Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 3 of 3
Full-Text Articles in Entire DC Network
Cut Part Count And Increase Dynamic Range In The Hybrid Coupled Attenuator, Chin-Leong Lim
Cut Part Count And Increase Dynamic Range In The Hybrid Coupled Attenuator, Chin-Leong Lim
Chin-Leong Lim
Modern digital modulation formats are generally phase-sensitive. Therefore, the variable attenuators in digital wireless equipment should exhibit minimal phase variation over attenuation. The hybrid coupled attenuator (HCA) has substantially less phase variation than the competing constant-impedance attenuators such as the Pi and the Bridged-T. At microwave frequencies, HCA implementations tend to suffer from reduced dynamic (attenuation) range due to component parasitics, especially when plastic-packaged PIN diodes are selected to lower cost. To maximize the dynamic range in a low-cost 1.9 GHz HCA , we first identified the critical components and then compensated for their deleterious effect. This paper describes the …
Rf Applications Of Pin Diodes, Chin-Leong Lim
Rf Applications Of Pin Diodes, Chin-Leong Lim
Chin-Leong Lim
PIN diodes are the ubiquitous "nuts & screws" components that hold together RF equipment as varied as the television, radio, 2-way radios, WLAN equipment etc. This talk covers PIN diode characteristics and RF applications such as switches, attenuators and limiters. Performance improvement techniques will also be discussed.
Cut Loss In Low-Voltage, Wideband Pin Attenuators, Chin-Leong Lim
Cut Loss In Low-Voltage, Wideband Pin Attenuators, Chin-Leong Lim
Chin-Leong Lim
Many RF applications, including Cable and Satellite TV (CATV / SATV) networks, rely on voltage-variable attenuators (VVAs) for gain adjustment. VVAs consisting of PIN diodes arranged as a PI network are popular in CATV / SATV service owing to their constant impedance, high linearity, multi-decade bandwidth, low part count and compactness. When fabricated from thick bulk PIN diodes for high linearity, the PI VVA configuration typically requires a 0-15V control range. But modern equipment typically operates at 5V or less. Capping the control voltage at 5V adversely raises the VVA's minimum attenuation. To enable low voltage operation without degrading the …