Digital Commons Network^™

Future Needs Of The Cybersecurity Workforce, Connie Justice, Char Sample, Sin Ming Loo, Alex Ball, Clay Hampton

Electrical and Computer Engineering Faculty Publications and Presentations

Expected growth of the job market for cyber security professionals in both the US and the UK remains strong for the foreseeable future. While there are many roles to be found in cyber security, that vary from penetration tester to chief information security officer (CISO). One job of particular interest is security architect. The rise in Zero Trust Architecture (ZTA) implementations, especially in the cloud environment, promises an increase in the demand for these security professionals. A security architect requires a set of knowledge, skills, and abilities covering the responsibility for integrating the various security components to successfully support an …

Anglo-American Nursing: A Historical Timeline Of The Field From The Renaissance To World War Ii, Carlyn Homann

Honors Projects

This timeline stands as an extensive- although not comprehensive- review of the evolution of Anglo-American nursing as a profession, but it will also explore the contributions of other nations where it is appropriate. It seeks to summarize the field and its limitations from the early 15th century to World War II, as well as the capability for upward movement within an existing hierarchy while also considering the education required of a nurse during the selected time period in order to provide context for current nursing students.

Another Brick In The Wall: An Exploratory Analysis Of Digital Forensics Programs In The United States, Syria Mccullough, Stella Abudu, Ebere Onwubuariri, Ibrahim Baggili

Electrical & Computer Engineering and Computer Science Faculty Publications

We present a comprehensive review of digital forensics programs offered by universities across the United States (U.S.). While numerous studies on digital forensics standards and curriculum exist, few, if any, have examined digital forensics courses offered across the nation. Since digital forensics courses vary from university to university, online course catalogs for academic institutions were evaluated to curate a dataset. Universities were selected based on online searches, similar to those that would be made by prospective students. Ninety-seven (n = 97) degree programs in the U.S. were evaluated. Overall, results showed that advanced technical courses are missing from curricula. We …

Exploring The Learning Efficacy Of Digital Forensics Concepts And Bagging & Tagging Of Digital Devices In Immersive Virtual Reality, Courtney Hassenfeldt, Jillian Jacques, Ibrahim Baggili

Electrical & Computer Engineering and Computer Science Faculty Publications

This work presents the first account of evaluating learning inside a VR experience created to teach Digital Forensics (DF) concepts, and a hands-on laboratory exercise in Bagging & Tagging a crime scene with digital devices. First, we designed and developed an immersive VR experience which included a lecture and a lab. Next, we tested it with (n = 57) participants in a controlled experiment where they were randomly assigned to a VR group or a physical group. Both groups were subjected to the same lecture and lab, but one was in VR and the other was in the real world. …

From Open Access To Open Science: The Path From Scientific Reality To Open Scientific Communication, Christian Heise, Joshua M. Pearce

Michigan Tech Publications

Although opening up of research is considered an appropriate and trend-setting model for future scientific communication, it can still be difficult to put open science into practice. How open and transparent can a scientific work be? This article investigates the potential to make all information and the whole work process of a qualification project such as a doctoral thesis comprehensively and freely accessible on the internet with an open free license both in the final form and completely traceable in development. The answer to the initial question, the self-experiment and the associated demand for openness, posed several challenges for a …

Experience Constructing The Artifact Genome Project (Agp): Managing The Domain's Knowledge One Artifact At A Time, Cinthya Grajeda, Laura Sanchez, Ibrahim Baggili, Devon R. Clark, Frank Breitinger

Electrical & Computer Engineering and Computer Science Faculty Publications

While various tools have been created to assist the digital forensics community with acquiring, processing, and organizing evidence and indicating the existence of artifacts, very few attempts have been made to establish a centralized system for archiving artifacts. The Artifact Genome Project (AGP) has aimed to create the largest vetted and freely available digital forensics repository for Curated Forensic Artifacts (CuFAs). This paper details the experience of building, implementing, and maintaining such a system by sharing design decisions, lessons learned, and future work. We also discuss the impact of AGP in both the professional and academic realms of digital forensics. …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Slides: Impacts Of Energy Deficits In Cooking, Illumination, Water, Sanitation, And Motive Power, Paul S. Chinowsky

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Dr. Paul Chinowsky, Director, Mortenson Center in Engineering for Developing Communities; Professor, University of Colorado

25 slides

Modernizing The Microcontroller Laboratory With Low-Cost And Open-Source Tools, Kenneth J. Hass, Juliana Su

Faculty Conference Papers and Presentations

No abstract provided.

Optical Fibre Communications And Sensing System Experiments For Undergraduate Photonics Laboratories, Graham Wild, Geoffrey Swan

Research outputs 2011

Experiments in photonics tend to be reserved for postgraduate laboratories, where suitable equipment and resources are available. Simple optical fibre experiments may be included in some undergraduate programs, possibly utilising polymer optical fibres with LEDs and phototransistors, or with the use of bulk optical components and glass optical fibre elements. However, real optical fibre communication systems and optical fibre sensing systems utilise more complex devices, such as optical fibre Bragg gratings. With the availability of optical components in the 850nm wavelength range, a variety of practical systems can be realised using industry standard components. We show how to mitigate a …

Software Defined Radio: Inexpensive Hardware And Software Tools, Thad B. Welch, Cameron H. G Wright, Michael G. Morrow

Electrical and Computer Engineering Faculty Publications and Presentations

DSP topics such as software defined radio are more easily taught if appropriate demonstrations and laboratory experiences are provided. This paper describes a new, inexpensive software defined radio educational platform based upon MATLAB and the Texas Instruments C6713 digital signal processing starter kit. We describe the hardware and software issues and briefly describe recommended classroom use.

Plug-In Electric Drive Vehicles: Experiences In Research And Education, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

This paper briefly describes the research and educational activities related to a current NSF CAREER grant titled "Vehicle Fleet as a Distributed Energy Storage System for the Power Grid". The PI, Dr. Ferdowsi, is an assistant professor at the Electrical and Computer Engineering Department of the Missouri University of Science and Technology (MST).

An Approach To Teaching Pid Controller Tuning, Aidan O'Dwyer

Conference papers

This paper discusses an approach to the teaching of PID controller tuning methods to students in control engineering at Dublin Institute of Technology. The method involves analytically calculating the gain margin, phase margin and maximum sensitivity for PI and PID controlled systems whose process is modelled in first order lag plus time delay (FOLPD) form. Students can examine the performance of many tuning rules from graphical results, allowing insight to be developed as to the most rational choice of the tuning rule for the application. Some preliminary work done to develop an expert system to allow a greater automation of …

Blue-Box Approach To Power Electronics And Machines Educational Laboratories, Robert S. Balog, Zakdy Sorchini, Jonathan W. Kimball, Patrick L. Chapman, Philip T. Krein, Peter W. Sauer

Electrical and Computer Engineering Faculty Research & Creative Works

Our approach to laboratory education in power electronics and electric machines is presented. The approach centers upon "blue-box" laboratory components, that aid the student in rapid experiment assembly without disguising important aspects of the hardware. Several example experiments are presented. Schematics and construction techniques for the hardware are publicly available.

Teaching Nanotechnology By Introducing Crossbar-Based Architecture And Quantum-Dot Cellular Automata, Minsu Choi, Nohpill Park

Electrical and Computer Engineering Faculty Research & Creative Works

The end of photolithography as the driver for Moore's law is predicted within seven to twelve years and six different emerging technologies (mostly nanoscale) are expected to replace the current CMOS-based system integration paradigm. As nanotechnology is emerging, (1) there is a strong need for well-educated nanoscale systems engineers by industry, and (2) research and education efforts are also called to overcome numerous nanoscale systems issues. This paper is to propose a way to teach nanotechnology by introducing two emerging technologies: crossbar-based nanoarchitecture and quantum-dot cellular automata.

Modern Laboratory-Based Education For Power Electronics And Electric Machines, Robert S. Balog, Zakdy Sorchini, Jonathan W. Kimball, Patrick L. Chapman, Philip T. Krein

Electrical and Computer Engineering Faculty Research & Creative Works

The study of modern energy conversion draws upon a broad range of knowledge and often requires a fair amount of experience. This suggests that laboratory instruction should be an integral component of a power electronics and electric machines curriculum. However, before a single watt can be processed in a realistic way, the student must understand not only the operation of conversion systems but also more advanced concepts such as control theory, speed and position sensing, switching signal generation, gate drive isolation, circuit layout, and other critical issues. Our approach is to use a blue-box module where these details are pre-built …

Maintaining A Balance At Undergraduate Degree Level In The Teaching Of Automation And Classical Control Systems, Eugene Coyle, Aidan O'Dwyer

Conference papers

Advances in the past decade in the development and application of Programmable Logic Controllers (PLCs) and Automation Systems in both high technology industrial plants and in the more mainstream manufacturing sectors, has heightened the importance of ensuring that undergraduate degree programme syllabi are designed to adequately cater for the teaching and training of students in automation. Prior to this growth in automation, delivered syllabi in Control Systems on most Electrical Engineering programmes had a theoretical rigour, reflecting the mathematical nature of the topic. A major challenge currently facing departmental lecturing staff and programme coordinators is that of the design of …

Learning Games Programming With Dalek World., Bryan Duggan, Hugh Mcatamney, Fredrick Mtenzi

Conference papers

From September 2005 the School of Computing in the DIT will offer an elective in computer games programming to final year computer science students. This paper demonstrates how students will learn games programming by developing a 3D FPS (First Person Shooter) called Dalek World. Dalek World is developed using Microsoft Visual Studio in C++ and was originally developed by the authors to learn games programming techniques themselves. In developing Dalek World, students will learn Euclidian geometry, 3D graphics programming, object orientated game design, level loading, physics, collision detection, the A* algorithm, perception and enemy AI using finite state machines.

Digital Scr Control Box For Educational Laboratory, Zakdy Sorchini, Jonathan W. Kimball, Philip T. Krein

Electrical and Computer Engineering Faculty Research & Creative Works

A "blue box" has been designed to introduce the silicone controlled rectifier (SCR) to power electronics students. SCRs are useful in many real-world applications, and are conceptually important in a student's understanding of power converters. The box is highly flexible in application, and its internal design is simple enough to explain to students. Experiments are shown, both of the type commonly used in the laboratory and of the type used for demonstrations. The box has also been designed to be suitable for research purposes and line voltage applications.

Using Information Technology To Enhance Control Engineering Education: Some Experiences, Aidan O'Dwyer

Conference papers

In the past decade, the use of computer based design and analysis tools, such as MATLAB/SIMULINK, has revolutionised practice in Control Engineering. Concepts that were previously only understandable after sustained mathematical analysis or experimental work may now be readily simulated on the computer. Over the past four years, the author has experimented with the use of MATLAB/SIMULINK, in the lecture and laboratory environment, with degree and taught masters students in control engineering at Dublin Institute of Technology (DIT). It has been found that the tool helps to increase student understanding of challenging topics, to act as motivation to further exploration …

Emc Applications Of Emap-2: A 3d Finite Element Modeling Code, Todd H. Hubing, M. Ali

Electrical and Computer Engineering Faculty Research & Creative Works

EMAP-2, a 3-D finite element modeling code that can be used to model simple printed circuit board configurations, is discussed. It is a true full-wave field solver designed to be used for education or research. EMAP-2 is written in the C programming language. The code, its capabilities, and its limitations are described. Two examples illustrate how the code can be applied to problems of particular interest to EMC (electromagnetic compatibility) engineers.

Coperite-Computer-Aided Tool For Power Engineering Research, Instruction, Training And Education, Badrul H. Chowdhury, D. E. Clark

Electrical and Computer Engineering Faculty Research & Creative Works

A graphics-oriented, primarily PC-based tool for education, research, and training in power engineering is introduced. The tool, called COPERITE, has all user interfaces resident on an IBM-386 microcomputer. Menus and windows are used for the interface, and attractive graphical representations and displays are included. Application programs that are interfaced are power flow, contingency analysis, economic dispatch, security-constrained dispatch, system stability, and fault analysis. These programs are executed on a VAX 8800 computer mainly for speed of execution. Information exchange between the PC and the VAX is made through an Ethernet connection which is transparent to the user. Results of execution …