Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 30 of 67

Full-Text Articles in Entire DC Network

An Optimal Allocation And Sizing Strategy Of Distributed Energy Storage Systems To Improve Performance Of Distribution Networks, Choton K. Das, Octavian Bass, Thair S. Mahmoud, Ganesh Kothapalli, Mohammad A. S. Masoum, Navid Mousavi Dec 2019

An Optimal Allocation And Sizing Strategy Of Distributed Energy Storage Systems To Improve Performance Of Distribution Networks, Choton K. Das, Octavian Bass, Thair S. Mahmoud, Ganesh Kothapalli, Mohammad A. S. Masoum, Navid Mousavi

Research outputs 2014 to 2021

The allocation of grid-scale energy storage systems (ESSs) can play a significant role in solving distribution network issues and improving overall network performance. This paper presents a strategy for optimal allocation and sizing of distributed ESSs through P and Q injection by the ESSs to a distribution network. The investigation is carried out in a renewable-penetrated (wind and solar) medium voltage IEEE-33 bus distribution network for two different scenarios: (1) using a uniform ESS size and (2) using non-uniform ESS sizes. DIgSILENT PowerFactory is used for system modeling and testing, and simulation events are automated using Python scripting. A hybrid …


Analysis Of Individual Molecular Dynamics Snapshots Simulating Wetting Of Surfaces Using Spheroidal Geometric Constructions, Aleksandr Abramov, Stefan Iglauer Aug 2019

Analysis Of Individual Molecular Dynamics Snapshots Simulating Wetting Of Surfaces Using Spheroidal Geometric Constructions, Aleksandr Abramov, Stefan Iglauer

Research outputs 2014 to 2021

Accurate characterization of wettability of minerals is important for efficient oil recovery and carbon geosequestration. In studies where molecular dynamics simulations are used to compute the contact angle, emphasis is often placed on results or theoretical details of the simulations themselves, overlooking potentially applicable methodologies for determination of the contact angle. In this manuscript, a concept of a method utilizing spheroidal geometric constructions to estimate the contact angle of a water droplet on a silica surface in carbon dioxide atmosphere is outlined and applied to the final snapshots of two molecular dynamics simulation runs. Two carbon dioxide pressures and two …


Smart Charging Strategies For Electric Vehicle Charging Stations, Zeinab Moghaddam Jun 2019

Smart Charging Strategies For Electric Vehicle Charging Stations, Zeinab Moghaddam

Theses: Doctorates and Masters

Although the concept of transportation electrification holds enormous prospects in addressing the global environmental pollution problem, consumer concerns over the limited availability of charging stations and long charging/waiting times are major contributors to the slow uptake of plug-in electric vehicles (PEVs) in many countries. To address the consumer concerns, many countries have undertaken projects to deploy a network of both fast and slow charging stations, commonly known as electric vehicle charging networks.

While a large electric vehicle charging network will certainly be helpful in addressing PEV owners' concerns, the full potential of this network cannot be realised without the implementation …


Failure Modes And Tensile Strength Of Screw Anchors In Non-Cracked Concrete, Alireza Mohyeddin, Emad F. Gad, Jessey Lee Jun 2019

Failure Modes And Tensile Strength Of Screw Anchors In Non-Cracked Concrete, Alireza Mohyeddin, Emad F. Gad, Jessey Lee

Research outputs 2014 to 2021

Screw anchors are widely used in applications such as fastening base plates in steel and metal construction, formwork and bracing, structural steel applications, railings and handrails. At present, researchers and design engineers rely on the Concrete Capacity Design (CCD) method to predict the strength of screw anchors under the tensile loading as the only method available in literature. In CCD method, the underlying assumption is that the concrete cone and combined concrete cone and pull-out failure modes are the main failure mode for anchors, whereas, previous studies have demonstrated that pull-out is also a very common failure mode of screw …


Smart Management Strategies Of Utility-Scale Energy Storage Systems In Power Networks, Choton Kanti Das Jun 2019

Smart Management Strategies Of Utility-Scale Energy Storage Systems In Power Networks, Choton Kanti Das

Theses: Doctorates and Masters

Power systems are presently experiencing a period of rapid change driven by various interrelated issues, e.g., integration of renewables, demand management, power congestion, power quality requirements, and frequency regulation. Although the deployment of Energy Storage Systems (ESSs) has been shown to provide effective solutions to many of these issues, misplacement or non-optimal sizing of these systems can adversely affect network performance. This present research has revealed some novel working strategies for optimal allocation and sizing of utility-scale ESSs to address some important issues of power networks at both distribution and transmission levels. The optimization strategies employed for ESS placement and …


An Integrated Model To Use Drilling Modular Machine Tools, Ana Vafadar, Majid Tolouei-Rad, Kevin Hayward Jun 2019

An Integrated Model To Use Drilling Modular Machine Tools, Ana Vafadar, Majid Tolouei-Rad, Kevin Hayward

Research outputs 2014 to 2021

Modular machine tools provide a platform for drilling-related operations within automotive companies. The use of these machine tools is widespread; however, manufacturers wishing to use this technology frequently face the challenge of selecting the most appropriate manufacturing system. Accordingly, a comprehensive feasibility analysis procedure is required to assist decision-makers before any investment is made on the preparation of detailed machine design or purchase one. This paper presents a model, which collects the previous works of the authors. To do this, an integrated framework for decision-making of using machine tools is developed. The aim of this model is to enable users …


Pt Nanoparticles Decorated Heterostructured G-C3n4/Bi2moo6 Microplates With Highly Enhanced Photocatalytic Activities Under Visible Light, Z. Jia, F. Lyu, Laichang Zhang, S. Zeng, Shunxing Liang, Y. Y. Li, J. Lu May 2019

Pt Nanoparticles Decorated Heterostructured G-C3n4/Bi2moo6 Microplates With Highly Enhanced Photocatalytic Activities Under Visible Light, Z. Jia, F. Lyu, Laichang Zhang, S. Zeng, Shunxing Liang, Y. Y. Li, J. Lu

Research outputs 2014 to 2021

Exploring an efficient and photostable heterostructured photocatalyst is a pivotal scientific topic for worldwide energy and environmental concerns. Herein, we reported that Pt decorated g-C3N4/Bi2MoO6 heterostructured composites with enhanced photocatalytic performance under visible light were simply synthesized by one-step hydrothermal method for methylene blue (MB) dye degradation. Results revealed that the synthetic Pt decorated g-C3N4/Bi2MoO6 composites with Bi2MoO6 contents of 20 wt.% (Pt@CN/20%BMO) presented the highest photocatalytic activity, exhibiting 7 and 18 times higher reactivity than the pure g-C3N4 and …


Low-Cost Carbon Fibre Derived From Sustainable Coal Tar Pitch And Polyacrylonitrile: Fabrication And Characterisation, Omid Zabihi, Sajjad Shafei, Seyed Mousa Fakhrhoseini, Mojtaba Ahmadi, Hossein Ajdari Nazarloo, Rohan Stanger, Quang Anh Tran, John Lucas, Terry Wall, Minoo Naebe Apr 2019

Low-Cost Carbon Fibre Derived From Sustainable Coal Tar Pitch And Polyacrylonitrile: Fabrication And Characterisation, Omid Zabihi, Sajjad Shafei, Seyed Mousa Fakhrhoseini, Mojtaba Ahmadi, Hossein Ajdari Nazarloo, Rohan Stanger, Quang Anh Tran, John Lucas, Terry Wall, Minoo Naebe

Research outputs 2014 to 2021

Preparation of high-value pitch-based carbon fibres (CFs) from mesophase pitch precursor is of great importance towards low-cost CFs. Herein, we developed a method to reduce the cost of CFs precursor through incorporating high loading of coal tar pitch (CTP) into polyacrylonitrile (PAN) polymer solution. The CTP with a loading of 25% and 50% was blended with PAN and their spinnability was examined by electrospinning process. The effect of CTP on thermal stabilization and carbonisation of PAN fibres was investigated by thermal analyses methods. Moreover, electrospun PAN/CTP fibres were carbonised at two different temperatures i.e., 850 °C and 1200 °C and …


A Review Of The Enhancement Of Bio-Hydrogen Generation By Chemicals Addition, Yong Sun, Jun He, Gang Yang, Guangzhi Sun, Valérie Sage Apr 2019

A Review Of The Enhancement Of Bio-Hydrogen Generation By Chemicals Addition, Yong Sun, Jun He, Gang Yang, Guangzhi Sun, Valérie Sage

Research outputs 2014 to 2021

Bio-hydrogen production (BHP) produced from renewable bio-resources is an attractive route for green energy production, due to its compelling advantages of relative high efficiency, cost-effectiveness, and lower ecological impact. This study reviewed different BHP pathways, and the most important enzymes involved in these pathways, to identify technological gaps and effective approaches for process intensification in industrial applications. Among the various approaches reviewed in this study, a particular focus was set on the latest methods of chemicals/metal addition for improving hydrogen generation during dark fermentation (DF) processes; the up-to-date findings of different chemicals/metal addition methods have been quantitatively evaluated and thoroughly …


The Effect Of Fine And Coarse Recycled Aggregates On Fresh And Mechanical Properties Of Self-Compacting Concrete, Mahmoud Nili, Hossein Sasanipour, Farhad Aslani Apr 2019

The Effect Of Fine And Coarse Recycled Aggregates On Fresh And Mechanical Properties Of Self-Compacting Concrete, Mahmoud Nili, Hossein Sasanipour, Farhad Aslani

Research outputs 2014 to 2021

Today, the use of recycled aggregates as a substitute for a part of the natural aggregates in concrete production is increasing. This approach is essential because the resources for natural aggregates are decreasing in the world. In the present study, the effects of recycled concrete aggregates as a partial replacement for fine (by 50%) and coarse aggregates (by 100%) were examined in the self-compacting concrete mixtures which contain air-entraining agents and silica fumes. Two series of self-compacting concrete mixes have been prepared. In the first series, fine and coarse recycled mixtures respectively with 50% and 100% replacement with air entraining …


Application Of The Clayff And The Dreiding Force Fields For Modeling Of Alkylated Quartz Surfaces, Aleksandr Abramov, Stefan Iglauer Apr 2019

Application Of The Clayff And The Dreiding Force Fields For Modeling Of Alkylated Quartz Surfaces, Aleksandr Abramov, Stefan Iglauer

Research outputs 2014 to 2021

To extend applicability and to overcome limitations of combining rules for nonbond potential parameters, in this study, CLAYFF and DREIDING force fields are coupled at the level of atomic site charges to model quartz surfaces with chemisorpt hydrocarbons. Density functional theory and Bader charge analysis are applied to calculate charges of atoms of the OC bond connecting a quartz crystal and an alkyl group. The study demonstrates that the hydrogen atom of the quartz surface hydroxyl group can be removed and its charge can be redistributed among the oxygen and carbon atoms of the OC bond in a manner consistent …


Development Of Heavyweight Self-Compacting Concrete And Ambient-Cured Heavyweight Geopolymer Concrete Using Magnetite Aggregates, Afsaneh Valizadeh, Farhad Aslani, Zohaib Asif, Matt Roso Mar 2019

Development Of Heavyweight Self-Compacting Concrete And Ambient-Cured Heavyweight Geopolymer Concrete Using Magnetite Aggregates, Afsaneh Valizadeh, Farhad Aslani, Zohaib Asif, Matt Roso

Research outputs 2014 to 2021

Heavyweight self-compacting concrete (HWSCC) and heavyweight geopolymer concrete (HWGC) are new types of concrete that integrate the advantages of heavyweight concrete (HWC) with self-compacting concrete (SCC) and geopolymer concrete (GC), respectively. The replacement of natural coarse aggregates with magnetite aggregates in control SCC and control GC at volume ratios of 50%, 75%, and 100% was considered in this study to obtain heavyweight concrete classifications, according to British standards, which provide proper protection from sources that emit harmful radiations in medical and nuclear industries and may also be used in many offshore structures. The main aim of this study is to …


Wettability Of Fully Hydroxylated And Alkylated (001) Α-Quartz Surface In Carbon Dioxide Atmosphere, Aleksandr Abramov, Alireza Keshavarz, Stefan Iglauer Mar 2019

Wettability Of Fully Hydroxylated And Alkylated (001) Α-Quartz Surface In Carbon Dioxide Atmosphere, Aleksandr Abramov, Alireza Keshavarz, Stefan Iglauer

Research outputs 2014 to 2021

Wettability of alkylated quartz surfaces is of primary importance in several technological applications, including the development of oil and gas reservoirs and carbon geo-sequestration. It is intuitively understood and experimentally confirmed that hydroxylated quartz surfaces are hydrophilic. By gradually saturating a hydroxylated (001) α-quartz surface with pentyl groups, we show using molecular dynamics simulations that the surface can also exhibit extreme hydrophobicity. Within a range of surface pentyl group density from 0.29 to 3.18/nm2, the contact angle of a water droplet under 10 MPa pressure of carbon dioxide at 300 K changes from 10–20 to 180°. This study …


Initial Field Testing Results From Building-Integrated Solar Energy Harvesting Windows Installation In Perth, Australia, Mikhail Vasiliev, Mohammad Nur-E-Alam, Kamal Alameh Jan 2019

Initial Field Testing Results From Building-Integrated Solar Energy Harvesting Windows Installation In Perth, Australia, Mikhail Vasiliev, Mohammad Nur-E-Alam, Kamal Alameh

Research outputs 2014 to 2021

We report on the field testing datasets and performance evaluation results obtained from a commercial property-based visually-clear solar window installation site in Perth-Australia. This installation was fitted into a refurbished shopping center entrance porch and showcases the potential of glass curtain wall-based solar energy harvesting in built environments. In particular, we focus on photovoltaic (PV) performance characteristics such as the electric power output, specific yield, day-to-day consistency of peak output power, and the amounts of energy generated and stored daily. The dependencies of the generated electric power and stored energy on multiple environmental and geometric parameters are also studied. An …


Investigating The Effect Of [C8py][Cl] And [C18py][Cl] Ionic Liquids On The Water/Oil Interfacial Tension By Considering Taguchi Method, Siamak Najimi, Iman Nowrouzi, Abbas Khaksar Manshad, Mehdi Hojjat Farsangi, Ali Zeinolabedini Hezave, Jagar A. Ali, Alireza Keshavarz, Amir H. Mohammadi Jan 2019

Investigating The Effect Of [C8py][Cl] And [C18py][Cl] Ionic Liquids On The Water/Oil Interfacial Tension By Considering Taguchi Method, Siamak Najimi, Iman Nowrouzi, Abbas Khaksar Manshad, Mehdi Hojjat Farsangi, Ali Zeinolabedini Hezave, Jagar A. Ali, Alireza Keshavarz, Amir H. Mohammadi

Research outputs 2014 to 2021

Capillary and interfacial forces are of great influences of trapping hydrocarbon in porous media after primary and secondary recovery processes. The trapped crude oil in the reservoir can be mobilized and produced by reducing these forces. Thus, surfactant flooding, as a main enhanced oil recovery (EOR) method, is usually applied to reduce the interfacial tension (IFT) of crude oil–water system in porous medium and improves the oil recovery. This study focused on the effect of [C8Py][Cl] and [C18Py][Cl] ionic liquids (ILs), as a new family of surfactant, in combination with various salts including sodium chloride, potassium chloride, magnesium sulfate and …


A Numerical Study Of Axisymmetric Wave Propagation In Buried Fluid-Filled Pipes For Optimizing The Vibro-Acoustic Technique When Locating Gas Pipelines, Ying Liu, Daryoush Habibi, Douglas Chai, Xiuming Wang, Hao Chen Jan 2019

A Numerical Study Of Axisymmetric Wave Propagation In Buried Fluid-Filled Pipes For Optimizing The Vibro-Acoustic Technique When Locating Gas Pipelines, Ying Liu, Daryoush Habibi, Douglas Chai, Xiuming Wang, Hao Chen

Research outputs 2014 to 2021

Buried pipeline systems play a vital role in energy storage and transportation, especially for fluid energies like water and gas. The ability to locate buried pipes is of great importance since it is fundamental for leakage detection, pipeline maintenance, and pipeline repair. The vibro-acoustic locating method, as one of the most effective detection technologies, has been studied by many researchers. However, previous studies have mainly focused on vibro-acoustic propagation in buried water pipes. Limited research has been conducted on buried gas pipes. In this paper, the behavior of gas-dominated wave motion will be investigated and compared against water-dominated wave motion …


Phase Interaction Induced Texture In A Plasma Sprayed-Remelted Nicrbsi Coating During Solidification: An Electron Backscatter Diffraction Study, Liang-Yu Chen, Tianxiang Xu, Haiyang Wang, Peng Sang, Sheng Lu, Ze-Xin Wang, Shujin Chen, Lai-Chang Zhang Jan 2019

Phase Interaction Induced Texture In A Plasma Sprayed-Remelted Nicrbsi Coating During Solidification: An Electron Backscatter Diffraction Study, Liang-Yu Chen, Tianxiang Xu, Haiyang Wang, Peng Sang, Sheng Lu, Ze-Xin Wang, Shujin Chen, Lai-Chang Zhang

Research outputs 2014 to 2021

Although considerable endeavors have been dedicated to investigate the microstructures of the remelting-enhanced NiCrBSi coatings, the textures in the remelted coatings, which may result in property anisotropy, are rarely studied. In this work, the recrystallized fractions, grain orientations and interphase boundaries for Ni, Ni3B and CrB in a plasma sprayed-remelted NiCrBSi coating were investigated by electron backscatter diffraction. The results demonstrate that the texture is induced by phase interaction during solidification. Cooling from the liquid, the firstly formed Ni grains possess a cube fiber texture of {001}〈001〉. The successively formed Ni3B colonies are randomly oriented and …


Degradation And Hydrate Phase Equilibria Measurement Methods Of Monoethylene Glycol, Khalid Alef, Stefan Iglauer, Ahmed Barifcani Jan 2019

Degradation And Hydrate Phase Equilibria Measurement Methods Of Monoethylene Glycol, Khalid Alef, Stefan Iglauer, Ahmed Barifcani

Research outputs 2014 to 2021

Monoethylene glycol (MEG), a common chemical used for the inhibition of gas hydrate formation may undergo degradation in the regeneration/reclamation process. Limited research exists on the effect of degradation of MEG on hydrate formation, production facilities and equipment especially in the presence of other chemical additives. The proposed method allows for streamlining the process of preparing, degrading and analysis of MEG solutions for hydrate testing and degradation products.

Procedure to prepare accurate MEG solutions avoiding oxidative degradation of MEG (i.e., controlling oxygen ingress).

Two methods are suggested to mimic field-like degradation of MEG solutions (i.e., degradation by reclamation …


Deformation And Strength Characteristics Of Laves Phases In Titanium Alloys, Chirag D. Rabadia, Y. J. Liu, Liang-Yu Chen, Syed F. Jawed, L. Q. Wang, Hongqi Sun, Laichang Zhang Jan 2019

Deformation And Strength Characteristics Of Laves Phases In Titanium Alloys, Chirag D. Rabadia, Y. J. Liu, Liang-Yu Chen, Syed F. Jawed, L. Q. Wang, Hongqi Sun, Laichang Zhang

Research outputs 2014 to 2021

The superior reinforcement nature of Laves phases make them suitable for high-strength applications. Therefore, investigations on the deformation and strength characteristics of Laves phases are useful in development of an improved Laves phase-reinforced alloy. In this work, the Vickers micro-indentation method is used to evaluate and compare the deformation and strength characteristics of a hexagonal close-packed Laves phase (C14-type) in Ti-35Zr-5Fe-6Mn (wt%) and a face-centered cubic Laves phase (C15-type) in Ti-33Zr-7Fe-4Cr (wt%), considering the same volume fraction of Laves phase (~7.0%) in these alloys. Moreover, the effects of higher volume fraction of Laves phase (19.4%) on indentation-based deformation features are …


Noninvasive Diagnosis Of Irritable Bowel Syndrome Via Bowel Sound Features: Proof Of Concept, Xuhao Du, Gary Allwood, K. Mary Webberley, Andrisha-Jade Inderjeeth, Adam Osseiran, Barry James Marshall Jan 2019

Noninvasive Diagnosis Of Irritable Bowel Syndrome Via Bowel Sound Features: Proof Of Concept, Xuhao Du, Gary Allwood, K. Mary Webberley, Andrisha-Jade Inderjeeth, Adam Osseiran, Barry James Marshall

Research outputs 2014 to 2021

INTRODUCTION: Irritable bowel syndrome (IBS) is a common and debilitating disorder estimated to affect approximately 11% of the world's population. Typically, IBS is a diagnosis of exclusion after patients undergo a costly and invasive colonoscopy to exclude organic disease. Clinician's and researchers have identified a need for a new cost-effective, accurate, and noninvasive diagnostic test for IBS.

METHODS: Using a diagnostic case-control study, we explored the use of bowel sounds to characterize IBS with a view to diagnostic use. We recruited participants with an existing clinical diagnosis of IBS or healthy (asymptomatic) digestive systems. We recorded bowel sounds for 2 …


Recent Developments In Solar Energy-Harvesting Technologies For Building Integration And Distributed Energy Generation, Mikhail Vasiliev, Mohammad Nur-E-Alam, Kamal Alameh Jan 2019

Recent Developments In Solar Energy-Harvesting Technologies For Building Integration And Distributed Energy Generation, Mikhail Vasiliev, Mohammad Nur-E-Alam, Kamal Alameh

Research outputs 2014 to 2021

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on recent cutting-edge results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview …


Phase Separation And Enhanced Wear Resistance Of Cu88fe12 Immiscible Coating Prepared By Laser Cladding, Shuzhen Zhao, Shengfeng Zhou, Min Xie, Xiaoqin Dai, Dongchu Chen, Laichang Zhang Jan 2019

Phase Separation And Enhanced Wear Resistance Of Cu88fe12 Immiscible Coating Prepared By Laser Cladding, Shuzhen Zhao, Shengfeng Zhou, Min Xie, Xiaoqin Dai, Dongchu Chen, Laichang Zhang

Research outputs 2014 to 2021

In order to eliminate the microstructure segregation of Cu–Fe immiscible alloys which characterized with a liquid miscible gap, the Cu88Fe12 (wt.%) immiscible coating was prepared by laser cladding. The phase separation characteristic and wear resistance of the Cu88Fe12 (wt.%) immiscible coating were also investigated. The results show that the size of the milled Cu88Fe12 composite powder is reduced comparing to that of the un-milled powder due to fracturing during mechanical milling. Moreover, the demixing or delamination disappears in the Cu88Fe12 immiscible coating and a large amount of face-centered-cubic (fcc) γ-Fe and body-centered-cubic (bcc) α-Fe particles are dispersed in the face-centered-cubic …


Nanoindentation Characterization On Local Plastic Response Of Ti-6al-4v Under High-Load Spherical Indentation, Yan Wen, Lechun Xie, Zhou Wang, Liqiang Wang, Weijie Lu, Laichang Zhang Jan 2019

Nanoindentation Characterization On Local Plastic Response Of Ti-6al-4v Under High-Load Spherical Indentation, Yan Wen, Lechun Xie, Zhou Wang, Liqiang Wang, Weijie Lu, Laichang Zhang

Research outputs 2014 to 2021

After high-load spherical indentation treatment, the variations of hardness on the plastic zone of Ti-6Al-4V were investigated via nanoindentation method. The hardness within the center of plastic zone was measured by nanoindenter, and the magnitude decreased gradually along the depth, which were caused by the different extent of plastic deformation under the residual imprint. The microstructure of indentation were observed using scanning electron microscope (SEM) before and after surface etching, and the results showed that the microhardness revealed the average hardness of α and β phases of Ti-6Al-4V. The maximum hardness reached 6.438 GPa in the depth of 132 μm. …


Editorial: Environmental Catalysis And The Corresponding Catalytic Mechanism, Zhimin Ao, Hongqi Sun, Andres Fullana Jan 2019

Editorial: Environmental Catalysis And The Corresponding Catalytic Mechanism, Zhimin Ao, Hongqi Sun, Andres Fullana

Research outputs 2014 to 2021

The ever growing environmental pollution has stimulated the rapid development of environmental catalysis in recent years. Environmental catalysis is a multidisciplinary research field for which more and more chemists, materials scientists, as well as environmentalists have devoted their efforts working in this field because of the bright potentials in improving human health and life quality...


Effect Of Al Alloying On Cavitation Erosion Behavior Of Tasi2 Nanocrystalline Coatings, Jiang Xu, Shuai Kang Zhang, Xiao Lin Lu, Shuyun Jiang, Paul Munroe, Zong-Han Xie Jan 2019

Effect Of Al Alloying On Cavitation Erosion Behavior Of Tasi2 Nanocrystalline Coatings, Jiang Xu, Shuai Kang Zhang, Xiao Lin Lu, Shuyun Jiang, Paul Munroe, Zong-Han Xie

Research outputs 2014 to 2021

To broaden the scope of non-aerospace applications for titanium-based alloys, both hexagonal C40 binary TaSi2 and ternary Al alloyed TaSi2 nanocrystalline coatings were exploited to enhance the cavitation erosion resistance of Ti-6Al-4V alloy in acidic environments. To begin with, the roles of Al addition in influencing the structural stability and mechanical properties of hexagonal C40 Ta(Si1-xAlx)2 compounds were modelled using first-principles calculations. The calculated key parameters, such as Pugh's index (B/G ratio), Poisson's ratio, and Cauchy pressures, indicated that there was a threshold value for Al addition, below which the increase of Al …


Properties Of Ambient-Cured Normal And Heavyweight Geopolymer Concrete Exposed To High Temperatures, Farhad Aslani, Zohaib Asif Jan 2019

Properties Of Ambient-Cured Normal And Heavyweight Geopolymer Concrete Exposed To High Temperatures, Farhad Aslani, Zohaib Asif

Research outputs 2014 to 2021

Ambient-cured heavyweight geopolymer concrete (HWGC) is a new type of concrete that combines the benefits of both heavyweight concrete (HWC) and geopolymer concrete (GC). HWGC provides proper protection from the sources that emit harmful radiations in medical and nuclear industries. Furthermore, HWGC may also be used in offshore structures for pipeline ballasting and similar underwater structures. In this study, heavyweight aggregates (magnetite) have been used and replaced by normal-weight coarse aggregates in GC at volume ratios of 50, 75, and 100% to attain heavyweight classification according to British standards. This study investigates the impacts of high temperatures on standard ambient-cured …


Local Instabilities During Capillary-Dominated Immiscible Displacement In Porous Media, Yang Liu, Stefan Iglauer, Jianchao Cai, Mohammad A. Amooie, Chaozhong Qin Jan 2019

Local Instabilities During Capillary-Dominated Immiscible Displacement In Porous Media, Yang Liu, Stefan Iglauer, Jianchao Cai, Mohammad A. Amooie, Chaozhong Qin

Research outputs 2014 to 2021

Fully understanding the mechanism of pore-scale immiscible displacement dominated by capillary forces, especially local instabilities and their influence on flow patterns, is essential for various industrial and environmental applications such as enhanced oil recovery, CO2 geo-sequestration and remediation of contaminated aquifers. It is well known that such immiscible displacement is extremely sensitive to the fluid properties and pore structure, especially the wetting properties of the porous medium which affect not only local interfacial instabilities at the micro-scale, but also displacement patterns at the macro-scale. In this review, local interfacial instabilities under three typical wetting conditions, namely Haines jump events …


Economic And Productivity Evaluation Of Different Horizontal Drilling Scenarios: Middle East Oil Fields As Case Study, Abbas Khaksar Manshad, Milad Ebrahimi Dastgerdi, Jagar A. Ali, Nazir Mafakheri, Alireza Keshavarz, Stefan Iglauer, Amir H. Mohammadi Jan 2019

Economic And Productivity Evaluation Of Different Horizontal Drilling Scenarios: Middle East Oil Fields As Case Study, Abbas Khaksar Manshad, Milad Ebrahimi Dastgerdi, Jagar A. Ali, Nazir Mafakheri, Alireza Keshavarz, Stefan Iglauer, Amir H. Mohammadi

Research outputs 2014 to 2021

Development of high-density oil and gas fields presents a great challenge to the energy industry due to the low productivity of individual wells and their high drilling cost. We thus compared the productivity, associated costs and economical revenues gained from two field development scenarios, with multilateral and horizontal drilling, to evaluate the optimal drilling and completion conditions in a giant heavy oil reservoir in the Middle East. Well path design was identified as one of the most complex parameters depending on the well-testing results, field production and reservoir simulation data. The fishbone well of four branches with a length of …


A Hardware-Deployable Neuromorphic Solution For Encoding And Classification Of Electronic Nose Data, Anup Vanarse, Alexander Rassau, Peter Van Der Made Jan 2019

A Hardware-Deployable Neuromorphic Solution For Encoding And Classification Of Electronic Nose Data, Anup Vanarse, Alexander Rassau, Peter Van Der Made

Research outputs 2014 to 2021

In several application domains, electronic nose systems employing conventional data processing approaches incur substantial power and computational costs and limitations, such as significant latency and poor accuracy for classification. Recent developments in spike-based bio-inspired approaches have delivered solutions for the highly accurate classification of multivariate sensor data with minimized computational and power requirements. Although these methods have addressed issues related to efficient data processing and classification accuracy, other areas, such as reducing the processing latency to support real-time application and deploying spike-based solutions on supported hardware, have yet to be studied in detail. Through this investigation, we proposed a spiking …


Calculation Of Oxygen Diffusion Coefficients In Oxide Films Formed On Low-Temperature Annealed Zr Alloys And Their Related Corrosion Behavior, Lina Zhang, Liang-Yu Chen, Cuihua Zhao, Yujing Liu, Lai-Chang Zhang Jan 2019

Calculation Of Oxygen Diffusion Coefficients In Oxide Films Formed On Low-Temperature Annealed Zr Alloys And Their Related Corrosion Behavior, Lina Zhang, Liang-Yu Chen, Cuihua Zhao, Yujing Liu, Lai-Chang Zhang

Research outputs 2014 to 2021

The growth of oxide film, which results from the inward oxygen diffusion from a corrosive environment, is a critical consideration for the corrosion resistance of zirconium alloys. This work calculates the oxygen diffusion coefficients in the oxide films formed on zirconium alloys annealed at 400~500 °C and investigates the related corrosion behavior. The annealed samples have a close size for the second-phase particles but a distinctive hardness, indicating the difference in substrate conditions. The weight gain of all samples highly follows parabolic laws. The weight gain of the sample annealed at 400 °C has the fastest increase rate at the …