Chemical Engineering Commons^™

The Artificial Leaf: An Investigation Into The Sociotechnical Integration Of New Solar Energy Innovations, Alexandra K. Treml, Jamie M. Mears

Senior Honors Projects, 2020-current

Increasing global demand, combined with the volatility of fossil fuels, has called for a large-scale increase in renewable energy production. Photovoltaics hold significant potential, but by nature, solar energy is intermittent and lacks dispatchability. Researchers around the world are working to create innovative solutions that utilize semiconductors found in solar cell technologies in new ways. This project harnesses photoelectrochemical water-splitting, which uses light energy to dissociate water molecules into hydrogen and oxygen. When the water-splitting device is submerged in saltwater and illuminated by sunlight, oxygen and hydrogen gas are produced on opposite surfaces, and can be either released or stored …

Characterizing Non-Linear Structural, Mechanical, And Volumetric Properties Of Aliphatic And Aromatic Thermosets, Brendan Robert Ondra

Doctoral Dissertations

A unifying theme throughout this dissertation employs advanced experimental mechanics, including the design and development of new instruments, testing techniques, and analysis strategies. Chapter 1 covers the design and development of a new instrument for polymer and composite characterization. More specifically, a bi-fluidic, confining-fluid, pressurizable dilatometer (referred to herein as the BFCF-PVT). Whereas both classical and contemporary confining-fluid type pressurizable dilatometers utilize a bellows and / or piston system along with a Linear Variable Displacement Transducer to apply pressure and track volume changes, the BFCF-PVT that was designed and built utilizes a fluid-fluid interface (composed of two immiscible fluids that …

Ultrasound-Assisted Post-Pyrolysis Magnetization Of Microporous Biochar For Effective Removal Of Heavy Metals, Ronish Shrestha

Honors Theses

Low cost and efficient adsorption of heavy metals from wastewater and thorough removal of adsorbent after water treatment have become the two essential needs for the commercial use of any adsorbent. Biochar (BC), the solid byproduct of pyrolysis with microporous carbonaceous structure, has been increasingly recognized as an efficient adsorbent for a vast number of pollutants. Magnetization, though eases the separation and reuse of BC, significantly reduces its adsorption capacity to a comparatively much higher extent. In this study, a hybrid post-pyrolysis magnetization was developed which sustained and even significantly increased the adsorption capacity of biochar. The process included i) …

Comparative Analysis Of The Results From The Ideal Gas Assumptions With More Rigorous Calculations From Pro/Ii Of The Production Of Pharmaceutical Grade Acetone, Soibifaa Frank-Briggs

Honors Theses

The Chemical engineering team was assigned by Landshark Inc to investigate the production of 30,000 tonnes/yr of pharmaceutical-grade acetone with a purity of 99.9 wt.% from the dehydrogenation of isopropanol (IPA). The team was tasked with determining the necessary process and unit operation criteria to ensure the economic feasibility of the proposed plant.

The major goal of this thesis is to provide a data comparison of the reactor in acetone production process when designed in Microsoft Excel and Pro/II. The first part of this thesis will introduce the base case briefly, transition into engineering optimizations and show the results found …

Chemical And Thermal Sintering Of Supported Metals With Emphasis On Cobalt Catalysts During Fischer−Tropsch Synthesis, Mahmood Rahmati, Mohammad-Saeed Safdari, Thomas H. Fletcher, Morris D. Argyle, Calvin H. Bartholomew

Faculty Publications

This comprehensive critical review combines, for the first time, recent advances in nanoscale surface chemistry, surface science, DFT, adsorption calorimetry, and in situ XRD and TEM to provide new insights into catalyst sintering. This work provides qualitative and quantitative estimates of the extent and rate of sintering as functions of nanocrystal (NC) size, temperature, and atmosphere. This review is unique in that besides summarizing important, useful data from previous studies, it also advances the field through addition of (i) improved or new models, (ii) new data summarized in original tables and figures, and (iii) new fundamental perspectives into sintering of …

Numerical And Experimental Analysis Of Air-Cooled Condensers, Kaipo Kekaula

UNLV Theses, Dissertations, Professional Papers, and Capstones

The scope of this project is to numerically and experimentally dry cooling process in air-cooled condensers (ACCs) designed for concentrated solar power (CSP) applications. This effort is driven by the growing economic and political pressure to reduce water consumption during power generation due to limited water resources in the arid geographic climate of the southwestern United States. A computational approach is used in conjunction with experimental validation to gain a more complete understanding of these systems.

Traditionally research into ACCs have been largely limited to air-side heat transfer modelling as it accounts for a large portion of the total thermal …

Advancing Space Flight Medical Care Through On-Demand Protein Therapeutic Production Capabilities, Emily Long Zhao

Utah Space Grant Consortium

Cell-free protein synthesis (CFPS) is an in vitro protein synthesis system that provides a uniquely adaptable platform for protein production. In recent years, lyophilization of CFPS have expanded the capabilities of this system by improving reagent stability outside of cold-chain storage. This project sought to utilize lyophilized CFPS reagents to develop a convenient, shelf-stable, on-demand therapeutic protein production platform. The therapeutic protein production potential of this novel platform was demonstrated by the successful expression of an FDA approved therapeutic protein. With the advancement of shelf-stable, on-demand protein therapeutic production platforms comes the potential to provide point-of-care medical treatment for space-flight …

Peptoid And Antibody-Based Gfp Sensors, Solomon Isu

Graduate Theses and Dissertations

In this work, we have made and characterized a pair of immunobiosensors for detecting the green fluorescent protein (GFP) in an aqueous matrix. An anti-GFP antibody-based biosensor was assembled to detect GFP, while a novel peptoid (N-substituted oligomers of glycine designated as IOS-1) biosensor was also assembled for GFP detection. A quartz crystal microbalance (QCM) gold sensor was used as the supporting substrate for self-assembly of the immunobiosensors. Gravimetric measurements of the QCM gold sensor during immunobiosensor construction and operation were available in real-time using a QCM instrument. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Fluorescence microscopy were used …

Bulk Properties Correlated To The Hydrogen Bond Organization In Dendrimers, Hyperbranched Polymers, And Linear Polymers, Beibei Chen

Dissertations

Although a lot of research was conducted on dendritic polymers, our understanding of their structure-property is still limited. Our previous study, which focused on a family of dendritic polymers based on 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) as a monomer, discovered unique hydrogen bond organizations contributed by their dendritic structures. However, the influence of the H-bond organization on bulk properties has yet to be understood. The goal of this dissertation is to elucidate the correlation between the H-bond organization with the dielectric and volumetric properties of bis-MPA based dendritic polymers, with an emphasis on developing a fundamental understanding of to what extent …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Adrian Damian, Kevin Le, Mary Johnson, Ethan Phan, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective highdensity sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Solution To Exide Technologies Inbatec Inefficiency, Shixuan Hou, Reagan Gilker, Mary Fairley, Spencer Christian, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries. The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …

Pollution Prevention Via Recovery Of Cerium (Iv) Oxide In Optics Company, Eugene Park, William Gallagher, Sydor Optics, Flint Creek Resources

Articles

Pollution prevention methods were applied at an optics manufacturer in an effort to improve recovery of a valuable polishing component, cerium oxide (ceria), 77% of which was lost to dragout and sewer discharge. Centrifugation and microfiltratiion were evaluated to develop a process that would increase recovery of used ceria, which would then be sent back to the ceria supplier for reclamation and reuse. Full-scale implementation included a high-speed centrifuge that operates continuously with a microfiltration system through recirculation in a single process tank. Sydor Optics has improved ceria recovery from 23% to 48%, saving thousands of dollars annually.

Addition Of Fermentation Experiment To Unit Operations Laboratory, Jeremy T. Rone

Electronic Theses and Dissertations

With the growth of the distillery and brewery industries and the potential jobs created for chemical engineers, it is imperative to equip the chemical engineering graduates from the University of Louisville with knowledge of bioreaction kinetics and experience in performing calculations to solve for concentration profiles and reaction rates. To accomplish this, it is recommended to add a fermentation experiment to the Unit Operations Laboratory II course.

Four groups of students from the Spring 2020 Unit Operations Laboratory II course performed the fermentation experiment. They were able to successfully complete all lab requirements as well as analyze the results and …

Labview Improvements And Equipment Redesign Of Unit Operations Distillation Column, Madalyn S Wead

Electronic Theses and Dissertations

Unit Operations labs are important tools to provide hands-on learning with various chemical processes. The distillation lab experiment allows students to connect equations and definitions from textbooks to the physical processes of distillation as they occur. LabVIEW was the software development tool used to create a program to control the distillation column from startup to shutdown. Improvements were made to both the distillation process equipment and the LabVIEW code to create a more interactive lab experience, enhance students’ conceptual understanding of distillation, and prepare students for their future career as chemical engineers.

Equipment addressed included non-linear valves, malfunctioning temperature and …

Determination Of Selenite And Selenate In Wet Flue Gas Desulfurization Process Water Through Ic-Icp-Ms And Hg-Icp-Aes, Samuel Anthony Kelty

Electronic Theses and Dissertations

During coal-fired electric power production, coal bound elemental selenium is released into the gas phase and oxidized to selenite and selenate in the wet flue gas desulfurization (WFGD) unit. Selenite and selenate solubilize in the WFGD process water. A process water system at a coal fired power plant contributes to environmental regulation compliance by removing the selenium species from WFGD process water. A selenium speciation method was developed for the purpose of better monitoring the selenium species present in the “treated” process water and to aid the process water system in meeting compliance with the Environmental Protection Agency’s Effluent Limitation …

Surface Modified Polypropylene Membranes For Treating Hydraulic Fracturing Produced Waters By Membrane Distillation, Tharaka Hawpe Gamage

Graduate Theses and Dissertations

Membrane distillation is an emerging technology for treating hydraulic fracturing flowback and produced waters. Suppression of membrane fouling by inorganic and polar and non-polar organic compounds is a challenge. Here polyhydroxyethyl methacrylate, polyacrylic acid, polvinylallyl imidazolium bromide and polyvinylhexyl imidazolium bromide chains have been grafted from the membrane surface. Fouling is initially due to adsorption of organic compounds followed by scale formation. When challenged with produced water, membranes modified with polvinylallyl imidazolium bromide chains provided the greatest resistance to fouling. For EC pretreated produced water and synthetic produced water that contained mainly inorganic species, the flux decline was much less.

Improving Pv Module Efficiency Through Cooling, Blake Bradley

Chemical Engineering Undergraduate Honors Theses

The Solarbacks researched and designed a variety of cooling methods that could be used to improve the efficiency of photovoltaics. These cooling methods can be separated into two categories: active and passive methods. The active cooling method of hydraulic cooling and the passive cooling methods of heat sinks (fins), optical coatings, thermosyphons, phase change materials, and thermoelectric generators were all taken into consideration as potential cooling methods. Passive cooling methods were preferred because the use of electricity required for the cooling mechanism would reduce the net electricity and subsequent profit from the panels.

Two variations of hydraulic cooling were researched: …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Michelle Dopp, Kevin Le, Ethan Phan, Mary Johnson, Jacqueline Payne, Adrian Damian, Courtney Golman

Chemical Engineering Undergraduate Honors Theses

The Moo Pig Sooie’s researched, designed, and economically analyzed a full-scale adsorption column system to be applied in mining processes that leave high amounts of fluoride in their effluent. This system was designed to remove fluoride from water saturated with calcium sulfate, as calcium sulfate is present in high amounts in certain mining processes. Currently, high density sludge (HDS) is commonly employed to reduce fluoride concentrations, but due to solubility limits the sludge treatment cannot lower fluoride below 10 mg/L (ppm). The current enforceable EPA standard for discharged water is at 4 mg/L (ppm), although mining companies anticipate that this …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Kevin Le, Adrian Damian, Mary Johnson, Ethan Phan, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The team researched, designed, and economically analyzed a full-scale adsorption column system to be applied in mining processes that leave high amounts of fluoride in their effluent. This system was designed to remove fluoride from water saturated with calcium sulfate, as calcium sulfate is present in high amounts in certain mining processes. Currently, high density sludge (HDS) is commonly employed to reduce fluoride concentrations, but due to solubility limits the sludge treatment cannot lower fluoride below 10 mg/L (ppm). The current enforceable EPA standard for discharged water is at 4 mg/L (ppm), although mining companies anticipate that this standard will …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Ethan Phan, Adrian Damian, Kevin Le, Mary Johnson, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective high-density sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …