Digital Commons Network^™

Engineering-Enhanced Theatre: How Engineering Involvement Can Aid Regional Theatres, Albert M. Le

Architectural Engineering

Engineering and theatre are disciplines not often associated with each other within regional and small theatre companies in the United States. The distinction between the two fields of study is not simply from the fundamental differences between how each field is taught and practiced, but also the difficulties encountered within a scope of theatre often constrained with limited budget and time for each production. However, when beginning to explore the intersection between engineering and theatre, it is found that the empirical nature of current theatrical practices can be countered, and scenic design and construction can be re-envisioned with engineering involvement …

Timber Buckling Restrained Brace, Finn K. Burke

Architectural Engineering

Buckling Restrained Brace Frames (BRBs) are a lateral force resisting system providing near equal compressive and tensile capacities through the mitigation of compression buckling. BRBs have traditionally existed in the steel building market, with limited use in wood construction. The proposal of a Timber Bucking Restrained Brace Frame (TBRB) presents a BRB option for the low-rise and mid-rise wood framed market, using readily available materials within the low/mid-rise construction cost bracket. Five previous TBRB iterations have been built and tested, with results showing promising results for further TBRB development and exploration. The sixth and current iteration of the TBRB builds …

The Wall Group, Richard Antablin, Sara Engmyr, Michelle Griffith, Jora Leigh, Jesse Rainsdon

Architectural Engineering

This project aimed to design and construct an art wall in Poly Canyon to deter graffiti on existing structures and provide a designated area for student expression. However, after prolonged iterative revisions, it became evident that the project was significantly behind the original timeline.

It was recommended that the wall proposal be submitted for future student implementation. Instead of constructing the wall, an alternative course of action was proposed: restoring an existing structure in Poly Canyon to provide the desired hands-on experience.

After careful consideration, the Techite Bridge was selected for restoration. The proposed plan involves thorough cleaning, repairing chipped …

Chioma Di Ulivo - Courtyard Canopy, Lilla J. Vigh, Claudia A. Geist

Architectural Engineering

Chioma di Ulivo ("Olive Tree Canopy") is the investigation and design of a canopy structure in the Engineering West (Bldg. 21) Hasslein Courtyard. The canopy will serve as a filtration system for both water and fallen olives from the olive tree on site, while providing a functional collaboration space for faculty and students alike. The goal of this project was to construct a quality diorama built by Lilla Vigh and Claudia Geist under the supervision of Dr. Craig Baltimore.

Polypropylene As Partial Fine Aggregate Substitute In Concrete, Samuel E. Royston, Chrisitan G. Achkar, Nicholas B. Tabarez

Architectural Engineering

The objective of this project is to discover a structurally effective method in repurposing recyclable plastic waste through its partial substitution for traditional fine aggregate in concrete.

Results obtained from analysis indicate a 25 percent compressive strength reduction with polypropylene at a 10 percent partial substitution for total sand content. This material successfully performed as an alternative, presenting a ductile mode of failure.

Three material alternatives - polypropylene, polyethylene, and rubber - were substituted for a percentage of sand. These materials underwent concrete cylinder crushing tests to determine their ultimate crushing strength, with the intent of identifying the most effective …

Smith Property Pre-Engineered Metal Barn, Trent Arjay Olmstead

Architectural Engineering

The Smith Residence Barn is a pre-engineered metal building designed to provide additional storage and workspace. The Architectural design was created by the Nunno Corporation, a San Luis Obispo based steel building general contractor. The soils report was created by Mid-Coast Geotechnical, INC. and the report’s conclusions were used for determining site conditions related to the foundation and lateral force system design. The structural calculations and plans were created by Trent Olmstead and reviewed by Brian Marc-Aurele, SE and Chris Murphy, SE. All calculations were done in accordance with the 2022 CBC, ASCE 7-16, 2023 AISC, ACI 318-19, and AISI …

Revitalizing Historic Plazas For Integrated Urban Conservation, Mona Helmy

Architectural Engineering

Historic plazas play a major role in improving or creating place identity, place memory, and belonging of heritage areas. They maintain elements of tangible and intangible heritage, such as accommodating social networks, traditions, lifestyles, traditional crafts, festivals, or rituals. Above all, they manifest a unique sense of place, and collective memory of cities to local communities, contributing to the historical character of heritage areas. The paper claims that the revitalization of historic plazas intends to reconcile conserving their historical urban landscape (HUL) to meet the changing requirements of local communities. It argues that revitalizing historical plazas is an innovative approach …

Mechanism Of Seismic Liquefaction For Heterogeneous Soil, Radu Popescu, Pradipta Chakrabortty

Architectural Engineering

In addition to inducing uncertainty in the predicted response, natural spatial variability of soil properties affects the mechanical response of geotechnical structures. When a failure surface is involved in the response, this surface can deviate from its theoretical location to pass through weaker zones of material. For the case of seismically induced soil liquefaction, it has been found that a larger amount of excess pore water pressure is generated in a soil exhibiting small-scale variability of its properties than in the corresponding uniform soil having geomechanical properties equal to the average properties of the heterogeneous soil. An explanation for this …

Humanising Commercial Streets As A Tool For Social Sustainability, Mona Helmy, Nada El-Hama

Architectural Engineering

Commercial Streets are the beating heart of any city, the hubs of leisure, business, and social gatherings, in which they also reflect cultures and be used to assess the level of well-being of citizens. Recently, due to the world population increase and other various factors, such as excessive urbanism and the domination of vehicle movement over pedestrianization rights, some commercial streets suffer from dehumanisation causes and symptoms. Those vary between substandard planning and construction, inhospitable landscaping, and excessive visual pollution, among other causes and symptoms. Thus, this research investigates various Humanisation strategies adopted worldwide. It discusses the potential of applying …

Effect Of A Geothermal Heat Pump System On Cooling Residential Buildings In A Hot, Dry Climate, Rania Rushdy Moussa, Ayman H. Mahmoud

Architectural Engineering

ABSTRACT In the last century, electricity demand has doubled due to urban expansion, which has contributed to the formation of more urban heat islands (UHI) and the appearance of environmental hazards such as the global climate change phenomenon. Since residential buildings are considered the main electricity consumer sector in Egypt, they consume up to 42% of total energy consumption, which contributes to increasing temperatures and constitutes UHI in cities. In this context, the research aims to examine the effectiveness of using the closed vertical loop geothermal system (GSHPCV) for cooling residential buildings in a hot, dry climate, such as Cairo, …

Python Manual: A Learning Guide For Structural Engineering Students, Aaron Dewey, Kennedy Gomez, Meileen Yee

Architectural Engineering

This Python programming manual is a resource to assist architectural, civil, or structural engineering students as they learn to create scripts to solve various structural analysis and dynamics problems. Beyond providing guidance on Python libraries that enable numerical and symbolic mathematics (NumPy, SciPy, SymPy), the manual also focuses on the creation of tabular and plot outputs useful to communicate results through technical reports (Pandas, Matplotlib).

The content of this document was developed based on detailed review of curriculum for three architectural engineering computing courses typically offered to upper class students at Cal Poly, San Luis Obispo as well as surveys …

Evaluation Of Structural Retrofit Of A Hillside Home, Cameron C. R. Cunningham

Architectural Engineering

On November 24, 2021 after months of initial planning, the project owner received approval from the San Luis Obispo Planning and Building Department for initial work on a residential remodeling submission. This approval including a grading permit and other initial site work to begin renovation of the owner’s hillside residential property.

Teaching The Equivalent Rectangular Stress Block, Anahid Behrouzi, J. Chris Carroll, Ben Dymond

Architectural Engineering

The equivalent rectangular stress block is the basis for determining the flexural strength of reinforced concrete members. Instructors commonly present the concept in two dimensions, contrary to its three-dimensional nature. Unfortunately, this can be particularly difficult for students to understand and visualize, especially for students with visual learning style preferences. This paper presents an overview of the equivalent rectangular stress block, select active learning methods, and four specific examples used by the authors to introduce the equivalent rectangular stress block in an undergraduate reinforced concrete design course. The first method focuses on understanding the terms associated with the equivalent rectangular …

Active And Visual Methods For Teaching Nonrectangular Reinforced Concrete Beams, Anahid Behrouzi, J.Chris Carroll, Karl F. Meyer

Architectural Engineering

Nonrectangular cross sections are a common occurrence in reinforced concrete design typically taking the form of flanged beam sections, circular columns, and square or rectangular columns subject to biaxial bending. Instructors typically introduce the theory behind nonrectangular beams using two-dimensional sketches of flanged sections. Students can struggle to visualize the examples when presented in two dimensions; deciphering the multiple resultant compressive forces and their corresponding moment arms are particularly difficult. This paper presents an overview of nonrectangular beam theory and select active learning methods along with three specific examples used by the authors to teach nonrectangular beams in an undergraduate …

Optimizing Phase Change Material On Opaque Building Envelope To Reach Nzeb, Mennatallah Hassan, Khaled Ragheb Dewidar, Mostafa Ismail Rifat, Ashraf Nessim, Aly Assem Abdelalim

Architectural Engineering

Designing a net Zero Energy Building nZEB envelope with high thermal comfort and low energy consumption is vital nowadays. There is some established specialized software for building optimization design, but these programs are time-consuming, expensive, and demand many data input of building parameters. Therefore, it is difficult to follow the optimization procedure. The aim of this research is to present a novel study to optimize the use of Phase Change Material PCM on opaque building envelope using a multi-objective optimization tool. Python (3) is employed to implement EnergyPlus to minimize the initial cost of PCM in commercial buildings, running cost …

Wood Diaphragm Deflections. Part I: Generalizing Standard Equations Using Mechanicsbased Derivations For Panel Construction, John W. Lawson, Scott Breneman, Marco Lo Ricco

Architectural Engineering

Horizontal wood diaphragm systems, whether decked with conventional or mass timber panels, transfer wind and seismic loads to vertical elements of the lateral force-resisting system (LFRS), in flexible, rigid, or semi-rigid fashion. Characterizing and calculating the resulting diaphragm deflections determines the distribution of forces to critically loaded components and a significant portion of lateral building translations and rotations. Deflection equations for sheathed wood structural panel (WSP) diaphragms are well established in U.S. design standards in a 4-term expression that models flexural, shear, and fastener-slip deformations and its full derivation using principles of mechanics is provided herein. Derivations of similar equations …

Wood Diaphragm Deflections. Part Ii: Implementing A Unified Approach For Current Clt And Wsp Practice, John Lawson

Architectural Engineering

Horizontal wood diaphragm systems, whether decked with conventional or mass timber panels, transfer wind and seismic loads to vertical elements of the lateral force-resisting system (LFRS), in flexible, rigid, or semi-rigid fashion. Characterizing and calculating the resulting diaphragm deflections determines the distribution of forces to critically loaded components and a significant portion of lateral building translations and rotations. Deflection equations for sheathed wood structural panel (WSP) diaphragms are well established in U.S. design standards in a 4-term expression that models flexural, shear, and fastener-slip deformations, but similar equations for cross-laminated timber (CLT) diaphragms have yet to unfold, despite growing industry …

The Effect Of Using Data Palm Waste Fibers In Plain Concrete Mixture By Comparing Three Pre‐Treatment Techniques, Dina Rushdy M. Moawad, Rania Rushdy Moussa

Architectural Engineering

The high rates of industrial and agricultural wastes and byproduct production produced several environmental concerns in addition to increasing the risks of contaminating natural resources. The amount of organic waste has been rising over the past few decades, but it has been poorly managed, especially in smaller countries where it is either burned, improperly disposed, or thrown in landfills. Moreover, the production of concrete generates a large amount of waste that has a negative impact on our planet even though it is an extremely significant building material. The potential of developing another plain concrete mixture sample with date palm mesh …

The Impact Of Biophilic Attributes On University Students Level Of Satisfaction: Using Virtual Reality Simulation, Amira Mohamed Mahrous, Khaled Dewidar, Mostafa Refaat, Ashraf Nessim

Architectural Engineering

Biophilic design is a new approach that can enhance human psychological well-being. Most recent studies focus on applying biophilic design to hospitals or office buildings, not academic buildings. While usually ignored, students' level of satisfaction is one of the most important key indicators for a successful learning environment. This paper aims to identify the biophilic design attributes that can potentially contribute to enhancing the students' level of satisfaction. This will be done through an experimental research design using virtual reality in a design studio at The British University in Egypt. Each participant (N = 52) was exposed to the existing …

Physical And Digital Models For Timber Design And Analysis Courses, Paulina Robles, Gabrielle Rose Favro, Anahid Behrouzi, Abby Lentz

Architectural Engineering

Among structural engineering education research, there is a limited number of studies on interactive learning tools and activities specifically for the timber design classroom to assist students in visualizing material behavior, vertical and lateral load paths, and construction sequence. Timber design courses within the undergraduate program in the Architectural Engineering department at California Polytechnic State University in San Luis Obispo (Cal Poly), place an emphasis on seismic and wind design. Therefore, the proposed learning tools and activities are intended to pair with an introduction to concepts in the American Wood Council’s National Design Specifications (NDS) and Special Design Provisions for …

Arce 415 Portfolio: The Green Bird Of Paradise, Kristofer R. Rickansrud, Ryan Chan, Brendan Peers, Joel Santoyo

Architectural Engineering

A design project creating a Polyshell sunshade structure for the Leaning Pine Arboretum.

Mbesese Build 2023, Ben Stewart, Matthew Chung, Ian Mcconnell

Architectural Engineering

In collaboration with the Mbesese Initiative for Sustainable Developments, the senior project group from California Polytechnic State University of San Luis Obispo, researched, designed, and created construction documents for the Same Polytechnic College project in the town of Same, Tanzania. This project aims to combat poverty in the Kilimanjaro Region of Tanzania by providing education and infrastructure development. In 2023, the senior project group focused on completing a communal and educational space and addressing clean water scarcity through a rainwater collection system on the site of the future college.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Polymöbi: Single-Surface Timber Polyshell Shade Structure, Ryan Khieu, Tom Sesin, Gabriel Garfias, Evan Brooks

Architectural Engineering

Overall design process of incorporating Polyshells into a sunshade structure, while addressing client needs, materiality, constructability, and life safety.

Crescent: Proposed Arboretum Shade Structure, Hayle Jones, Ian Kelly, Emilie Phuong, Brooke Heitman

Architectural Engineering

This is a sunshade structure that uses shells as the facade to create the enclosing of this structure.

The Leaf For Leaning Pine Arboretum, Maria Boyle, Shelby Holmquist, Andrew Duong

Architectural Engineering

The goal of this ARCE 415 senior project course was to create a shade structure that could be incorporated into The Leaning Pine Arboretum, located on campus at Cal Poly, San Luis Obispo. From start to finish, these three ARCE students took on the role of form-finders to form-testers to form-makers. We are putting the "architectural" back in architectural engineering as we reclaim the historical tradition of the engineer as the form finder. In many of our design labs we focused primarily on sizing members and analysis, just using a structure that the architect already had established. In this one-of-a-kind …

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

Concrete Masonry Program (Cmd21) Usability, Allie G. Decker

Architectural Engineering

The Concrete Masonry Design Program, CMD21, can be utilized in the design of beams, columns, and walls, but this project focuses on the use of the program to analyze shear walls loaded in-plane. This report critiques and describes the learning process behind the CMD21 program.

Optimization Of Plastic Waste Integration In Cement Bricks, Yara Salah El-Din El-Metwally

Architectural Engineering

Implementing plastic waste in construction materials is a sustainable disposal method to overcome plastic pollution. The current study aims to optimize the integration of plastic waste in cement bricks regarding their thermomechanical properties in order to develop an eco‑friendly building material. Polyethylene terephthalate (PET) and high‑density polyethylene (HDPE) partially substituted cement with different ratios (0, 2.5, 5, 7.5, 10, 20%). The type that achieved better thermomechanical performance further replaced the other brick components; sand and coarse aggregates to determine the optimum replacement scenario and best design mix. Laboratory experiments have been carried out to measure the compressive strength, indirect tensile …