Digital Commons Network^™

Firmware And Software For An Integrated Electrophysiology Data Acquisition And Stimulation System, Kyle D. Batzer

Masters Theses

This thesis describes the firmware and software design for a prototype electrophysiology experimentation system. The overall system, built on the work of previous students and developed with fellow graduate student Mr. Donovan Squires, provides eight channels of acquisition and four channel of arbitrary waveform generation for stimulation of biological systems. In order to show the performance of the system, a common electrophysiology experiment was performed on the giant axon of an earthworm and the results were compared to previously validated systems. The developed system is intended to support future work at the Neurobiology Engineering Laboratory at Western Michigan University.

The …

Use Of Polymer Rapid Tools As Functional Injection Mold Tooling, Sean Derrick

Masters Theses

Conventional tool making for injection molded plastics is expensive, time consuming, and generates a great deal of waste. Presently, industry is waiting for what is commonly referred to as Rapid Tooling (RT). The greatest opportunity for RT implementation would be the use of Additively Manufacturing (AM) technology. Specifically, AM techniques which use a high strength polymer resin substrate.

The following research is an initial feasibility study to determine if Polymer Rapid Tools (PRTs) could be used as functional injection mold tooling. The objective of the research was to determine if a PRT could mold a variety of features to a …

Standardized Longitudinal Connection Detail For Decked Precast Prestressed Concrete Girders, Ramzi Muftah Ali Abduallah

Masters Theses

The use of decked precast prestressed concrete girders (DPPCG) is becoming popular in accelerated bridge construction. DPPCGs are assembled and connected on site using grout or concrete longitudinal connections. The durability performance of these connections is a concern. The objective of this research is to document the longitudinal connection behavior with respect to its design parameters, and establish a process for developing a standardized connection detail considering the demands due to live load and temperature gradient (TG) load. In order to demonstrate this process, decked bulb-tee and decked box-beam girders were considered. Finite element models, under various types and levels …

Single-Depot Vehicle Routing Problem For Home Delivery Of Pharmaceutical Products, Kimberly Starr Harms

Masters Theses

Some retail pharmacies offer home delivery services to establish a competitive advantage in the growing healthcare market. The handling of orders for home delivery includes several internal and external processing and transportation activities. In this work, models were developed for use in a pharmacy delivery system to assist personnel in their daily activities. This work includes standard operating procedures for picking, packing and loading of delivery orders and the assignment and routing of vehicles to deliver customer orders. Results from simulated delivery areas identified interesting tradeoffs when comparing densely populated areas to sparsely populated areas. In addition, recommendations for order …

Analytical Solutions For A Large-Scale Long-Lived Rotating Layer Of Fluid Heated Underneath, Pouya Jalilian

Masters Theses

In this work, the system of equations for a large- scale long lived rotating layer of fluid with the deformable upper free surface and non-deformable lower free surface heated underneath has been reviewed and derived. The quasi-geostrophic approximation, the beta effect and the method of multi-scale expansions have been employed to and as a result, an equation governing the evolution of large-scale perturbations, has been derived. The effect of each term present in the upper surface deformation equation has been analyzed and the analytical solutions have been obtained by virtue of employing auxiliary Riccati equation method. The soliton solutions obtained …

Formulation And Evaluation Of Resistive Inks For Applications In Printed Electronics, Sughosh Satish Bhore

Masters Theses

In the 21^st century, it has been shown that printing methodologies can be used to print electrically functional devices on a variety of substrates. In comparison to conventional electronic manufacturing methods, printing is a more cost effective and less complex process. The requirements for manufacturing Printed Electronics (PE) components are much more demanding than graphic printing applications due to the additional requirement of easy electron flow. This additional requirement increases the need for print uniformity and layer-to-layer registration to a much higher degree. In this work, hybrid UV-curable, water-based, electrical resistive inks were formulated. Inkjet inks were prepared by …

Investigation Of Recycled Paper Deinking Mechanisms, Veronika Husovska

Dissertations

The use of water-based inks is on the rise. Sub-micron pigment particles are used for flexographic and inkjet water-based inks. Conventional deinking eliminates larger particles than those from these new ink systems. Therefore, water-based inks represent recycling difficulty.

Deinking experiments of water-based inks are carried out. The deinking strategy initially investigated elimination of pressure sensitive adhesive due to similar acrylic polymer chemistry used in water based inks. The impact of pH on stickies and ink agglomeration during deinking is studied. Experiments in acidic regions show growth of acrylic inks and stickies agglomerates, simplifying elimination.

Pre-recycling of water-based inks is explored. …

Single Case Research Designs: An Effective And Efficient Methodology For Applied Aviation Research, Geoffrey R. Whitehurst

Dissertations

The purpose of this three-paper dissertation is to examine the potential of single case research designs (SCDs) as an appropriate and efficient experimental design for use in applied aviation research. In the current environment of dwindling resources, funding for experiments requiring large sample sizes, a normal requirement for between-group designs, is becoming difficult to find. However, the need to improve safety within the aviation industry is an ongoing requirement, especially as advances in technology continue have an impact on how the industry operates. SCDs are experimental designs that require very few participants and therefore have the potential to save time …

Fuctional Properties Of Phthalocyanine Dye Based Inks, Yumeizhi Jia

Masters Theses

Currently, inkjet printing techniques are getting more attention. They have the features of non-contact and additive patterning feasibility, compatibility with different substrates (the materials on which the ink is printed), low temperature processing, and low cost (1) (2). They can be used for patterning solution processable polymers or nanoparticle inks on various substrates including conductive materials, paper and glass (3). The need for proper functional inks is increasing every year. The goal of my work was to formulate a phthalocyanine water based ink, which can work as a dielectric ink. In my research, all the materials which were used to …

Instrumentation Electronics For An Integrated Electrophysiology Data Acquisition And Stimulation System, Donovan Squires

Masters Theses

The Neurobiology Engineering Laboratory at Western Michigan University has need of an electrophysiology instrumentation system combining generation of multiple arbitrary stimulation waveforms and recording of action potentials on multiple channels. Electronics for an instrumentation system with the capability of generating four unique stimulation waveforms and recording action potentials on eight channels were developed and implemented on a printed circuit board. Collaboration with fellow graduate student, Mr. Kyle Batzer, who developed firmware and software for the instrumentation system as described in his thesis, was essential for successful realization of the instrumentation system. Knowledge gained and reported by previous students working in …

Implementation And Analysis Of A 1.4l Turbo Liquid Cooled Cac And Ac Condenser System, Mitchell Zajac

Masters Theses

This project report serves as a continuation and finalization of an overall experience with the design process including working on the development of system components, working with automotive industry leaders, suppliers and dealing with the aspects of business and production feasibility. The development of a dual level cooling concept to apply Centro Richerche Fiat established components on a Chrysler Group vehicle application was the foundation of the design project completed in December 2012 by Matt Cutler and Mitch Zajac. The development of this system aimed to decrease overall vehicle power consumption, minimize overall system packaging space, and to increase vehicle …

Improved Deinkability Of Lep (Liquid Electrophotography) Digital Prints, Zheng Wei

Masters Theses

Digital printing plays a very important role in the life of modern society. With the development of digital printing technologies, and the increasing market share of digital printing, the amount of digital prints in waste paper is rapidly increasing. Under “green” manufacturing and environmental sustainability, deinking of digital print inks is an urgent problem that needs to be solved. Indigo is a typical series of HP (Hewlett-Packard) digital presses that use a liquid ink named ElectroInk (Liquid Electrophotography or LEP). The particle size of HP ElectroInk is very small, 1-2 microns, which is smaller than dry toners. But, during flotation, …

New Approaches On Deinking Evaluations, Roland Gong

Dissertations

Paper recycling in the U.S. is the most successful program of environmental sustainability. Approximately two thirds of consumed paper products were recycled, according to the EPA and AF&PA. However, domestic mills only applied one third of recycled fibers into new products, which is much lower than reported in China (67%). The domestic recycle mills claimed that outdated facilities, poor recycled fiber quality and high manufacturing cost are the major issues. They also said that these recycle mills have been put in a “no-win” position, which threatens the whole recycling loop eventually. A case study about Chinese recycle mills has been …

Use Of A Gateway In-Street Sign Treatment To Increase Yielding To Pedestrians At Crosswalks, Miles K. Bennett

Masters Theses

An important goal to reduce the number of collisions between motorists and pedestrians is to increase motorist’s yielding right-of-way to pedestrians in crosswalks. The current study addresses this goal. A Gateway installation of instreet signs (one in-street sign installed between the two travel lanes in each direction and one on both edges of the roadway in each direction) was evaluated on multilane roads. The first experiment compared the efficacy of adding multiple in-street signs used in a gateway configuration with a single sign between the two travel lanes in each direction. The second experiment compared the in-street sign gateway treatment …

Spatial Factors Impacting Non-Motorized Exposures And Crash Risks, Farhad Abasahl

Masters Theses

This research investigates spatial factors, that impact non-motorized exposures and crashes, and examines the relationship between exposure at signalized intersections and crash frequencies involving pedestrians and bicycles at a census tract level. The four Michigan cities of Ann Arbor, East Lansing, Flint and Grand Rapids are examined. After completing an extensive literature review to provide a list of required data, 92 intersections are selected from the four cities to collect pedestrian and bicyclist counts. Five-year crash records, special attractions, non-motorized facilities and transportation infrastructure data for the four cities are gathered for the four cities. This data are later mapped …

Gis-Based Flood Analysis For Adequate Flood Mitigation In An Unplanned Urban Area; The Case Of Pikine Dagoudane In Dakar County, Senegal, Sokhna Helene Diop

Masters Theses

Since 1989, Pikine Dagoudane, in the suburbs of Dakar City has faced several flooding events, resulting in economic loss, environmental degradation and severe disturbance of the social life of the residents. The mitigation programs implemented have not appeared to provide any relief since 2000. Review of the existing literature on the crisis has revealed that the general scale of the studies, and the insufficient attention to some of the major factors could be accounted for such little efficiency. This thesis applies a different approach, based on a small area and focusing mainly on topographic characteristics, to provide a better understanding …

Organic Solar Cells Based On High Dielectric Constant Materials: An Approach To Increase Efficiency, Khalil Jumah Tawfiq Hamam

Dissertations

The efficiency of organic solar cells still lags behind inorganic solar cells due to their low dielectric constant which results in a weakly screened columbic attraction between the photogenerated electron-hole system, therefore the probability of charge separating is low. Having an organic material with a high dielectric constant could be the solution to get separated charges or at least weakly bounded electron-hole pairs. Therefore, high dielectric constant materials have been investigated and studied by measuring modified metal-phthalocyanine (MePc) and polyaniline in pellets and thin films. The dielectric constant was investigated as a function of temperature and frequency in the range …

Global Skin Friction Diagnostics: The Glof Technique And Measurements Of Complex Separated Flows, Sudesh A. Woodiga

Dissertations

This work describes the application of the global luminescent oil film skin friction meter to quantitative global skin friction diagnostics of complex separated flows. The development of this technique is based on the relationship between the oil film thickness and luminescent intensity of a luminescent oil film. The projected thin oil film equation is given to relate the normalized luminescent intensity with skin friction. The variational formulation with a smoothness constraint on skin friction is proposed to obtain a snap shot solution from two consecutive images for a relative skin friction field. A complete skin friction field is reconstructed through …

Noise And Vibration Reduction Of A Clothes Dryer, Daniel O'Hare

Honors Theses

As placement of washers and dryers becomes common in apartment buildings and high rises, noise generated by the dryer becomes a nuisance to the inhabitants. Whirlpool Corporation is experiencing this issue first hand with their Horizon model long vent dryers. A focus was placed on noise and vibrations caused by the dryer motor, because its vibrations are transferred throughout the structure of the dryer. The motor causing sound problems was a modified motor from the standard model, including a speed-increasing attachment in order to operate the fan at an increased speed. Through sound and vibration measurements, structural and airborne noise …

Industrial Wireless Communication System For Notification, Jolica Dias, Devin Semrau, Jumana Abukabbos

Honors Theses

An industrial wireless communication system for short structured messages was needed to support lean manufacturing environments. While first generation prototypes of end devices were previously constructed for the network, it lacked the range, robustness and battery operation desired. The advances made in the new system incorporate multiple small rechargeable user modules that communicate with and through one or more higher powered fixed location message router stations. This configuration ensures that wireless signal integrity is maintained throughout an industrial facility, and that the messages are successfully sent and received. XBee wireless transceivers were imbedded onto the router to enable communication between …

Plug-In Hybrid Vehicle (Phev) Component Pre-Heater, Ria Pereira

Honors Theses

In plug-in hybrid electric vehicles, the optimum temperatures of the cabin and various fluids are achieved through the dissipating heat of the internal combustion engine. In colder climates the initial warm-up of components requires the internal combustion engine to run causing unnecessary consumption of fuel. This project improved the pre-heating system formerly in place. It uses a variety of electric heaters along with the positive temperature coefficient (PTC) heater and blower motor already installed on the vehicle. A system utilizing a microcontroller turns the heaters on and off based on the inputs from the temperature sensors installed on the vehicle. …

Cyber-Adaptive Physical Systems For Automated Construction Progress Monitoring And Asset Tracking, Syed Hammad Rasheed

Masters Theses

Despite the benefits of building information models as a means of communication, collaboration and integration in construction projects, their use is often limited to the design and tendering/bidding stage. Potential of building information models lies in its implementation during construction, operations and maintenance phases of a facility’s lifecycle. Tight Integration of building information model and physical facility by means of computational resources is required to achieve this potential such that changes in one environment are automatically reflected in the other. This is termed a cyber-adaptive physical systems approach. This research investigates the applicability of a cyber-adaptive physical systems approach in …

Broncoblade: An Open Source Wind Turbine Blade Analysis Tool, Alex R. Quinlan

Masters Theses

This thesis reports the development and validation of BroncoBlade, a horizontal axis wind turbine analysis tool. BroncoBlade prepares finite element models and integrates them with an aeroelastic simulator. Analysis results for the SNL100-00 baseline blade are evaluated against reference results published by Sandia National Laboratories. Variations on the SNL100-00 blade incorporating carbon fiber are compared to the baseline blade.

Eeg Acquisition System On Mobile Platform, Veerendra Dasari

Masters Theses

The Electro-encephalogram [EEG] recording systems play a major role in the Brain Computer Interface machines where the brainwave signals are given as controls. There is a considerable development in transmission of these signals onto different platforms based on the necessity and portability of applications. With the advent of wireless signal transmission protocols for the medical devices, there is an increased research in the domain of offsite patient monitoring applications.

This document describes the evolution prototype of the portable EEG acquisition system developed to acquire the human scalp signals via electrodes and display them on the Android mobile phone after pre-conditioning …

Development Of Cfd Models For The Purposes Of Exploring Free Surface Wave Phenomena, Leonard P. Stoehr

Masters Theses

With the push for finding alternative, green energy sources, the harnessing of energy from ocean and lake waves is becoming a more researched field. To fully understand the behavior of wave interactions and optimize designs to extract this energy, it is necessary to develop computer models that can accurately replicate this behavior. A case is presented in which previous work done using the wave tank found in the Western Michigan University fluids lab is examined. The case involves harnessing the energy generated by ocean waves through the usage of plates of different shapes resting horizontally on the water’s surface. The …

Compositional And Structural Analysis Of Nitrogen Incorporated And Ion Implanted Diamond Thin Films, Elias James Garratt

Dissertations

Significant progress in area of nano-structured thin film systems has taken place in recent decades. In particular, diamond thin film systems are being widely studied for their wear resistant, optical and electronic properties. Of the various methods researchers use to modify the structure of such films, three techniques in particular are of interest due to their versatility: modification of the growth atmosphere, growth on metalized substrates, providing an interfacial layer, and modification through post-growth ion implantation. The aim of this study is to investigate the effects each has to the structure and composition of elements. Different techniques are applied in …

An Automated Approach To Dynamic Site Layout Planning, Duy Huu Nguyen

Masters Theses

Dynamic site layout planning involves determining the optimum location of resources on the construction site. Site layouts are considered dynamic because construction activities and the number and nature of associated resources change as the project progresses. Previous research has focused on the use of several algorithms to address dynamic site layout problems. These efforts do not enable automated tracking of the dynamic context of construction resources, site space and activities. This research presents an automated adaptive component level system capable of generating layouts which are optimized throughout the phases of construction projects. The system involves the integration of building information …

Extended Color Gamut For Flexographic Printing, Gaurav Dinesh Sheth

Masters Theses

The advancement in technology and the necessity to satisfy the increasing quality requirements has aroused the need for use of extended color gamut in flexographic printing. The information about extended gamut inks and ink systems is not easily available therefore, it is essential to define ink sets and color sequences that will produce optimal results in the flexographic printing process. The results were produced by evaluating color gamut volumes obtained by printing with four color process inks, and additional ink sequences, as well as by evaluating other print parameters that provide evidence in support of the research work. Special focus …