Digital Commons Network^™

Double Vault Composting Latrines In Rural Paraguay : Feasible Construction And Optimal Use, Paul T. Pebler

Dissertations, Master's Theses and Master's Reports - Open

Water resource depletion and sanitation are growing problems around the world. A solution to both of these problems is the use of composting latrines, as it requires no water and has been recommended by the World Health Organization as an improved sanitation technology. However, little analysis has been done on the decomposition process occurring inside the latrine, including what temperatures are reached and what variables most affect the composting process. Having better knowledge of how outside variables affect composting latrines can aid development workers on the choice of implementing such technology, and to better educate the users on the appropriate …

Timetable Management Technique In Railway Capacity Analysis: Development Of The Hybrid Optimization Of Train Schedules (Hots) Model, Hamed Pouryousef

Dissertations, Master's Theses and Master's Reports - Open

There are two general approaches to improve the capacity in a rail corridor, either by applying new capital infrastructure investment or by improving the operation of the rail services. Techniques to evaluate the railway operation include modeling and optimization through the use of commercial timetable management and rail simulation tools. However, only a few of the existing tools include complete features of timetable management techniques (e.g. timetable compression) are equipped with an optimization model for rescheduling and timetable improvement and this is especially true when it comes to the U.S. rail environment that prevalently uses unstructured operation practices.

This dissertation …

Stabilization Of Iron Mine Tailings Through Microbially Induced Calcite Precipitation, Noah D. Buikema

Dissertations, Master's Theses and Master's Reports - Open

Mine tailings are deposited into large-scale impoundments. Seasonal temperature fluctuations destabilize particles on the impoundment surface. Wind-induced shear stresses on the destabilized particles can in turn result in suspension of micron-sized particles into the atmosphere, creating dust storms that pose hazards to humans and the environment. Thus, efficient and sustainable methods of dust abatement are needed. One novel method for controlling dust emissions is biomodification. For example, Sporosarcina pasteurii can promote biocalcification in soil via ureolysis. However, application of this method to fined grained materials, such as mine tailings, is challenging. The goal of this work was to perform a …

Performance-Based Engineering For Evaluation And Retrofitting Non-Ductile Reinforced Concrete Buildings Incorporating Aftershock Hazard, Ruilong Han

Dissertations, Master's Theses and Master's Reports - Open

Performance-based engineering (PBE) provides a probabilistic tool for assessing the seismic risk and performance of buildings. Only the mainshock hazard has been included in the current PBE framework, although the concern on aftershock hazard has been increased recently. This study develops methodologies to incorporate aftershock hazard into a PBE framework, and assesses the seismic risk and performance of non-ductile reinforced concrete (RC) frame buildings under mainshock and aftershock hazards. A seismic retrofit strategy for these buildings, base isolation, is also evaluated using the developed methodologies.

A methodology for synthesizing aftershock ground motions is proposed and validated to resolve the challenge …

A Field Investigation Of Composite Mud Brick Compressive Strength, Kevin D. Hale

Dissertations, Master's Theses and Master's Reports - Open

It has been highlighted in numerous publications that in the field of earth construction there is a strong disconnect between experimental work in the laboratory and its application in the field. The current study attempts to help bridge this gap with a field test conducted in Nampula, Mozambique. Mud bricks were made with a simple hand mold and reinforced with bamboo and straw fibers. Fibers were cut into lengths of 3 cm and 6 cm while being mixed in fractions of 0.125%, 0.25% and 0.50% by weight and compressive strength was measured using an application of the 3-point bending test. …

Development Of A Fundamental Rating System For Identifying Sprawl: A Case Study Utilizing Small Cities In Michigan, Jonathan T. Riehl

Dissertations, Master's Theses and Master's Reports - Open

Urban sprawl research generally fits into one or more of four realms including definitions, causes, components, and consequences. Although research on consequences continues to thrive, research on components is in its adolescence, primarily due a lack of consensus on definition. Recent studies such as Ewing et al. 2014 have narrowed the list of sprawl metrics to about 20 within four factors including development density, land use mix, activity centering, and street accessibility.

This main product of this research is a Sprawl Scorecard for small Michigan cities varying in size from Traverse City, nearly 50,000 people in the urban cluster, down …

Stability Analysis Of The Slope Along Us-2 Between Epoufette Bay And The Cut River Bridge, Stephanie Watts-Garcia

Dissertations, Master's Theses and Master's Reports - Open

Recently, water was observed flowing from a section of steep slope along US-2 near St. Ignace, Michigan in addition to soil sloughing in the area where the water is flowing from the slope. An inspection of the area also showed the presence of sinkholes. The original construction drawing for US-2 also indicated that sinkholes were present in this area prior to road construction in 1948. An investigation was conducted to determine the overall stability of the slope. The slope consists primarily of aeolian sand deposits. Laboratory testing determined the shear strength of the slope material to have a friction angle …

Age-Dependent Fragility And Life-Cycle Cost Analysis Of Timber And Steel Distribution Poles Subjected To Hurricanes, Abdullahi M. Salman

Dissertations, Master's Theses and Master's Reports - Open

Power distribution systems are susceptible to extreme damage from natural hazards especially hurricanes. Hurricane winds can knock down distribution poles thereby causing damage to the system and power outages which can result in millions of dollars in lost revenue and restoration costs. Timber has been the dominant material used to support overhead lines in distribution systems. Recently however, utility companies have been searching for a cost-effective alternative to timber poles due to environmental concerns, durability, high cost of maintenance and need for improved aesthetics. Steel has emerged as a viable alternative to timber due to its advantages such as relatively …

State-And-Transition Modeling And Adaptive Management: Tools For Future Co-Development Of Madagascar’S Natural Resources And People, Patrick Thomas Spencer

Dissertations, Master's Theses and Master's Reports - Open

Madagascar’s terrestrial and aquatic ecosystems have long supported a unique set of ecological communities, many of whom are endemic to the tropical island. Those same ecosystems have been a source of valuable natural resources to some of the poorest people in the world. Nevertheless, with pride, ingenuity and resourcefulness, the Malagasy people of the southwest coast, being of Vezo identity, subsist with low development fishing techniques aimed at an increasingly threatened host of aquatic seascapes. Mangroves, sea grass bed, and coral reefs of the region are under increased pressure from the general populace for both food provisions and support of …

Beneficial Reuse Of Locally-Available Waste Materials As Lightweight Aggregate In Lightweight Concrete, Brienna E. Rust

Dissertations, Master's Theses and Master's Reports - Open

This study investigated the physical characteristics of lightweight concrete produced using waste materials as coarse aggregate. The study was inspired by the author’s Peace Corps service in Kilwa, Tanzania. Coconut shell, sisal fiber, and PET plastic were chosen as the test waste products due to their abundance in the area. Two mixes were produced for each waste product and the mix proportions designed for resulting compressive strengths of 3000 and 5000 psi. The proportions were selected based on guidelines for lightweight concrete from the American Concrete Institute. In preparation for mixing, coconut shells were crushed into aggregate no larger than …

Evaluation Of Potential Transload Facility Locations In The Upper Peninsula (Up) Of Michigan, Irfan Rasul

Dissertations, Master's Theses and Master's Reports - Open

Shippers want to improve their transportation efficiency and rail transportation has the potential to provide an economical alternative to trucking, but it also has potential drawbacks. The pressure to optimize transportation supply chain logistics has resulted in growing interest in multimodal alternatives, such as a combination of truck and rail transportation, but the comparison of multimodal and modal alternatives can be complicated.

Shippers in Michigan’s Upper Peninsula (UP) face similar challenges. Adding to the challenge is the distance from major markets and the absence of available facilities for transloading activities. This study reviewed three potential locations for a transload facility …

A Study Of A Landslide In Birmingham, Alabama, Caitlin L. Bukovitz

Dissertations, Master's Theses and Master's Reports - Open

In 1988 a landslide occurred at a construction site in Birmingham, Alabama in which a portion of the construction site required excavating a rock slope with a group of apartments that were located at the top of the slope. During construction, two separate landslides occurred causing one and half of the apartment buildings to collapse downslope. The slope failure was investigated by two firms. One firm investigated the site conditions and the second firm investigated the design of the cut slope. The main concerns in the investigation were (1) the lack of consideration for the existing joint system, (2) using …

Model Updating And Structural Health Monitoring Of Horizontal Axis Wind Turbines Via Advanced Spinning Finite Elements And Stochastic Subspace Identification Methods, Antonio Velazquez Hernandez

Dissertations, Master's Theses and Master's Reports - Open

Wind energy has been one of the most growing sectors of the nation’s renewable energy portfolio for the past decade, and the same tendency is being projected for the upcoming years given the aggressive governmental policies for the reduction of fossil fuel dependency. Great technological expectation and outstanding commercial penetration has shown the so called Horizontal Axis Wind Turbines (HAWT) technologies. Given its great acceptance, size evolution of wind turbines over time has increased exponentially. However, safety and economical concerns have emerged as a result of the newly design tendencies for massive scale wind turbine structures presenting high slenderness ratios …

Assessment Of Seismic Damage Of Buildings And Related Environmental Impacts, Carley A. Feese

Dissertations, Master's Theses and Master's Reports - Open

Sustainable development has only recently started examining the existing infrastructure, and a key aspect of this is hazard mitigation. To examine buildings under a sustainable perspective requires an understanding of a building's life-cycle environmental costs, including the consideration of associated environmental impacts induced by earthquake damage. Damage repair costs lead to additional material and energy consumption, leading to harmful environmental impacts. Merging results obtained from a seismic evaluation and life-cycle analysis for buildings will give a novel outlook on sustainable design decisions. To evaluate the environmental impacts caused by buildings, long-term impacts accrued throughout a building's lifetime and impacts associated …

A Study Of The Impacts Of Freeze-Thaw On Cliff Recession At The Calvert Cliffs In Calvert County, Maryland, Bonnie Elizabeth Zwissler

Dissertations, Master's Theses and Master's Reports - Open

The Calvert Cliffs, which form much of the western coastline of the Chesapeake Bay in Calvert County, Maryland, are actively eroding and destabilizing, resulting in a critical situation for many homes in close proximity to the slope's crest. Past studies have identified that where waves directly interact with the toe of the slope, wave action controls cliff recession; however, where waves do not regularly interact with the slope toe, the past work identified that freeze-thaw controls recession. This study investigated the validity of this second claim by analyzing the recession rate and freeze-thaw behavior of six study sites along the …

An Investigation Of Waste Glass-Based Geopolymers Supplemented With Alumina, Mary U. Christiansen

Dissertations, Master's Theses and Master's Reports - Open

An increased consideration of sustainability throughout society has resulted in a surge of research investigating sustainable alternatives to existing construction materials. A new binder system, called a geopolymer, is being investigated to supplement ordinary portland cement (OPC) concrete, which has come under scrutiny because of the CO2 emissions inherent in its production.

Geopolymers are produced from the alkali activation of a powdered aluminosilicate source by an alkaline solution, which results in a dense three-dimensional matrix of tetrahedrally linked aluminosilicates. Geopolymers have shown great potential as a building construction material, offering similar mechanical and durability properties to OPC. Additionally, geopolymers have …

Performance-Based Engineering Framework For Earthquake And Fire Following Earthquake, Aerik Carlton

Dissertations, Master's Theses and Master's Reports - Open

The objective for this thesis is to outline a Performance-Based Engineering (PBE) framework to address the multiple hazards of Earthquake (EQ) and subsequent Fire Following Earthquake (FFE). Currently, fire codes for the United States are largely empirical and prescriptive in nature. The reliance on prescriptive requirements makes quantifying sustained damage due to fire difficult. Additionally, the empirical standards have resulted from individual member or individual assembly furnace testing, which have been shown to differ greatly from full structural system behavior. The very nature of fire behavior (ignition, growth, suppression, and spread) is fundamentally difficult to quantify due to the inherent …

The Laboratory Evaluation Of Bio Oil Derived From Waste Resources As Extender For Asphalt Binder, Xu Yang

Dissertations, Master's Theses and Master's Reports - Open

A shortage of petroleum asphalt is creating opportunities for engineers to utilize alternative pavement materials. Three types of bio oils, original bio oil (OB), dewatered bio oil (DWB) and polymer-modified bio oil (PMB) were used to modify and partially replace petroleum asphalt in this research. The research investigated the procedure of producing bio oil, the rheological properties of asphalt binders modified and partially replaced by bio oil, and the mechanical performances of asphalt mixtures modified by bio oil. The analysis of variance (ANOVA) is conducted on the test results for the significance analysis. The main finding of the study includes: …

Stilling Basin Scour Remediation Using Air Injection And Flat Plate Extension, Rachael Barlock

Dissertations, Master's Theses and Master's Reports - Open

The South Florida Water Management District (SFWMD) is responsible for managing over 2500 miles of waterways and hundreds of water control structures. Many of these control structures are experiencing erosion, known as scour, of the sediment downstream of the structure. Laboratory experiments were conducted in order to investigate the effectiveness of two-dimensional air diffusers and plate extensions (without air injection) on a 1/30 scale model of one of SFWMD gated spillway structures, the S65E gated spillway. A literature review examining the results of similar studies was conducted. The experimental design for this research was based off of previous work done …

Structural Control Of A Small-Scale Test-Bed Shaker Structure Using A Sponge-Type Magneto-Rheological Fluid Damper, Benjamin D. Winter

Dissertations, Master's Theses and Master's Reports - Open

Semi-active damping devices have been shown to be effective in mitigating unwanted vibrations in civil structures. These devices impart force indirectly through real-time alterations to structural properties. Simulating the complex behavior of these devices for laboratory-scale experiments is a major challenge. Commercial devices for seismic applications typically operate in the 2-10 kN range; this force is too high for small-scale testing applications where requirements typically range from 0-10 N. Several challenges must be overcome to produce damping forces at this level. In this study, a small-scale magneto-rheological (MR) damper utilizing a fluid absorbent metal foam matrix is developed and tested …

Determing The Effect Of Thermal Treatment Timing On Ultra-High Performance Concrete Beams, Christopher H. Mullen

Dissertations, Master's Theses and Master's Reports - Open

The loss of prestressing force over time influences the long-term deflection of the prestressed concrete element. Prestress losses are inherently complex due to the interaction of concrete creep, concrete shrinkage, and steel relaxation. Implementing advanced materials such as ultra-high performance concrete (UHPC) further complicates the estimation of prestress losses because of the changes in material models dependent on curing regime.

Past research shows compressive creep is "locked in" when UHPC cylinders are subjected to thermal treatment before being loaded in compression. However, the current precasting manufacturing process would typically load the element (through prestressing strand release from the prestressing bed) …

Evaluation Of Intelligent Compaction Control In The M-189 Reconstruction Project At Iron River, Michigan, Junhong Li

Dissertations, Master's Theses and Master's Reports - Open

This research evaluated an Intelligent Compaction (IC) unit on the M-189 highway reconstruction project at Iron River, Michigan. The results from the IC unit were compared to several traditional compaction measurement devices including Nuclear Density Gauge (NDG), Geogauge, Light Weight Deflectometer (LWD), Dynamic Cone Penetrometer (DCP), and Modified Clegg Hammer (MCH). The research collected point measurements data on a test section in which 30 test locations on the final Class II sand base layer and the 22A gravel layer. These point measurements were compared with the IC measurements (ICMVs) on a point-to-point basis through a linear regression analysis. Poor correlations …

Preliminary Investigation Of Ultra-High Performance Concrete Behavior At High Strain Rates Using The Split-Hopkinson Pressure Bar, Jacob Clark

Dissertations, Master's Theses and Master's Reports - Open

Ultra-high performance concrete (UHPC) displays several enhanced material properties compared to normal strength concrete (NSC). In past research, Split-Hopkinson pressure bar (SHPB) tests have been used for normal strength concrete to determine material behavior at high strain rates. The behavior of advanced concrete materials, such as UHPC, under high strain rates has not been thoroughly investigated. While it is generally accepted that concrete materials experience increases in compressive strength under increasing strain rates, a preliminary investigation was conducted to gain insight into the compressive behavior of UHPC under high strain rate SHPB testing.

In this research, 50 specimens were tested …

Sampling Bias In Evaluating The Probability Of Seismically Induced Soil Liquefaction With Spt & Cpt Case Histories, Abhishek Jain

Dissertations, Master's Theses and Master's Reports - Open

Several deterministic and probabilistic methods are used to evaluate the probability of seismically induced liquefaction of a soil. The probabilistic models usually possess some uncertainty in that model and uncertainties in the parameters used to develop that model. These model uncertainties vary from one statistical model to another. Most of the model uncertainties are epistemic, and can be addressed through appropriate knowledge of the statistical model. One such epistemic model uncertainty in evaluating liquefaction potential using a probabilistic model such as logistic regression is sampling bias. Sampling bias is the difference between the class distribution in the sample used for …

The Performance And Modification Of Recycled Electronic Waste Plastics For The Improvement Of Asphalt Pavement Materials, Baron W. Colbert

Dissertations, Master's Theses and Master's Reports - Open

Bulk electric waste plastics were recycled and reduced in size into plastic chips before pulverization or cryogenic grinding into powders. Two major types of electronic waste plastics were used in this investigation: acrylonitrile butadiene styrene (ABS) and high impact polystyrene (HIPS). This research investigation utilized two approaches for incorporating electronic waste plastics into asphalt pavement materials. The first approach was blending and integrating recycled and processed electronic waste powders directly into asphalt mixtures and binders; and the second approach was to chemically treat recycled and processed electronic waste powders with hydro-peroxide before blending into asphalt mixtures and binders. The chemical …

The Quantification Of The Fly Ash Adsorption Capacity For The Purpose Of Characterization And Use In Concrete, Zeyad Tareq Ahmed

Dissertations, Master's Theses and Master's Reports - Open

Fly ash has been shown to be an effective replacement for portland cement in concrete mixtures. However, many fly ash materials contain unburned carbon from the combustion process. Unburned carbon in fly ash adsorbs air entraining admixtures (AEAs) reducing their effectiveness in providing a specified air void system in concrete materials. Measurement tools and methods for characterization of the adsorption properties of fly ash materials are necessary for beneficial use of fly ash materials in concrete. In this research, two methods were developed to measure and quantify the adsorption capacity AEAs on fly ash materials. The first method is the …

Regulation Issues And Prediction Of Natural Estrogen Loads For Wastewater Treatment Plants, Michelle E. Jarvie

Dissertations, Master's Theses and Master's Reports - Open

No abstract provided.

Countermeasures Against Scour At Bridge Abutments, Hua Li

Dissertations, Master's Theses and Master's Reports - Open

Scour at bridge abutments can cause damage or failure of bridges and result in excessive repairs, loss of accessibility, or even death. To mitigate abutment scour, both clear-water and live-bed laboratory experiments in a compound channel were performed using parallel walls and spur dikes as countermeasures, respectively. In addition, collars were tested under clear-water conditions only. It was found that both parallel walls and spur dikes can efficiently protect the abutment from scour provided that they are properly designed. Design guidelines were discussed for both countermeasures. Preliminary clear-water tests of collars as countermeasures against scour showed some promising results although …

Optimal Design Of Pump And Treat Remediation Systems : Treatment Modeling, Source Modeling And Time As A Decision Variable, Karen L. Endres

Dissertations, Master's Theses and Master's Reports - Open

Groundwater optimization and simulation is a maturing science. Research work contained in this thesis extends into areas that have not been fully explored. The incorporation of source and treatment systems selection and design produces information to help decision makers. Further insight is gained by evaluating some of the requirements and standards enforced by regulations such as, remediation time.

The technical aspects of a remediation system are set by the physical properties and the regulatory constraints enforced. As an example, the addition of a realistic treatment system gives more accurate cost estimates, but the pump and treat (PAT) systems parameters do …

Selected Chemoautotrophic Processes In Wastewater Treatment: Low Temperature Nitrification Inhibition By An Azo Dye And Biofiltration For Odor Control Of Hydrogen Sulfide, Ronald W. Martin Jr.

Dissertations, Master's Theses and Master's Reports - Open

Biochemical processes by chemoautotrophs such as nitrifiers and sulfide and iron oxidizers are used extensively in wastewater treatment. The research described in this dissertation involved the study of two selected biological processes utilized in wastewater treatment mediated by chemoautotrophic bacteria: nitrification (biological removal of ammonia and nitrogen) and hydrogen sulfide (H2S) removal from odorous air using biofiltration.

A municipal wastewater treatment plant (WWTP) receiving industrial dyeing discharge containing the azo dye, acid black 1 (AB1) failed to meet discharge limits, especially during the winter. Dyeing discharge mixed with domestic sewage was fed to sequencing batch reactors at 22oC and 7oC. …