Digital Commons Network^™

Advances Of Cone Penetration Testing In Earthquake Engineering Applications, Robb E.S. Moss, R. Moffat

Civil and Environmental Engineering

The Cone Penetration Test (CPT), because of its precision, accuracy, and utility has been increasingly used in earthquake engineering applications in the last decade. This paper provides a brief survey of recent advances in applying the CPT to; liquefaction triggering, post-liquefaction deformations, cyclic failure of clays, dynamic slope stability, and seismic site response. In granular soils the continuous CPT measurements of tip and sleeve resistance are well correlated with the engineering properties of relative density and friction angle. In clay soils the CPT tip resistance is directly proportional to the undrained shear strength. CPT measurements are ideal for weak or …

A Case Study On Achieving 100% Customer Satisfactory Homes In Production Home Building, Garrett Whitlock

Construction Management

No abstract provided.

Enhancing Capacity And Managing Demand To Increase Short-Term Throughput On The San Francisco-Oakland Bay Bridge, Kevin Reid Carstens

Master's Theses

While there are many proposals for fixing congestion between San Francisco and Oakland in California by adding a new bridge or tube, these solutions will take decades to implement even though a solution is needed now. This thesis assesses sixteen different strategies for reducing congestion in the short-term in the four categories of improving transit, promoting carpooling, implementing intelligent transportation systems practices, and incentivizing alternatives to using the Bay Bridge. Top priorities include HOV improvements on the West Grand Avenue and Powell Street onramps, altering WestCAT Lynx and BART transit services, partnering with rideshare apps to increase transit station accessibility …

Photovoltaic Installation In Ecuador And The Amazon, David Mulder

Construction Management

The Photovoltaic Installation in Ecuador and The Amazon is part of a collaborative effort between two major construction clubs at Cal Poly: NECA and MCAA. Four students, two from each club, traveled with two faculty to install photovoltaics for two different communities. The first project was a solar installation to provide fresh water for the community of Santa Rosa. Project number two, was a sixteen-panel installation in Shell, Ecuador for the non-profit Reach Beyond. The main goals of each project were to provide fresh water, and achieve net zero electrical consumption.

Technology Adoption By California Central Coast Contractors, Nicholas A. English

Construction Management

Technology is trending in Construction, but it is unclear if smaller contractors have kept up with these trends like larger national companies have. This survey of San Luis Obispo County specialty and general contractors queried technology adoption, specific software use, estimator age, and opinions of various estimating attributes. It found that the majority of contractors use traditional estimating and quantity takeoff methods, the majority of contractors are 31 years old or older, and that local estimators value experience and knowledge as opposed to computer expertise. Local contractors recognize the value technology can provide, but have not adopted it in a …

Carpenters Apprenticeship Internship: Student And Industry Perspectives, Chris Falco

Construction Management

The Carpenters Apprenticeship Internship program is designed to provide students the opportunity to work as a construction laborer and get hands-on work experience. The goal of this study is to address the perceived benefits of the Carpenters Apprenticeship Internship with respect to the students, the industry members, and the union. In looking at the benefits this opportunity presents, any value that is aligned among the parties involved will be highlighted to convey the mutual advantages. Lastly, the demand among students for experience such as this will be assessed to see what the perceived value of labor experience is among students …

Feasibility Study Of Using Recyclable Polyethylene (Pet) Materials As Coarse Aggregate For Concrete Mixtures, Philip M. Angelo

Construction Management

The feasibility of using recyclable household plastics, specifically those made of polyethylene, commonly used in water and soda bottles, as a replacement for concrete coarse aggregate, was assessed. A method was developed for cutting polyethylene materials into fibrous strips. These strips were then used as a replacement for the rock coarse aggregate in batches of concrete. Standard 6” x 12” test cylinders were made using the concrete mixture and subject to destructive compressive testing in order to yield the compressive strength of the concrete mix 7, 14, 21, and 28 days after pouring. Three mixtures were tested, one control with …

Kihefo Vocational Center: Kabale, Uganda, Jason Matthew Angerer

Construction Management

Journeyman International (JI) is a non-profit organization which acts as a platform for bringing together volunteer Architects, Designers, Engineers, and Construction Managers with humanitarian projects around the world. Kigezi Healthcare Foundation (KIHEFO) a non-profit NGO located in Kabale, Uganda is a client seeking to build a vocational center to educate the workforce of Uganda. The center will include multi-purpose class rooms, a dining hall, rabbit farm, carpentry shop, and living complex. The Architect on the project was Courtney Wedel from Cal Poly. As the Construction Manager on the project my responsibilities include; Design Assist, Feasibility Analysis, Scheduling, Estimating, and Managing …

Construction Of A Chicken Coop For Use By An Early Education Facility, Luke Cypress

Construction Management

There is a demand in the early education field for methods of exposing early learners to where our food comes from and how it’s produced. An excellent source of this exposure is commonly utilized in an onsite chicken-coop. These coops are in essence working farms, producing eggs and in some cases meat. While coops are not prohibitively expensive they often fall outside the scope of normal operating or educational budgets and can be difficult to fund. The purpose of this project was to identify a school that could use and benefit from a coop at no cost to the school. …

Lap Splice Development Length Of Rebar In Stabilized Hollow Interlocking Compressed Earth Blocks, Thomas S. Bowdey

Master's Theses

This thesis investigates the tensile performance of unconfined lap splices in specimens constructed from interlocking compressed earth block (ICEB) units. All lap splice specimens were constructed from hollow ICEB half units with one side grouting channel. ICEB units used in this research were exclusively produced from the Soeng Thai Model BP6 block press. The BP6 block press is currently manufactured in Thailand under the guidance and direction of the Center of Vocational Building Technologies (CVBT). All ICEB units and grout constructed for this research were created from mix proportions of soil, sand, cement, and water. Rebar bar sizes were restricted …

Determination Of Seismic Earth Pressures On Retaining Walls Through Finite Element Analysis, Michael Iannelli

Master's Theses

Seismic pressures on displacing or rigid retaining or basement walls have been derived based on the original work of Mononobe and Okabe, who used a shake table to calculate dynamic pressures of displacing retaining walls existing in cohesionless soils. Since this original work was done over eighty years ago, the results of Mononobe and Okabe, colloquially known as M-O theory, have been applied to different conditions, including non-displacing basement walls, as well as changes in soil properties. Since the original work of M-O, there have been numerous studies completed to verify the accuracy of the original calculation, most notably the …

Field Emissions Of (Hydro)Chlorofluorocarbons And Methane From A California Landfill, Alexander H. Sohn

Master's Theses

A comprehensive field investigation was conducted at Potrero Hills Landfill (PHL) located in Suisun City, California to quantify emissions of twelve (hydro)chlorofluorocarbons (i.e. F-gases). The specific target constituents for this study included CFC-11, CFC-12, CFC-113, CFC-114, HCFC-21, HCFC-22, HCFC-141b, HCFC-142b, HCFC-151a, HFC-134a, HFC-152a, and HFC-245fa. The majority of the F-gas emission studies have been conducted outside of the United States and very limited field landfill emission data are available in the United States. Because of historical usage of blowing agents in insulation foams including CFC-11, HCFC-142b, HFC-134a, and HFC-245fa, models reported in literature predicted high F-gas emissions from a landfill …

Teaching Consolidation: Case Study Of Preloading With Vertical Drains, Robb Moss, Judd King, Gregg Fiegel

Civil and Environmental Engineering

This paper describes a ground improvement case study where preloading and prefabricated vertical drains (PVDs) were used to accelerate foundation settlements. The case study is used in a classroom setting with the learning objective of introducing engineering students to methods for estimating settlement of shallow foundations on compressible soils. The project site was developed for a corporate retail chain planning to open a new facility in San Luis Obispo, California. Up to 2.5 meters of fill were needed across much of the site to raise foundations and improvements above the flood elevation. Loads from the fill and the structure were …

Site Response Analysis Considering Strain Compatible Site Period, Hoss Hayati, Robb E.S. Moss

Civil and Environmental Engineering

In practice it is common to estimate site effects using a single proxy, or single variable such as 30 m shear wave velocity (V_S30) or site period. Many studies have investigated merits of proposed proxies with contradicting recommendations. Yet, most studies indicate the single proxy approach is less than ideal, resulting in large uncertainty. To provide a better understanding of components that drive site response, we performed a parameterized study on 19 shallow soil profiles with V_S ranging from 150 m/s to 400 m/s. We propagated 74 input motions through each soil column using one-dimensional equivalent-linear …

Site Response Analysis Considering Strain Compatible Site Period, Hoss Hayati, Robb E.S. Moss

Civil and Environmental Engineering

In practice it is common to estimate site effects using a single proxy, or single variable such as 30 m shear wave velocity (V_S30) or site period. Many studies have investigated merits of proposed proxies with contradicting recommendations. Yet, most studies indicate the single proxy approach is less than ideal, resulting in large uncertainty. To provide a better understanding of components that drive site response, we performed a parameterized study on 19 shallow soil profiles with V_S ranging from 150 m/s to 400 m/s. We propagated 74 input motions through each soil column using one-dimensional equivalent-linear …

Nonparametric Liquefaction Triggering And Postliquefaction Deformations, J. S. Yazdi, Robb Moss

Civil and Environmental Engineering

This study evaluates granular liquefaction triggering case-history data using a nonparametric approach. This approach assumes no functional form in the relationship between liquefied and nonliquefied cases as measured using cone penetration test (CPT) data. From a statistical perspective, this allows for an estimate of the threshold of liquefaction triggering unbiased by prior functional forms, and also provides a platform for testing existing published methods for accuracy and precision. The resulting threshold exhibits some unique trends, which are then interpreted based on postliquefaction deformation behavior. The range of postliquefaction deformations are differentiated into three zones: (1) large deformations associated with metastable …

Post-Liquefaction Residual Strength Assessment Of The Las Palmas, Chile Tailings Failure, Tristan Reyes Gebhart

Master's Theses

Assessment of post-liquefaction residual strength is needed for the development of empirically-based, predictive correlations for earthquake engineering design. Previous practice commonly assigned negligible strengths to liquefied materials for engineering analysis, producing overly-conservative designs. Increasingly available case history data, and improved analytical tools have allowed for more accurate and less overly-conservative estimation of soil residual strength, improving empirical predictive models. This study provides a new case history to the limited suite of (approximately 30) liquefaction failure case histories available for post-liquefaction in-situ strength predictive correlations.

This case history documents the Las Palmas gold mine tailings dam failure, resulting from seismic-induced liquefaction …

Heat Management Strategies For Msw Landfills, Nazli Yesiller, James L. Hanson, Kevin B. Kopp, Emma H. Yee

Civil and Environmental Engineering

Heat is a primary byproduct of landfilling of municipal solid waste. Long-term elevated temperatures have been reported for MSW landfills under different operational conditions and climatic regions around the world. A conceptual framework is presented for management of the heat generated in MSW landfills. Three main strategies are outlined: extraction, regulation, and supplementation. Heat extraction allows for beneficial use of the excess landfill heat as an alternative energy source. Two approaches are provided for the extraction strategy: extracting all of the excess heat above baseline equilibrium conditions in a landfill and extracting only a part of the excess heat above …

The Design And Construction Of A Rear Bumper With Incorporated Spare Tire Rack, Alan C. Isaacson

BioResource and Agricultural Engineering

This senior project outlines the design and construction of a rear bumper with incorporated spare tire and equipment rack for a 1946 Willys CJ2A Jeep. The spare tire rack is capable of swinging out away from the vehicle to allow for the use of the vehicle’s tailgate. The bumper was designed for strength, functionality and aesthetic qualities alike. Additionally, the bumper design considered all vehicle codes and regulations.

Crp 463: University Area Multi-Modal Access Plan June 2016, William Riggs, Sam Anderson, Spencer Johnson, Garrett Wank, Alex Hunt, Lauren Leedeman, Roberto Contreras, Mark Manha, Emma Petersen, Rebecca Wysong, Shannon Boston, Augustus Grochau, Matthew Wiswell, Jerome Wu, Crp 463 Senior Project Professional Practice

City and Regional Planning Studios and Projects

This study outlines work completed as a part of the CRP 463 senior capstone class outlining a new, comprehensive approach to active transportation on the Cal Poly campus. Led by Dr. William Riggs the project assessed the current conditions, identified opportunities and constraints and then developed conceptual options for a campus active transportation plan. In addition to this process the plan involved completion of a draft Bicycle Friendly University application for the Cal Poly campus (included as a supplemental file) and envisioned conceptual design options for various locations on the campus. Key locations evaluated included the Perimeter Road / University …

Retrofitting Adobe Buildings, Ashley V. Gaur, Jessica E. Ellis

Architectural Engineering

No abstract provided.

Broad Street Apartments, Carla Alejandra Simental, Viviana C. Sanchez

Architectural Engineering

No abstract provided.

Experimental Building Demonstration Model With Viscous Fluid Dampers, Blake Thomas Reeve, Brianna Jean Kufa, Aden Malek Stepanians, Sophie Carmion Ratkovich

Architectural Engineering

The Architectural Engineering major places a heavy emphasis on structural dynamics and the role of wind and seismic loading in building analysis and design. Buildings of high importance that are critical to community function, such as hospitals, often utilize supplemental damping devices like supplemental viscous fluid dampers or base isolators to reduce the overall demands on the structural system. The design and analysis of these dampers are typically not taught at the undergraduate level, and is frequently performed by mechanical engineers, in lieu of structural engineers.

To better understand and research building behavior with supplemental damping devices, our multi-disciplinary team …

Structural Calculations For Nepal Vocational Learning Center, Nicholas Petrarca

Architectural Engineering

This project goal is to build a Leadership Vocational School for youth, women, differently abled, and local leaders of rural and Kathmandu Nepal. The client for this project is an organization called Sakcham Rural Nepal and they partnered with a humanitarian organization called Journeyman International to find Architecture and Architectural Engineering students to design a safe, attractive and functional building to fit their needs.

Comparison Of Energy Analysis Platforms For Title 24compliance, Holli L. Tripp

Construction Management

The 2013 Building Energy Efficiency Standards for Low-Rise Residential Buildings allow users to demonstrate compliance via two methods: performance or prescriptive. Prescriptive documentation requires analysis to be conducted by-hand while performance compliance utilizes computer modeling software to analyze trade-offs, and demonstrate compliance through alternative building design parameters. Typically computer demonstrated compliance via the performance method is the most popular choice because it allows for complex buildings to be analyzed using their actual metrics which results in a more accurate report of proposed energy consumption (Ross, 2016). This method however requires additional software outside of the tools that architects and designers …

Integrating Bim To The Construction Industry: The Hardships, Benefits, And An Unyielding Educational Gap Between Technology And Field Application, Torrie Peth

Construction Management

In recent years, Building Information Modeling has taken the construction industry by storm and revolutionized the construction process entirely. It allows for trades to coordinate more efficiently and effectively, while providing a hands-on, 3D overview of a structure being built. Certain characteristics are more easily adoptable by existing companies than others, but there are vast "fallacies of hype" in the concept. This study will examine the effects as BIM, positive and negative, and its current usage in industry. In addition it will identify the gap developing between students exiting the university setting that has a strong emphasis on technological integration, …

Exploring Data Driven Models Of Transit Travel Time And Delay, Bobjot Singh Sidhu

Master's Theses

Transit travel time and operating speed influence service attractiveness, operating cost, system efficiency and sustainability. The Tri-County Metropolitan Transportation District of Oregon (TriMet) provides public transportation service in the tri-county Portland metropolitan area. TriMet was one of the first transit agencies to implement a Bus Dispatch System (BDS) as a part of its overall service control and management system. TriMet has had the foresight to fully archive the BDS automatic vehicle location and automatic passenger count data for all bus trips at the stop level since 1997. More recently, the BDS system was upgraded to provide stop-level data plus 5-second …

Pervious Pavement Systems For High Traffic Roadways, Kevin M. Smith

Construction Management

This report highlights the benefits and detriments of pervious pavement systems through research of existing knowledge and multifaceted experiments to determine the feasibility of implementing a pervious pavement system on high traffic roadways. With over 40,000 miles of highway in the United States alone and severe water crises in states like California and growing environmental and safety concerns, the need for pervious pavements is abundantly clear. The research conducted utilizes existing knowledge on pervious pavements and applies it to the application of high traffic roadways. The experiment tests four different pervious concrete mix designs to determine compressive strength and water …

Regrowth Of Chlorella Sorokiniana On Recycled Media With Replenished Nutrients, William H. Spence

Master's Theses

Growth media recycling during algae cultivation is necessary to increase the efficiency and reduce the cost of biofuel production from algae feedstocks. Without recycling media, the cost of algae based biofuel production would be prohibitively high and large scale algae based biofuel production would not be economically viable. The ratio of media recycled to media wasted assumed for algae farms is generally calculated to maintain salt concentrations below growth inhibitory levels, ignoring the influence of secondary metabolites which might decrease productivity. Secondary metabolites, which include allelopathic or auto-inhibitory biological contaminants, might lead to the accumulation of growth-inhibiting compounds in recycled …

Ncma Groundwater Model Using Usgs Modflow-2005/Pest, Brian Matthew Wallace

Master's Theses

A numerical model for the NCMA aquifer complex is presented. The objective of the study is to develop a numerical groundwater model for the NCMA aquifer system to enhance the understanding of subsurface groundwater flow. Infiltration, streamflow, pumping, and return flows are implemented to characterize the aquifer complex over time. The numerical model is calibrated to municipal and monitoring well data, average monthly water balances, and hydraulic contours. Transient aquifer inflows and outflows are assessed in the results of the study and are compared to balance terms from previous studies. The 2007 Todd Engineers Study subsurface inflows and outflows generate …