an urgent need for a quick-deployment, efficient communication network for emergency relief purposes. In this research, a fully autonomous system to deploy Unmanned Aerial Vehicles (UAVs) as the first phase disaster recovery communication network for wide-area relief is presented. As part of this system, …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

Electronic Theses and Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

Performance Characteristics Of Polyethylene Terephthalate (Pet) Modified Asphalt, Matthew D. Earnest

Electronic Theses and Dissertations

Polyethylene terephthalate (PET) plastic is utilized primarily in food and beverage packaging. Although a portion of waste PET is recycled, the majority of the waste is buried in landfills. Therefore, the use of ground PET particles in asphalt may provide an environmentally friendly solution for the disposal of large quantities of PET waste. This study evaluated the performance of PET as an asphalt modifier with both asphalt binder and asphalt mixture testing. The binder testing was conducted on wet process blends produced with a high shear mixer at PET contents of 5, 10, and 15 percent by weight of the …

Computational And Experimental Study On Vertical Axis Wind Turbine In Search For An Efficient Design, Mohammad M. Bashar

Electronic Theses and Dissertations

Wind alone can fulfill most of the energy requirement of the world by its efficient conversion in to energy. Though Horizontal Axis Wind Turbine (HAWT) is more popular but needs high wind speed to generate energy. On the other hand Vertical Axis Wind Turbine (VAWT) needs low wind speed and can be installed anywhere which are some of the reasons for this research. The main objective of this research is to improve the design and performance of VAWT to make it more attractive, efficient, durable and sustainable. For a VAWT the blades perform the main role to extract energy from …

Neuromodulation Based Control Of Autonomous Robots On A Cloud Computing Platform, Cameron Muhammad

Electronic Theses and Dissertations

In recent years, the advancement of neurobiologically plausible models and computer networking has resulted in new ways of implementing control systems on robotic platforms. The work presents a control approach based on vertebrate neuromodulation and its implementation on autonomous robots in the open-source, open-access environment of robot operating system (ROS). A spiking neural network (SNN) is used to model the neuromodulatory function for generating context based behavioral responses of the robots to sensory input signals. The neural network incorporates three types of neurons- cholinergic and noradrenergic (ACh/NE) neurons for attention focusing and action selection, dopaminergic (DA) neurons for rewards- and …

A Federated Architecture For Heuristics Packet Filtering In Cloud Networks, Ibrahim M. Waziri Jr

Electronic Theses and Dissertations

The rapid expansion in networking has provided tremendous opportunities to access an unparalleled amount of information. Everyone connects to a network to gain access and to share this information. However when someone connects to a public network, his private network and information becomes vulnerable to hackers and all kinds of security threats. Today, all networks needs to be secured, and one of the best security policies is firewall implementation.

Firewalls can be hardware or cloud based. Hardware based firewalls offer the advantage of faster response time, whereas cloud based firewalls are more flexible. In reality the best form of firewall …

Numerical Analysis Of Biodiesel Combustion In A Direct Injection Compression Ignition Engine, Kyle D. Morse

Electronic Theses and Dissertations

In this work, simulations of the combustion reaction within an optical Sandia/Cummins N14 direct-injection compression ignition engine are conducted. First, validation of the spray model against liquid and vapor penetration data was conducted using a trial and error method. Secondly, the overall engine model was validated against pressure and temperature data across high and low temperature combustion regimes. The third phase of the work was focused on creating a combustion model for biodiesel. The fourth and final phase was to test the biodiesel combustion model in the pertinent combustion regimes. The agreement with common trends in emissions of biodiesel combustion …

Geotextile Tubes And Their Application To Dewatering, Kevin R. Morgan

Electronic Theses and Dissertations

Geotextile tubes are a proven cost-effective technology offering speed, efficiency, and minimal impact to the environment for dewatering of sediment or sludge from dredging operations. Common applications include: removal of solids from municipal water and waste water treatment, agricultural remediation, marine dredging operations, construction dewatering, and beach preservation and protection. Geotextile tubes are manufactured in a variety of configurations.

Geotextile tubes are used for a wide variety of environmental applications including dewatering and slurry containment. One of the most important design aspects of the tubes themselves is the ability to be flexible and expand and hold form under high pressure …

Evaluation Of Long Term Effects Of Erosion Due To Groin Placement In The Northern Yucatan Peninsula, Andrew V. Mahfood

Electronic Theses and Dissertations

This thesis documents the results of a study conducted to evaluate the long term effects of groin placement on beach re-nourishment and beach restoration in the Yucatan peninsula. The study includes the evaluation of six control points located on Chelem beach in Yucatan, Mexico, very close to the Progreso pier. The control points were set up in an active groin field to record data on the re-nourishment project covering the Chelem beach area. These erosion control groins were constructed as part of an experimental project to see how the adopted U.S. Army Corps of Engineers guidelines, for installing groins, affected …

A Technical And Economic Feasibility Study Of Implementing A Microgrid At Georgia Southern University, Matthew S. Purser

Electronic Theses and Dissertations

The performance and benefits of microgrids were considered, and the feasibility of implementing a microgrid for a portion of the Georgia Southern University campus assessed. The existing power delivery system was described and characterized to ascertain whether conversion to a microgrid would be both feasible and beneficial. Different types of distributed generation were considered for their appropriateness for use on campus. A detailed economic analysis of potential microgrid configurations was then performed using HOMER, and the results were presented in the form of recommended action and alternatives.

Water And Nutrient Reuse Within Closed Hydroponic Systems, Emerson Christie

Electronic Theses and Dissertations

Currently, little research exists on the maintenance of individual nutrient balance within the nutrient solutions of closed hydroponic systems and how this maintenance may result in reductions in water and nutrient consumption. In this study, a nutrient solution management procedure was developed to maintain outputs while minimizing inputs. Lactuca sativa (lettuce) crops were grown in six closed hydroponic systems utilizing the nutrient film technique. Electrical conductivity was used as the primary indicator of nutrient solution quality and determined if the nutrient solution was discarded and replaced (control systems) or restored (test systems). Restorations in test systems were made individually to …

Design And Analysis Of Circularly Polarized Electrically Small Antennas, Jesse R. Ludwig

Electronic Theses and Dissertations

A growing need for efficient wireless communication is prevalent in the world in which we live. From cell phones to television to GPS applications, wireless communications are vital in consumer electronics and military applications. In these applications, a miniaturized antenna is sometimes necessary for reducing overall size of the communication system. For many satellite based communication applications, circular polarization in antennas is needed for efficient communication. In this thesis, the miniaturization technique known as T-top loading is utilized on two novel antenna designs. One design is an electrically small, circularly polarized planar cross dipole and the other design is a …

Computational Analysis To Enhance Laminar Flow Convective Heat Transfer Rate In An Enclosure Using Aerosol Nanofluids, Andrew Hudson

Electronic Theses and Dissertations

The current research intends to provide a starting point to effectively model aerosol heat transfer in a narrow, enclosed body. This research can lead to future modeling of nano fluids including their heat transfer characteristics and erosion effects on the walls of an enclosure. The model was developed using ICEM CFD for the mesh and FLUENT for the fluid flow modeling. Six different aspect ratio enclosures were developed to study the effects of varying aspect ratio. The natural convection of air was developed first to establish the appropriateness of the models being used. A mesh check was performed using one …

Application Of Self-Monitoring For Situational Awareness, Christopher Trickler

Electronic Theses and Dissertations

Self-monitoring devices and services are used for physical wellness, personal tracking and self-improvement. These individual devices and services can only provide information based on what they can measure directly or historically without an intermediate system. This paper proposes a self-monitoring system to perform situational awareness which may extend into providing insight into predictable behaviors. Knowing an individual’s current state and likelihood of particular behaviors occurring is a general solution. This knowledge-based solution derived from sensory data has many applications. The proposed system could monitor current individual situational status, automatically provide personal status as it changes, aid personal improvement, contribute to …

Accelerated Data Delivery Architecture, Michael L. Grecol

Electronic Theses and Dissertations

This paper introduces the Accelerated Data Delivery Architecture (ADDA). ADDA establishes a framework to distribute transactional data and control consistency to achieve fast access to data, distributed scalability and non-blocking concurrency control by using a clean declarative interface. It is designed to be used with web-based business applications. This framework uses a combination of traditional Relational Database Management System (RDBMS) combined with a distributed Not Only SQL (NoSQL) database and a browser-based database. It uses a single physical and conceptual database schema designed for a standard RDBMS driven application. The design allows the architect to assign consistency levels to entities …

Nylon Tension Pid Control During Raw Tire Assembly, Yuan-Yu Luo

Electronic Theses and Dissertations

The purpose of this study is to evaluate several control methods to see which one has the best control of nylon tension during raw tire assembly. After nylon application step of the tire building process, the shape of the tire will undergo inflation that causes the nylon layers to expand and produces tension gradient. To overcome such a problem, the process needs to preapply a nylon trip with a gradient of tension so the tension can be balanced after the inflation step. The study evaluated several PID controllers and gathered data to see which controller results in the best nylon …

Impedance Changes In Biceps Brachii Due To Isometric Contractions And Muscle Fatigue Using Electrical Impedance Myography (Eim), Travis Orth

Electronic Theses and Dissertations

Electrical impedance myography (EIM) is a non-invasive technique used to evaluate neuromuscular conditions by using a quantitative parameter called impedance (Z). It relies upon the application and measurement of high-frequency, low-intensity electrical current imbedded over a localized muscle to determine its opposition to current flow. In brevity, impedance determines the resistance of muscle fibers due to changes in muscle composition. The objective of this thesis was to establish a relationship between muscles at rest and during isometric contractions at various force levels(25%, 50%, and 100% of maximum voluntary contraction) of the biceps brachii over a multifrequency spectrum. Impedance measurements due …

Development And Validation Of Probabilistic Fatigue Models Containing Out-Life Suspensions, Noel S. Murray

Electronic Theses and Dissertations

Author's abstract: In the area of reliability engineering it is necessary to be confident that a component or system of components will not fail under use for safety and cost reasons. One major mechanism of failure to a mechanical component is fatigue. This is the repetitious motion of loading and unloading of the material, typically below the ultimate tensile strength of the material, which ultimately leads to a catastrophic failure. To ensure this does not happen, engineers design components based on tests to determine the life of these components. These tests are typically conducted on a bench type tester in …

Numerical Simulation Of Natural Convection In Rectangular Enclosures Of Varying Aspect Ratios And Its Feasibility In Environmental Impact Management Studies, Charles R. Walker

Electronic Theses and Dissertations

Author's abstract: Numerical simulation was used to investigate natural convection in horizontal and vertical enclosures with and without an internal heat source. Natural convection in rectangular enclosures is found in many real-world applications. Included in these applications are the energy efficient design of buildings, operation and safety of nuclear reactors, solar collector design, passive energy storage, heat transfer across multi-pane windows, thermo-electric refrigeration and heating devices, and the design-for-mitigation of optical distortion in large-scale laser systems. Considering all these applications, especially controlling heat transfer in nuclear power plants, knowledge and research results of natural convection in enclosure play a vital …

Analysis Of The Performance Of Peanut Fame In A Single Cylinder Idi Engine And Investigations Of Neat Methyl Ester Influence On Fuel Quality, Jeffery Lewis

Electronic Theses and Dissertations

Author's abstract: To meet evolving standards set forth by the U.S. EPA and U.S. Energy Policy it is necessary to consider a variety of feedstock for biofuels synthesis and to understand the role individual fatty acids contribute to the overall performance. It is the belief of the authors that excess peanut production would provide an excellent source for high quality biodiesel feedstock, and the complete property and combustion analysis of the fatty acid components will provide insight for future biofuel developments. The preliminary investigations of the project focused on the combustion performance and thermal efficiency of peanut FAME and its …

Applying Transportation Forecasting To The Atlanta Area Public Transportation System, Aaron L. Taylor

Electronic Theses and Dissertations

In this thesis, we examine the implementation of volume delay functions to the Metropolitan Atlanta Rapid Transportation Authority (MARTA) system. Volume delay functions are n differentiable functions used to estimate the long-term distribution of user traffic on transportation systems. We will demonstrate the graphical behavior of these functions as well as explain the constraints for these functions. These tasks will be completed by developing a simplistic yet unrealistic model, demonstrate how the integral is used to estimate the total sum of this model, and then introduce the two functions which will be used in the analysis. The final task of …