Digital Commons Network^™

Enhanced Optical Bistability With Film-Coupled Plasmonic Nanocubes, Christos Argyropoulos, Cristian Ciraci, David R. Smith

Department of Electrical and Computer Engineering: Faculty Publications

Colloidally synthesized nanocubes strongly coupled to conducting films hold great promise for enhancing different nonlinear optical processes. They exhibit a robust and sensitive scattering response that can be easily controlled by their geometrical and material parameters. Strong local field enhancement is generated at the gap regions between the nanocubes and the metallic film. We show that strong optical bistability and all-optical switching behavior can be obtained by loading these nanogaps with Kerr nonlinear materials. Relatively low input intensities are required to obtain these nonlinear effects. The proposed design can lead to efficient, low-power, and ultrafast all-optical memories and scattering nanoswitches.

Using Software-Based Decision Procedures To Control Instruction-Level Execution, William B. Kimball

AFIT Patents

An apparatus, method and program product are provided for securing a computer system. A digital signature of an application is checked, which is loaded into a memory of the computer system configured to contain memory pages. In response to finding a valid digital signature, memory pages containing instructions of the application are set as executable and memory pages other than those containing instructions of the application are set as non-executable. Instructions in executable memory pages are executed. Instructions in non-executable memory pages are prevented from being executed. A page fault is generated in response to an attempt to execute an …

Ideas: Inquiry-Based Dynamic Earth Applications Of Supercomputing, Seeing The Big Picture With Information Technology, Bruce E. Segee, Yifeng Zhu, Peter O. Koons

University of Maine Office of Research Administration: Grant Reports

The goals of the project were to increase the level and volume of information technologies in the classroom and to promote inquiry-based learning. The project was tightly integrated with the Maine Learning Technology Initiative that puts a laptop computer into the hands of every 7th and 8th grade student and teacher. It was also tightly integrated with the University of Maine Supercomputer. Through the use of technology, students were able to ask “what if questions and find and visualize the answers to their questions. The focus of the inquiry was dynamic Earth modelling. This included geological evolution of the earth …

Mobile Sensor Data Mining, Jeff Lockhart Fcrh '13

The Fordham Undergraduate Research Journal

At an ever increasing rate, the smartphones and other devices people carry with them in their everyday lives are packed with sensors and processing power. This provides an unprecedented opportunity to apply data mining techniques to people’s activities as they go about their daily lives, without changing their routine. The goal of the Wireless Sensor Data Mining (WISDM) Project is to explore the possibilities of data mining on these powerful mobile platforms.1 Data mining involves extracting knowledge from data using computer algorithms. A major sensor in these devices is the tri-axial accelerometer originally included for screen rotation and advanced gaming. …

Data Management In Cloud Environments: Nosql And Newsql Data Stores, Katarina Grolinger, Wilson A. Higashino, Abhinav Tiwari, Miriam Am Capretz

Electrical and Computer Engineering Publications

: Advances in Web technology and the proliferation of mobile devices and sensors connected to the Internet have resulted in immense processing and storage requirements. Cloud computing has emerged as a paradigm that promises to meet these requirements. This work focuses on the storage aspect of cloud computing, specifically on data management in cloud environments. Traditional relational databases were designed in a different hardware and software era and are facing challenges in meeting the performance and scale requirements of Big Data. NoSQL and NewSQL data stores present themselves as alternatives that can handle huge volume of data. Because of the …

Multiplexed Fiber-Ring Laser Sensors For Ultrasonic Detection, Tongqing Liu, Lingling Hu, Ming Han

Department of Electrical and Computer Engineering: Faculty Publications

We propose and demonstrate a multiplexing method for ultrasonic sensors based on fiber Bragg gratings (FBGs) that are included inside the laser cavity of a fiber-ring laser. The multiplexing is achieved using add-drop filters to route the light signals, according to their wavelengths, into different optical paths, each of which contains a separate span of erbium-doped fiber (EDF) as the gain medium. Because a specific span of EDF only addresses a single wavelength channel, mode completion is avoided and the FBG ultrasonic sensors can be simultaneously demodulated. The proposed method is experimentally demonstrated using a two-channel system with two sensing …

Disaster Data Management In Cloud Environments, Katarina Grolinger

Electronic Thesis and Dissertation Repository

Facilitating decision-making in a vital discipline such as disaster management requires information gathering, sharing, and integration on a global scale and across governments, industries, communities, and academia. A large quantity of immensely heterogeneous disaster-related data is available; however, current data management solutions offer few or no integration capabilities and limited potential for collaboration. Moreover, recent advances in cloud computing, Big Data, and NoSQL have opened the door for new solutions in disaster data management.

In this thesis, a Knowledge as a Service (KaaS) framework is proposed for disaster cloud data management (Disaster-CDM) with the objectives of 1) facilitating information gathering …

Reduced Row Echelon Form And Non-Linear Approximation For Subspace Segmentation And High-Dimensional Data Clustering, Akram Aldroubi, Ali Sekmen

Computer Science Faculty Research

Given a set of data W={w1,…,wN}∈RD drawn from a union of subspaces, we focus on determining a nonlinear model of the form U=⋃i∈ISi, where {Si⊂RD}i∈I is a set of subspaces, that is nearest to W. The model is then used to classify W into clusters. Our approach is based on the binary reduced row echelon form of data matrix, combined with an iterative scheme based on a non-linear approximation method. We prove that, in absence of noise, our approach can find the number of subspaces, their dimensions, and an orthonormal basis for each subspace Si. We provide a comprehensive analysis …

On The Interoperability Of Programming Languages Based On The Fork-Join Parallelism Model, Sushek Shekar

Electronic Thesis and Dissertation Repository

This thesis describes the implementation of MetaFork, a meta-language for concurrency platforms targeting multicore architectures. First of all, MetaFork is a multithreaded language based on the fork-join model of concurrency: it allows the programmer to express parallel algorithms assuming that tasks are dynamically scheduled at run-time. While MetaFork makes no assumption about the run-time system, it formally defines the serial C-elision of a MetaFork program. In addition, MetaFork is a suite of source-to-source compilers permitting the automatic translation of multithreaded programs between programming languages based on the fork-join model. Currently, this compilation framework supports the OpenMP and CilkPlus concurrency platforms. …

On Sensorless Collision Detection And Measurement Of External Forces In Presence Of Modeling Inaccuracies, Vahid Sotoudehnejad

Electronic Thesis and Dissertation Repository

The field of human-robot interaction has garnered significant interest in the last decade. Every form of human-robot coexistence must guarantee the safety of the user. Safety in human-robot interaction is being vigorously studied, in areas such as collision avoidance, soft actuators, light-weight robots, computer vision techniques, soft tissue modeling, collision detection, etc. Despite the safety provisions, unwanted collisions can occur in case of system faults. In such cases, before post-collision strategies are triggered, it is imperative to effectively detect the collisions. Implementation of tactile sensors, vision systems, sonar and Lidar sensors, etc., allows for detection of collisions. However, due to …

Big Data, Predictive Analytics, And Data Visualization In The Construction Engineering, Joseph Shrestha

Joseph Shrestha

Situational Awareness/Triage Tool For Use In A Chemical, Biological, Radiological Nuclear Explosive (Cbrne) Environment, John N. Scarlett, Heather L. Gallup, David A. Smith

AFIT Patents

A method of managing patient care and emergency response following a Chemical, Biological, Radiological, or Nuclear Explosive (CBRNE) attack and maintaining compliance with the Health Insurance Portability and Accountability Act (HIPAA). The method including identifying each patient with a unique patient identifier, the identifier based upon the geospatial location of the patient, the geospatial location including at least the latitude and longitude of the patient when first treated, the unique patient identifier being part of patient data. Providing a collection point of patient data to form a patient data database where in the patient location data may be used to …

Surface Treatment Of Fly Ash For Improving The Tensile Strength Of Fly Ash/Unsaturated Polyester Composites, Sugiman Sugiman, Paryanto Dwi Setyawan

Makara Journal of Technology

The paper presents the surface treatment of fly ashes using acid and alkali solution on the tensile strength of the fly ash/unsaturated polyester (UP) composites. Sulfuric acid (H2SO4), hydrofluoric acid (HF) and sodium hydroxide (NaOH) solution with concentration of 0%, 5%, 10%, 15%, and 20% (by weight) were used for surface treatment of fly ashes. Generally, the tensile strength of the treated fly-ash/UP composites shows a significant increase compared to the untreated fly ash. Of all surface treatments studied, the optimum tensile strength was obtained at a concentration of 10%. At this concentration, at a fly ash content of 30% …

Radiation Characteristics Of A Planar Strip Dipole Antenna And A Slot Dipole Antenna For Thz Applications, Catur Apriono, Eko Tjipto Rahardjo

Makara Journal of Technology

The development of a THz system often requires a device that is used to radiate or detect THz waves. One way to fulfill this requirement is to use an antenna. Therefore, we need to consider the radiation characteristics of an antenna working in the THz region. In this paper, we present simulation study of two dipole antennas, i.e. a planar strip dipole antenna and a slot dipole antenna. The simulation results show that a planar strip dipole antenna has a better radiation efficiency (more than 95%) compared to the slot dipole. It also shows that an efficiency of more than …

Recycling Roof Tile Waste Material For Wall Cover Tiles, Ambar Mulyono, Silfia Mona Aryani, Joko Lulut

Makara Journal of Technology

Prior research on roof tile waste treatment has attempted to find the appropriate technology to reuse old roof tile waste by create wall cladding materials from it. Through exploration and experimentation, a treatment method has been discovered to transform the tile fragments into artificial stone that resembles the shape of coral. This baked clay artificial stone material is then processed as a decorative element for vertical surfaces that are not load-bearing, such as on the interior and exterior walls of a building. Before applying the fragments as wall tiles, several steps must be taken: 1) Blunting, which changes the look …

The Effect Of Pressing Temperature And Time On The Quality Of Particle Board Made From Jatropha Fruit Hulls Treated In Acidic Condition, Apri Heri Iswanto, Fauzi Febrianto, Yusuf Sudo Hadi, Surdiding Ruhendi, Dede Hermawan

Makara Journal of Technology

The high of pH of jatropha fruit hulls causes the negative properties of particleboard made from this material. Adjusting the particle acidity and pressing conditions (temperature and time) is among the technical modifications available to improve this particleboard’s properties. Particle acidity has been adjusted in a previous research project, and immersing the particles in acetic acid was found to be the best treatment in this preliminary research. In order to improve the particleboard’s properties, an experiment was conducted to determine the best pressing temperature and time. The objective of the research was to evaluate the influence of pressing temperature and …

Synthesis Of Tungsten Oxide Nanowires Onto Ito Glass Using T-Cvd, Tomy Abuzairi, Bohr-Ran Huang, Tzu-Ching Lin

Makara Journal of Technology

Tungsten oxide is an n-type semiconductor with interesting physical and chemical properties that make it suitable for various technological applications. Tungsten oxide nanowires were synthesized not only at low temperature but also without the use of any catalysts. The tungsten oxide nanowires were synthesized at 550 °C with tungsten layers onto the ITO glass using thermal chemical vapor deposition (T-CVD). The SEM image shows that the tungsten oxide nanowires are effectively grown with the 200 nm tungsten film. The Raman spectra shoulder at ~690 cm-1 proves the synthesized of tungsten oxide nanowires.

Microgrid Development Using A Grid Tie Inverter, Hartono Budi Santoso, Budiyanto Budiyanto

Makara Journal of Technology

The use of renewable energy sources (RES), especially photovoltaic (PV), to meet the demand of electrical energy has been getting a great deal of attention as an alternative solution to electrical energy deficit problems. RES are being applied in power systems in a variety of configurations including microgrid systems. One of the characteristics of a microgrid is capability to supplying power to grid when there is an excess power to supply local load. This research examines the chances of saving power consumption from grid using power converters grid tie inverter (GTI) in a microgrid configuration. The test is done by …

Semiconductor Thermal Neutron Detector, Toru Aoki, Aki Miyake, Takayuki Nakano, Akifumi Koike, Hisashi Morii, Hidenori Mimura

Makara Journal of Technology

The CdTe and GaN detector with a Gd converter have been developed and investigated as a neutron detector for neutron imaging. The fabricated Gd/CdTe detector with the 25 mm thick Gd was designed on the basis of simulation results of thermal neutron detection efficiency and spatial resolution. The Gd/CdTe detector shows the detection of neutron capture gamma ray emission in the 155Gd(n, g)156Gd, 157Gd(n, g)158Gd and 113Cd(n, g)114Cd reactions and characteristic X-ray emissions due to conversion-electrons generated inside the Gd film. The observed efficient thermal neutron detection with the Gd/CdTe detector shows its promise in neutron radiography application. Moreover, a …

Intensity-Demodulated Fiber-Ring Laser Sensor System For Acoustic Emission Detection, Ming Han, Tongqing Liu, Lingling Hu, Qi Zhang

Department of Electrical and Computer Engineering: Faculty Publications

We theoretically and experimentally demonstrate a fiber-optic ultrasonic sensor system based on a fiber-ring laser whose cavity consisting of a regular fiber Bragg grating (FBG) and a tunable optical band-pass filter (TOBPF). The FBG is the sensing element and the TOBPF is used to set the lasing wavelength at a point on the spectral slope of the FBG. The ultrasonic signal is detected by the variations of the laser output intensity in response to the cold-cavity loss modulations from the ultrasonicallyinduced FBG spectral shift. The system demonstrated here has a simple structure and low cost, making it attractive for acoustic …

Testing Virtual Machines For Cadrc Server Hosting, Robin Verweij

Computer Science and Software Engineering

No abstract provided.

Exploring Human-Computer Interaction Through Bluetooth Low Energy Enabled Human Interface Devices, Tyler Durkin

Liberal Arts and Engineering Studies

No abstract provided.

Tascked: The Sanity Promoting Task Manager, Jake Tobin

Computer Science and Software Engineering

Personal task managers or various forms of to-do lists are abundant in our modern computing age. With the explosion of mobile computing technology, it is easier than ever to take notes digitally and make the data seemingly instantly available anywhere on the Internet. There is a fairly well defined core set of features in personal task managers available for public consumption, but it seems nothing that is publicly available provides feedback to the user or suggestions based on user history. Tascked is a task management solution, which records user history and solicits user feedback on progress. This allows the system …

Design And Development Of A Low-Cost Handheld Picoammeter, Malcolm Stagg

Honors Theses

No abstract provided.

Cloud Computing In Kaust Library: Beyond Remote Hosting, Yi Yu

Yi Yu

Enterprise computing is the key strategic approach for KAUST to build its modern IT landscape. In such a strategic direction and technical environment, the library tries to establish library technology by catching new trends which help to make the library more efficient and sufficient. This paper focuses on the cloud computing development in the KAUST library, by using real world scenarios and first-hand experiences to describe what cloud computing means for KASUT library. It addresses the difficulties that were met by the library during the implementation process, how cloud computing affects the functional performance and work procedure of the library, …

Scheduling For A Small Satellite For Remote Sensed Data Collection, Donovan Torgerson, Christoffer Korvalnd, Jeremy Straub, Ronald Marsh

Jeremy Straub

Small satellites, such as CubeSats, serve as excellent platforms for the collection of data that can be supplied to a geographic information system. To serve this need, they require a robust and lightweight task scheduler due to their limited onboard power production capabilities as well as internal space restrictions. Because of these constraints, schedules must be optimized; however, the scheduling optimization process must be performed using limited processing (CPU) power.

Several considerations must be taken into account in order to make a scheduler for these systems. This poster highlights requirements such as inter-dependency of onboard systems, and limited windows of …

Payload Software Design And Development For A Remote Sensing Small Spacecraft, Kyle Goehner, Christoffer Korvald, Jeremy Straub, Ronald Marsh

Jeremy Straub

Scheduling for a Small Satellite for Remote Sensed Data Collection

Exploiting Contextual Information For Prosodic Event Detection Using Auto-Context, Junhong Zhao, Wei-Qiang Zhang, Hua Yang, Michael T. Johnson, Jia Liu, Shanhong Xia

Electrical and Computer Engineering Faculty Research and Publications

Prosody and prosodic boundaries carry significant information regarding linguistics and paralinguistics and are important aspects of speech. In the field of prosodic event detection, many local acoustic features have been investigated; however, contextual information has not yet been thoroughly exploited. The most difficult aspect of this lies in learning the long-distance contextual dependencies effectively and efficiently. To address this problem, we introduce the use of an algorithm called auto-context. In this algorithm, a classifier is first trained based on a set of local acoustic features, after which the generated probabilities are used along with the local features as contextual information …

Broadcasting With Prediction And Selective Forwarding In Vehicular Networks, Jainjun Yang, Zongming Fei

Computer Science Faculty Publications

Broadcasting in vehicular networks has attracted great interest in research community and industry. Broadcasting on disseminating information to individual vehicle beyond the transmission range is based on inter-vehicle communication systems. It is crucial to broadcast messages to other vehicles as fast as possible because the messages in vehicle communication systems are often emergency messages such as accident warning or alarm. In many current approaches, the message initiator or sender selects the node among its neighbors that is farthest away from it in the broadcasting direction and then assigns the node to rebroadcast the message once the node gets out of …

Adaptive Computer‐Generated Forces For Simulator‐Based Training, Expert Systems With Applications, Teck-Hou Teng, Ah-Hwee Tan, Loo-Nin Teow

Research Collection School Of Computing and Information Systems

Simulator-based training is in constant pursuit of increasing level of realism. The transition from doctrine-driven computer-generated forces (CGF) to adaptive CGF represents one such effort. The use of doctrine-driven CGF is fraught with challenges such as modeling of complex expert knowledge and adapting to the trainees’ progress in real time. Therefore, this paper reports on how the use of adaptive CGF can overcome these challenges. Using a self-organizing neural network to implement the adaptive CGF, air combat maneuvering strategies are learned incrementally and generalized in real time. The state space and action space are extracted from the same hierarchical doctrine …