Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Asphalt (3)
- Accelerated bridge construction (2)
- Adsorption (2)
- Moisture-induced damage (2)
- Transportation (2)
-
- Accelerated Bridge Construction (1)
- Adhesive (1)
- Agricultural (1)
- Alternative dust control (1)
- Alternative ice control (1)
- Aluminum (1)
- Analytical Model (1)
- Aqueous wastes (1)
- Asphalt binder (1)
- Asphalt mix (1)
- Binder bond strength (1)
- Bioreactors (1)
- Bridge Columns (1)
- Bridge Inspection (1)
- Buckling restrained reinforcement (1)
- Cellulose Nanofibers (1)
- Chloride salt (1)
- Connection (1)
- DMS (1)
- Damage Quantification (1)
- Desorption (1)
- Distribution Factors (1)
- Double Tee Bridge (1)
- Ductility (1)
- Dynamic Load Allowance (1)
- Publication Year
Articles 1 - 30 of 45
Full-Text Articles in Entire DC Network
Evaluation Of Aashto Seismic Design For Reinforced Concrete Bridge Columns, Andrew Leroy Grismer
Evaluation Of Aashto Seismic Design For Reinforced Concrete Bridge Columns, Andrew Leroy Grismer
Electronic Theses and Dissertations
Bridge failure can be catastrophic resulting in casualties and limiting the accessibility and emergency response efforts. Ensuring a high level of ductility for bridge columns through sufficient design methods and detailing is the most important aspect of the modern seismic codes. Reinforced concrete (RC) bridge columns are widely used in multi-span bridges located in seismic regions of the nation due to their controlled ductility and durability. The objective of this study was to systematically evaluate the AASHTO seismic design requirements for RC bridge columns and to comment on whether current bridge code is sufficient and safe. An extensive literature review …
The Impact Of Precipitation As An Adverse Weather Condition On Transportation Construction In South Dakota, Akosua Ofosua Okyere-Addo
The Impact Of Precipitation As An Adverse Weather Condition On Transportation Construction In South Dakota, Akosua Ofosua Okyere-Addo
Civil and Environmental Engineering Graduate Students Plan B Capstone Projects
This research assessed the impact of precipitation as an adverse weather condition on the transportation construction in South Dakota. A statistical survey of the data from the National Oceanic and Atmospheric Administration was conducted on 554 original stations, which was reduced to 433 stations of them were in South Dakota, then reduced to 170 stations with 30-year data coverage higher than 70 %. Eventually, the data were reduced further for pilot study purposes to a final 10 stations used for analysis in this study. The objective of this study is to examine potential precipitation thresholds towards determination of related adverse …
Multiscale Evaluation Of The Effect Of Deicing Agents And Environmental Conditions On The Performance Of Asphalt Pavements In Cold Regions, Maryam Mihandoust
Multiscale Evaluation Of The Effect Of Deicing Agents And Environmental Conditions On The Performance Of Asphalt Pavements In Cold Regions, Maryam Mihandoust
Electronic Theses and Dissertations
More than 70% of the United States' roadway network is located in regions subjected to severe winters, resulting in icy pavements that pose safety risks. Winter maintenance operations involving chloride-based deicers such as NaCl, CaCl2, and MgCl2 are essential for ensuring the safety, mobility, and functionality of roads. However, these deicers can lead to diminished pavement durability due to moisture-induced damage. This study examined the effects of these deicers on adhesion evolution and moisture-induced damage mechanisms of asphalt binder-aggregate systems at the macro-, centi-, micro-, and nanoscales. Macro-scale performance characteristics of PG 58-34 hot mix asphalt (HMA) specimens, including rutting, …
Electrospun Recycled Polyethylene Terephthalate Microfibers As An Asphalt Mix Additive, Debbrata Datta
Electrospun Recycled Polyethylene Terephthalate Microfibers As An Asphalt Mix Additive, Debbrata Datta
Electronic Theses and Dissertations
In recent decades, the use of different types of fibers in asphalt has become increasingly popular. Fibers are used in an asphalt mix to improve its durability and resistance against distresses such as rutting and cracking due to repetitive vehicle loading at high temperatures, and low-temperature contraction. Consequently, accurate rheological and performance characterization of asphalt binders and mixes containing fibers is of vital importance. With increased concerns over the environmental disruptions as a result of disposing end-of-life plastics in landfills and the need for improving sustainability of the construction materials, incorporating plastic in construction materials has always been an important …
An Analysis Of The Effect Of Temperature On Asphalt Paving In South Dakota, S M Rahat Rashedi
An Analysis Of The Effect Of Temperature On Asphalt Paving In South Dakota, S M Rahat Rashedi
Electronic Theses and Dissertations
Temperature is an important parameter to consider for asphalt paving since this work is generally susceptible to weather due to outdoor construction. The South Dakota Department of Transportation (SDDOT) developed working day weather charts in 1998 to address the expected adverse weather days. This thesis investigated the effect of temperature on adverse weather days for asphalt paving and compared them to the value reported in the 1998 SDDOT study. Moreover, the thesis also examined how closely the maximum temperature data from project sites' weekly progress reports (WPR) matched the data from the closest weather stations. When the maximum temperature (TMAX) …
Comparison Of Phosphorus Removal And Recovery Methods And Proposed Design Of High Rate Algal Pond For Swine Wastewater, Taylor Fauth
Comparison Of Phosphorus Removal And Recovery Methods And Proposed Design Of High Rate Algal Pond For Swine Wastewater, Taylor Fauth
Civil and Environmental Engineering Graduate Students Plan B Capstone Projects
High phosphorus concentrations in wastewater effluent can have harmful effects to aquatic environments and water quality. An excess of nutrients such as phosphorus in water bodies will cause eutrophication, which depletes the available oxygen within the water and is detrimental to aquatic life. Additionally, phosphorus leaching from wastewater discharge has negative impacts to groundwater quality. The depletion of phosphorus as a natural resource is also of concern as phosphorus is an essential product for agricultural and industrial production. Phosphorus is a non-renewable resource, and natural sources are becoming more difficult and expensive to access. Therefore, the removal and recycle of …
Mechanically Spliced Precast Bridge Columns, Ted Sjurseth
Mechanically Spliced Precast Bridge Columns, Ted Sjurseth
Electronic Theses and Dissertations
Mechanical bar splices provide an alternative to the traditional method of lap splicing to achieve reinforcement bar continuity in reinforced concrete. Even though mechanical bar splices can be used as new precast column connections to accelerate the bridge construction (ABC), The use of bar couplers in the plastic hinge region of bridge columns is prohibited by the current US codes since the effects of bar couplers on the seismic behavior of columns is not fully investigated. A bridge column including precast columns with couplers located in a high seismic region must be designed to handle large inelastic lateral deformations. The …
A Speciation Modeling Study Of Heavy Metal Adsorption To Plastic In Municipal Wastewater Treatment Plant Units, Kaitlyn Hague
A Speciation Modeling Study Of Heavy Metal Adsorption To Plastic In Municipal Wastewater Treatment Plant Units, Kaitlyn Hague
Electronic Theses and Dissertations
Microplastics are an emerging concern due to their harmful effect to organisms and their ability to facilitate transport of contaminants including heavy metals. Microplastics can enter the environment through wastewater treatment plants, landfill leachate, and littering. Once in the environment microplastics can be distributed throughout rivers, the ocean, and lakes. In order to understand the adsorption of heavy metals to microplastics a geochemical modeling study was completed using Visual Minteq. Lab tests were completed to better understand what constituents are available in wastewater at four different locations: influent, clarifiers, digesters, and effluent. These constituents were then used to observe how …
Seismic Performance Of Mechanically Spliced Precast Bridge Columns With New Couplers, Evan Greeneway
Seismic Performance Of Mechanically Spliced Precast Bridge Columns With New Couplers, Evan Greeneway
Electronic Theses and Dissertations
Lap splicing is not always the most economical or practical approach to achieve reinforcement bar continuity. Mechanical bar splices, or bar couplers, are one alternative that may be far more practical. Currently, the US codes do not allow for the use of bar couplers in the plastic hinge region for RC members in areas of high seismic activity. There has not been enough research into the couplers behavior when subjected to significant inelastic lateral deformations. The Lohr Structures Laboratory was used to conduct an experimental study on campus of South Dakota State University to evaluate the seismic performance of mechanically …
Nitrate And Phosphate Removal From Denitrification Bioreactors Using Woodchips, Steel Chips And Agricultural Residue Media, Abdoul Aziz Kouanda
Nitrate And Phosphate Removal From Denitrification Bioreactors Using Woodchips, Steel Chips And Agricultural Residue Media, Abdoul Aziz Kouanda
Electronic Theses and Dissertations
Nitrate and phosphate present in agricultural subsurface drainage water can impact surface water quality thus impacting the environment and human health by causing eutrophication and Methemoglobinemia in young infant. Biological denitrification and phosphate adsorption filters are treatments options that can help reduce nitrate and phosphate concentration from agricultural subsurface drainage before it can be discharged in surface water. The first objective of this dissertation was to determine the Michaelis-Menten kinetics model parameters for nitrate removal in bioreactors using the fresh, aged, and composted woodchips. The composted woodchips achieved a denitrification rate 2.4 times higher than the fresh woodchips which was …
Effects Of Cellulose Nano-Fiber As An Additive On Performance Of Asphalt Binders And Mixes, Marco Paulo Pereira Castro
Effects Of Cellulose Nano-Fiber As An Additive On Performance Of Asphalt Binders And Mixes, Marco Paulo Pereira Castro
Electronic Theses and Dissertations
Findings of a study conducted on asphalt binders and mixes modified by addition of cellulose nanofiber (CNF) to evaluate the feasibility of them as an additive is presented in the current thesis. Cellulose Acetate (CA) is an ester of cellulose and is obtained by the reaction of cellulose with acetic anhydride and acetic acid in the presence of sulfuric acid. Due to its high temperature sensitivity, high ductility, large surface area, high strain resistance, and low electrical resistivity, cellulose acetate can be used for several application. The question is if CNF can be used as an additive in the asphalt, …
Seismic Performance Of Mechanically Spliced Bridge Columns Through Analytical Studies, Mathew Ray Lavoy
Seismic Performance Of Mechanically Spliced Bridge Columns Through Analytical Studies, Mathew Ray Lavoy
Electronic Theses and Dissertations
Reinforcement continuity in concrete members is traditionally achieved through lap splicing. Mechanical bar splices are an alternative to traditional lap splices. Mechanical bar splices utilize mechanical devices known as bar coupler to connect the ends of reinforcing bars. Bar couplers are common in accelerated bridge construction applications at non-critical members but are not allowed in the plastic hinge region of bridge columns probably due to a lack of knowledge on how they affect seismic performance of columns. A comprehensive analytical study was carried out to determine how bar couplers used at the base of bridge columns affect: 1) column lateral …
Structural Performance Evaluation Of Dynamic Message Signs With Adhesive And Welded Joints, Ibin Amatya
Structural Performance Evaluation Of Dynamic Message Signs With Adhesive And Welded Joints, Ibin Amatya
Electronic Theses and Dissertations
The ultimate objective of this study was to determine the structural performance of the Dynamic Message Sign (DMS) bonded with chemical adhesive in terms of ultimate strength and fatigue strength. To achieve this objective, this study first investigated the effects of various parameters, including humidity and temperature on tensile, shear, peel, and cleavage strength through small-scale tests of adhesive specimens with variation in specimen width. The tensile, shear, peel, and cleavage specimens were conditioned in a temperature-humidity controlled chamber prior to its testing. The tensile, shear, peel, and cleavage specimens with different widths were tested according to American Society for …
Field And Numerical Study For Deteriorating Precast Double-Tee Girder Bridges, Brian Kidd
Field And Numerical Study For Deteriorating Precast Double-Tee Girder Bridges, Brian Kidd
Electronic Theses and Dissertations
Two deteriorating DT bridges in South Dakota, both over 30-years old, were field tested with a static and dynamic load. From the recorded strain values, the liveload distribution factors (LLDFs) and dynamic load allowance (IM) factors were calculated. The AASHTO LRFD and AASHTO Standard Specifications were compared with the field LLDFs and IMs. It was determined that the AASHTO LRFD Specifications were conservative for deteriorating DT girder bridges, with two exceptions. The AASHTO Standard codified LLDFs were significantly higher than the field LLDFs in all cases. The AASHTO LRFD and AASHTO Standard specifications were conservative when calculating the IM factors …
Repairable Moment-Resisting Steel Buildings, Heath William Pederson
Repairable Moment-Resisting Steel Buildings, Heath William Pederson
Electronic Theses and Dissertations
Current seismic design codes ensure life safety for buildings, but structural members may significantly yield or even fail under strong earthquakes. A new design approach is to implement connections that localize the yielding and failure to fuses. A more sophisticated approach is to be able to replace the fuses after the event. The present study was carried out to develop repairable moment-resisting (MR) connections for steel buildings and to investigate their seismic performance through nonlinear finite element analyses (FEA). Two details were proposed using buckling restrained fuses (BRFs) and buckling restrained reinforcement (BRR). Test data was collected from the literature …
Escherichia Coli Removal From Stormwater Using Steel Chips Filter, Peng Dai
Escherichia Coli Removal From Stormwater Using Steel Chips Filter, Peng Dai
Electronic Theses and Dissertations
Media filtration has received increasing attention as an effective technology that can facilitate the removal of particles and dissolved pollutions in the stormwater. However, most traditional media filtration systems are generally ineffective in removing bacteria, causing pollution of groundwater and receiving surface water. In this study, recycled steel chips were evaluated as low-cost filter materials for bacterial removal from stormwater. Laboratory column experiments were conducted to evaluate the impact of steel chips particle size, flow rate, initial E.coli concentration, pH, natural organic matter (NOM), steady and intermittent flow on E.coli removal. The results showed that E.coli removal decreased from 99.4% …
Mechanical Bar Splices For Accelerated Construction Of Bridge Columns, Puskar Kumar Dahal
Mechanical Bar Splices For Accelerated Construction Of Bridge Columns, Puskar Kumar Dahal
Electronic Theses and Dissertations
Mechanical bar splicing is an alternative method of connecting reinforcing bars in concrete structures compared to conventional lap splicing mainly to reduce bar congestion in joints. Recently, mechanical bar splices, which are also referred to as bar couplers, have been used to connect precast members to accelerate construction of concrete bridges and buildings. Current codes prohibit the use of couplers in the plastic hinge regions of bridge columns in high seismic zones. This may be because of a lack of systematic test data on the coupler performance, limited experimental studies on mechanically spliced bridge columns, and an engineering precaution. The …
Evaluation Of The Moisture-Induced Damage Potential Of Asphalt Mixes And Asphalt Binder-Aggregate Systems, Rajan Acharya
Evaluation Of The Moisture-Induced Damage Potential Of Asphalt Mixes And Asphalt Binder-Aggregate Systems, Rajan Acharya
Electronic Theses and Dissertations
The current thesis presents the findings of a study conducted on asphalt mixes to evaluate their moisture-induced damage potential through testing of the plant produced asphalt mixes in South Dakota using local aggregates and commonly used asphalt binders. The moisture-induced damage potentials of the asphalt mixes were evaluated by conducting tensile strength ratio (TSR) and modified Semicircular Bend (SCB) tests. The effect of moisture on asphalt binder-aggregate adhesion was evaluated by conducting binder bond strength (BBS) test on binder-aggregate systems. The asphalt mixes tested in this study included a hot mix asphalt (HMA) containing hydrated lime (1% by the weight …
Repairable Precast Buildings And Bridges, Abdullah Boudaqa
Repairable Precast Buildings And Bridges, Abdullah Boudaqa
Electronic Theses and Dissertations
A new moment-resisting precast connection is developed in the present work through experimental and analytical studies to accelerate construction of bridges and buildings, to improve their seismic performance, and to quickly repair them through replacement of exposed reinforcement. The new precast joint detailing incorporates (1) detachable external reinforcing steel bars restrained against buckling, which is referred to as buckling restrained reinforcement (BRR), to develop plastic bending moments, (2) a steel pipe connecting the precast members through a pin connection to resist plastic shear forces, and (3) detachable mechanical bar splices to assemble and disassemble BRR at any time specifically after …
Laboratory Evaluation Of Internal And External Nutrient Removal To Control Algal Bloom In Eutrophic Lakes, Sepideh Sadeghi
Laboratory Evaluation Of Internal And External Nutrient Removal To Control Algal Bloom In Eutrophic Lakes, Sepideh Sadeghi
Electronic Theses and Dissertations
Eutrophication is one of the most widespread water quality problems in lakes and reservoirs. Frequent cyanobacterial blooms resulting from eutrophication can greatly damage aquatic ecosystems and pose a high risk to human health. Phosphorus (P) and nitrogen (N) are the major causes for eutrophic conditions and can enter to the aquatic ecosystem via different sources. The combination of phosphorus precipitation and sediment capping are promising technologies to minimize internal P loading and control harmful algal blooms in eutrophic lakes. Denitrification bioreactors have emerged as an important edge-of-field treatment technology to reduce nitrate-nitrogen loads from external sources. The objective of this …
Compaction Testing Of Granular Material, Jason Jerome Weber
Compaction Testing Of Granular Material, Jason Jerome Weber
Electronic Theses and Dissertations
The South Dakota Department of Transportation SDDOT uses the Ohio Highway Department’s Typical Moisture Density Curves for preforming compaction quality control on granular soil materials in junction with standard moisture density relations. The SDDOT also uses the Nuclear Density Gauge NDG, Sand Cone, and Rubber Balloon methods to conduct in-situ density tests. Compaction quality control of recycled pavements is conducted using test strips. The test strip method works well for large areas but becomes problematic for small areas. The ODOT Materials Manual states “Moisture-Density proctor curves and controls were originally developed to be used on cohesive (clays and silts) soils. …
Evaluation Of The Effect Of Tack Coat Type, Application Rate, And Surface Type On Interlayer Shear Strength, Chamika Prashan Dharmarathna
Evaluation Of The Effect Of Tack Coat Type, Application Rate, And Surface Type On Interlayer Shear Strength, Chamika Prashan Dharmarathna
Electronic Theses and Dissertations
Tack coat is an asphaltic material applied between asphalt pavement layers. Since pavement is a multilayered structure, it is highly important to make proper bond between the layers to achieve a monolithic behavior. Hence, inadequate bond due to application of inadequate amount of tack coat may lead to poor structural behavior and premature failure. Also, applying excessive amount of tack coat may lead to layer slippage and binder migration. Therefore, it is highly important to apply an optimum amount of tack coat between layers. Over the past decades several studies have been conducted to determine the optimum tack coat application …
Uav-Based Bridge Inspection And Computational Simulations, Luis Duque
Uav-Based Bridge Inspection And Computational Simulations, Luis Duque
Electronic Theses and Dissertations
The use of Unmanned Aerial Vehicles (UAV), commonly known as drones, has significantly increased in the field of civil engineering due to the poor condition of the United States’ infrastructure. The American Society of Civil Engineers (ASCE) recently reported that more than 9.1% of the United States’ bridges were structurally deficient and required attention and maintenance to ensure appropriate structural performance. Meanwhile, current practices are expensive and unsafe for bridge inspectors, requiring innovative and safer methods for the study of bridges. The goal of this paper was to identify better techniques to not only inspect, quantify, and determine the effect …
Evaluation Of Woodchip Bioreactor Denitrification Kinetics, Abdoul Aziz Kouanda
Evaluation Of Woodchip Bioreactor Denitrification Kinetics, Abdoul Aziz Kouanda
Electronic Theses and Dissertations
Agricultural subsurface drainage is a water management practice used to remove excess water in poorly drained soil. The use of fertilizers combined with subsurface drainage practice affects negatively surface water quality due to nutrient loss. Woodchip bioreactors have previously been used as a technology for removing nitrate from agricultural subsurface drainage. Understanding the mechanism that governs nitrate removal in woodchip bioreactors is crucial for field bioreactor design and application. The objective of this project is to determine woodchip bioreactor denitrification kinetics parameters under different operating conditions including hydraulic retention time, temperature and influent nitrate concentrations. Laboratory column experiments were conducted …
Reuse Of Aqueous Waste Streams For Transportation-Related Applications, Gregory L. Hansen
Reuse Of Aqueous Waste Streams For Transportation-Related Applications, Gregory L. Hansen
Electronic Theses and Dissertations
Aqueous waste streams produced from commercial, industrial, and municipal processes may be potentially reused for transportation applications. The objectives of this project were to identify potential transportation-related applications for aqueous waste streams available in South Dakota, develop guidance for the beneficial reuse of aqueous waste streams, and evaluate the reuse of MIEX® brine generated by the Watertown Municipal Water Treatment Plant (WMWTP). This study identified many aqueous wastes from municipal water and wastewater treatment facilities, industrial and agricultural processes in South Dakota that can be potentially used for ice and dust control. Beneficial reuse of these waste streams requires a …
Precast Full-Depth Deck Panels Supported On Inverted Bulb-Tee Bridge Girders, Michael James Mingo
Precast Full-Depth Deck Panels Supported On Inverted Bulb-Tee Bridge Girders, Michael James Mingo
Electronic Theses and Dissertations
The South Dakota Department of Transportation (SDDOT) currently uses precast double-tee bridge deck systems for many of its county bridges because they are economical and fast in construction. Current bridges are designed for a service life of 75 years. However, many double-tee girder bridges are deteriorating and some need total replacement after 40 years in service. Furthermore, the double-tee bridge system only has one supplier in South Dakota. Alternative durable precast or prefabricated bridge systems are needed to provide more options to local governments when designing a new bridge. Different alternatives will also give local governments more flexibility to select …
Effects Of Temperature, Water Hardness, And Recirculation On Copper Corrosion, Brian R. Weiss
Effects Of Temperature, Water Hardness, And Recirculation On Copper Corrosion, Brian R. Weiss
Electronic Theses and Dissertations
In previous work, the effects of water quality have been shown to influence the formation of scale from copper corrosion. A general understanding of the effects of water quality on copper corrosion have been difficult to obtain because of complex interactions of water quality variables on copper corrosion in different water supply systems. The objective of this study was to examine the effects of temperature and water hardness on copper corrosion occurring in a household water supply system. The effects of recirculation were also studied in concurrence with the above water quality parameters. Electrochemical corrosion testing and corrosion by -product …
Probable Causes Of Cracking In A Series Of Reinforced Concrete Box Girder Bridges, Steven Milton Bjordahl
Probable Causes Of Cracking In A Series Of Reinforced Concrete Box Girder Bridges, Steven Milton Bjordahl
Electronic Theses and Dissertations
This thesis is the result of a study undertaken at the request of the South Dakota Department of Transportation (SDDOT) to determine the probable cause of a specific type of cracking that was observed in a series of reinforced concrete box girder bridges. The cracking consists of horizontal cracks through the end diaphragms of the girder and horizontal cracking over the interior bents. Typical crack patterns obtained from information supplied by the SDDOT are shown in Figure 1.
Ozonation Of A Municipal Groundwater Supply To Reduce Iron, Manganese, And Trihalomethane Formation, Richard Alan Stoebner
Ozonation Of A Municipal Groundwater Supply To Reduce Iron, Manganese, And Trihalomethane Formation, Richard Alan Stoebner
Electronic Theses and Dissertations
The purpose of this investigation was to determine the feasibility of using ozonation followed by filtration for removal of iron and manganese and prevention of trihalomethane formation. To avoid disruption of the treatment plant operation, pilot-scale units were used in the investigation. The filter media and filtering rates employed during the pilot studies were identical to those used at the East Water Treatment Plant.
Bearing Capacity Of Eccentrically Loaded Surface Footings On A Sand Layer Resting On A Rough Rigid Base, Roland Dale Maynard
Bearing Capacity Of Eccentrically Loaded Surface Footings On A Sand Layer Resting On A Rough Rigid Base, Roland Dale Maynard
Electronic Theses and Dissertations
The purpose of this investigation is to present the results of some recent laboratory model testing of the ultimate load carrying capacity of eccentrically loaded strip, surface footings on sand, with a rigid base located at varying depths. It is expected that these results will. lend to a better quantatative [sic] understanding of the problems encountered in these situations.