Biomedical Engineering and Bioengineering Commons^™

Development Of A Tissue Engineered Cardiac Patch, Howard Herbert

All Dissertations

Cardiovascular Disease(CVD) is the leading cause of mortality in the developed world. CVD is most commonly manifested as atherosclerosis of the coronary arteries leading to Myocardial Infarction(MI). After MI, fibrosis of the ventricular wall leads to heart failure(HF), a pandemic affecting 26 million people globally. While therapies are continuously developed to combat HF, the treatment of choice, whole heart transplant, is limited by the availability of donor hearts. It is clear that there is a need to develop a long-term solution to combat HF and its enormous economic burden. Tissue Engineering and Regenerative Medicine holds promise as a possible solution …

Low Resource Assay For Tracking Sars-Cov-2 In Wastewater, Julissa Van Renselaar

All Graduate Theses and Dissertations

Wastewater based epidemiology (WBE) allows for the tracking of nucleic acid of SARS-CoV-2 in wastewater which gives the opportunity for the public and government officials to be informed about the infectivity of the virus in a community. Advances have been made in WBE that have allowed for higher performance, lower resource use, and faster turnaround time. An adapted concentration method of spin column direct extraction has yielded a proxy virus recovery of 83%, consumable cost of $2.01 per sample, and a turnaround time of 0.33 hour/sample. Other concentration methods have lower proxy virus recoveries, comparable cost, and comparable turnaround time. …

Highly Adherent Antimicrobial Coatings For Orthopedic Implants, Mikhail Bredikhin

All Dissertations

Fracture-related infections (FRIs) are the most devasting sort of complications associated with fracture fixation devices, as they lead to patients’ morbidity, prolonged hospitalization, amputations, and even death.External fixators additionally suffer from pin site infections (PSIs), which initiate at the skin entry points of the skin-metallic pin interface present in the external fixation of the damaged bones, often causing deep tissue infection and osteomyelitis. Small percutaneous pins, commonly known as Kirschner wires (K-wires), are used to treat complex fractures and deformities.They are drilled inside the diseased bone for the healing period and are left protruding outside the skin for fixation adjustments …

Investigating Spatial Heterogeneity In Myocardial Wound Environments To Improve Therapy, Michael Potter

All Dissertations

Heart failure is a broad pathology manifestation categorized by an inability of the heart to successfully pump blood throughout the vast vessel network of the body. Within the United States, heart failure is projected to increase by approximately 46% from 2012 to 2030. Modalities of heart failure are generally related to wall mechanics that are impacted following myocardial infarction events. Interplay exists between the wall mechanics, responding cell populations, and the spatial heterogeneities in the resultant scar. This interplay directs the myocardium towards heart failure modalities governed by overly stiff or compliant states. It is essential to elucidate details underlying …

Neroimaging Of Brain Activaion Using Diffuse Optical Tomography, Jingyu Huang

USF Tampa Graduate Theses and Dissertations

This research has two parts. The first part focuses on the use of non-invasive imaging technique, diffuse optical tomography (DOT), to study the brain activation during the stimulation in the clinical room. It further extends the application of DOT by using it to monitor the hemodynamic response during the TMS stimulation in different parameters. Diffuse optical tomography (DOT) is based on NIR light that exploits the relative transparency of biological tissue. The part two and three extends the application in the hospital for delirium patient study and arm muscle dystrophy by adding the sources and detectors to monitor the brain …

Transcriptomic Analysis Of A 3d Blood-Brain Barrier Model Exposed To Disturbed Fluid Flow., Nesrine Bouhrira, Brandon J Deore, Kiet A Tran, Peter Galie

Henry M. Rowan College of Engineering Faculty Scholarship

Cerebral aneurysms are more likely to form at bifurcations in the vasculature, where disturbed fluid is prevalent due to flow separation at sufficiently high Reynolds numbers. While previous studies have demonstrated that altered shear stress exerted by disturbed flow disrupts endothelial tight junctions, less is known about how these flow regimes alter gene expression in endothelial cells lining the blood-brain barrier. Specifically, the effect of disturbed flow on expression of genes associated with cell-cell and cell-matrix interaction, which likely mediate aneurysm formation, remains unclear. RNA sequencing of immortalized cerebral endothelial cells isolated from the lumen of a 3D blood-brain barrier …

Recombinant Human Plasma Gelsolin Reverses Increased Permeability Of The Blood-Brain Barrier Induced By The Spike Protein Of The Sars-Cov-2 Virus., Łukasz Suprewicz, Kiet A Tran, Ewelina Piktel, Krzysztof Fiedoruk, Paul A Janmey, Peter Galie, Robert Bucki

Henry M. Rowan College of Engineering Faculty Scholarship

BACKGROUND: Plasma gelsolin (pGSN) is an important part of the blood actin buffer that prevents negative consequences of possible F-actin deposition in the microcirculation and has various functions during host immune response. Recent reports reveal that severe COVID-19 correlates with reduced levels of pGSN. Therefore, using an in vitro system, we investigated whether pGSN could attenuate increased permeability of the blood-brain barrier (BBB) during its exposure to the portion of the SARS-CoV-2 spike protein containing the receptor binding domain (S1 subunit).

MATERIALS AND METHODS: Two- and three-dimensional models of the human BBB were constructed using the human cerebral microvascular endothelial …

A Framework For Stable Robot-Environment Interaction Based On The Generalized Scattering Transformation, Kanstantsin Pachkouski

Electronic Thesis and Dissertation Repository

This thesis deals with development and experimental evaluation of control algorithms for stabilization of robot-environment interaction based on the conic systems formalism and scattering transformation techniques. A framework for stable robot-environment interaction is presented and evaluated on a real physical system. The proposed algorithm fundamentally generalizes the conventional passivity-based approaches to the coupled stability problem. In particular, it allows for stabilization of not necessarily passive robot-environment interaction. The framework is based on the recently developed non-planar conic systems formalism and generalized scattering-based stabilization methods. A comprehensive theoretical background on the scattering transformation techniques, planar and non-planar conic systems is presented. …

Image Analysis For Swnt Growth On Shutter Sputtered Catalyst, Rebekah Arias

2022 MME Undergraduate Research Symposium

Carbon Nanotubes (CNTs) have been used in remarkable ways since their discovery in 1991 by Sumio Iijima. Properties such as high thermal conductivity, good mechanical strength, and electrical conductivity are what make CNTs attractive. Some of their applications include water filtration, vehicles, energy storage, and now there is great potential in the biomedical field for CNTs as composites in tissue engineering, therapeutics carrier across the blood-brain barrier, cancer treatment, and much more. The issue that comes with Single-Walled Nanotubes (SWNTs) however is Ostwald ripening of catalyst and low CNT production. It is difficult to control gas parameters for hydrogen and …

Surface Treatment Of Polyester Fabric With Atmospheric Pressure Plasma, Srujana Yellapragada

2022 MME Undergraduate Research Symposium

Polyethylene Terephthalate (PET) fabric, a recycled synthetic fiber, has been frequently studied to innovate increased usage in both the clothing and medical industry. Some include ways to dye the fabric so that it can be commercially used for the purpose of environmental conservation from frequent discard of nonrecyclable fabric. Some biomedical applications involve the application of plasma treatment to reduce bacteria adhesion and improve anti-bacterial properties on the fabric. However, neither has been successful due to a lack of understanding of the surface modification of PET fabric to enable such properties. The hypothesis is that hydrophobicity is an issue in …

Biomimetic Cellulose-Based Biocomposites, Zion Michael

2022 MME Undergraduate Research Symposium

Biological structures such as termite nests, silk worm cocoons and honey bee combs integrate material, structure and form to produce biodegradable polymers and composites. Synthetic production of biomaterials through additive or woven processes has failed to achieve comparable material properties to their natural counterparts. For example, cellulose-based biocomposites have markedly less strength and toughness than cellulose micro and nanofibers found in nature. Termites produce a cellulose-based composite called “Carton” which serves as construction material for their nests. The process by which termites produce Carton is similar to the manufacturing process for electrospun cellulose fibers. Studying how termites produce Carton, a …

Synthesis Of Bone Scaffold For Pediatric Bone Defects Using 3d Printing, Amy M. Ramos-Homs

2022 MME Undergraduate Research Symposium

Pediatric bone defects, requiring surgical interventions and implants, include malignant and nonmalignant bone tumors and trauma fractures. Malignant bone tumors (MBT), such as Osteosarcoma and Ewing sarcoma, are aggressive primary cancers that affect growing adolescent bones (10- to 19-year-olds) and require complex reconstruction due to large bone excision during surgical interventions. Pediatric bone fractures requiring surgical interventions peak in 10- to 14-year-olds and are a major public health concern in the US with an impact on patients, parents, and healthcare costs of approx. 350 billion. These diseases require bone tissue replacement in changing bones.

Bone reconstruction and medical implant design …

Hierarchical Structure And Properties Of The Bone At Nano Level, Farah Hamandi, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Bone is a highly hierarchical complex structure that consists of organic and mineral components represented by collagen molecules (CM) and hydroxyapatite crystals (HAC), respectively. The nanostructure of bone can significantly affect its mechanical properties. There is a lack of understanding how collagen fibrils (CF) in different orientations may affect the mechanical properties of the bone. The objective of this study is to investigate the effect of interaction, orientation, and hydration on atomic models of the bone composed of collagen helix (CH) and HAC, using molecular dynamics simulations and therefrom bone-related disease origins. The results demonstrate that the mechanical properties of …

Electromechanical Effects On Micro And Nano Particles Generated From Drug Delivery Devices And Their Implications In Flow And Deposition Efficiency, Mohammed Ali, Mark Miller

Technology Faculty Publications and Presentations

This experimental investigation was undertaken to quantify the electrostatic charge and aerodynamic size distribution of the medicinal drug particles inhaled through an in-vitro mouth-throat (MT) in order to compare the amount of drugs can be delivered to the human lung while mimicking a patient is either sitting or lying. The MT model is a cadaver-based replica cast of human oral-pharyngeal-laryngeal region. Tested drug aerosols were generated by a commercially available metered dose inhaler (MDI). The MT model was placed inside a humidity (95%) and temperature (37^oC) controlled chamber. Its mouth-inlet was positioned horizontally and vertically to simulate sitting …

Residual Properties Of Silicone (Med-4719) Lead With Leads From Retrieved Devices, Anmar Salih, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Leads are designed for in vivo applications, however, for a definite period of time. In-vivo environment affects the mechanical behavior of implantable devices, therefore, there is a need to evaluate the residual properties of implantable leads used with pacemakers, defibrillator and neuro-stimulators. Silicone (MED-4719) lead is widely used in cardiac implantable electronic devices made by different manufacturers. . We collected 150 devices (with or without leads) from Anatomical Gift Program of the Wright State University. The objective of this study was to investigate the residual properties of Silicone (MED-4719) lead with different in vivo exposure time and compare the properties …

Working Out The Kinks: Creating Solutions To Assist Health Care Workers To Take Vital Signs Through Effective Cable Management, Carl R. Russell Iii, Emily J. Linder, Maya A. Godbole

Purdue Journal of Service-Learning and International Engagement

EPICS (Engineering Projects in Community Service) is a service-learning design program run through Purdue University. It strives to teach students design skills through providing solutions for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. BME (Bio-medical Engineering) is a team within EPICS that strives to serve community partners through biomedical applications. Members of a health care team often spend valuable time organizing cables associated with machines used to take patients’ vital signs. Due to time constraints and the fast-paced work environment, these cables may be mismanaged and damaged. The BME team is working on a …

Mechanical Evaluation Of Gyroid Structures To Combat Orthopaedic Implant Infections, Sydney Hitchon

Electronic Thesis and Dissertation Repository

Treatment of infected orthopaedic implants often require two separate surgeries to clear the infection and install a replacement implant. Current antimicrobial drug delivery methods are inefficient, and each additional surgery increases the physiologic burden on patients, with an increased risk of infection, decreased range of motion and longer recovery times. Porous orthopaedic implants, with adequate strength for permanent implantation and the ability to house and elude more efficient antibiotic delivery systems, could result in a single surgery to treat orthopaedic infections. Therefore, finite element models of porous gyroid structures at different porosities were developed and compared with experimental results. Discrepancies …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Correlating The Macrostructural Variations Of An Ion Gel With Its Carbon Dioxide Sorption Capacity, Tung Nguyen,, Mona Bavarian, Siamak Nejati

Chemical and Biomolecular Engineering -- All Faculty Papers

We report on a direct correlation between the macroscale structural variations and the gas sorption capacities of an ion gel. Here, we chose 1-ethyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide ([Emim][TF₂N]) and poly(vinylidene fluoride)-co-hexafluoropropylene (PVDF-HFP) as the ionic liquid and host polymer, respectively. The CO₂ sorption in the thin films of the IL-polymer was measured using the gravimetric method. The results of our experiment showed that the trend in CO₂ uptake of these mixtures was nonlinearly correlated with the content of IL. Here, we highlight that the variations in the molecular structure of the polymers were the main reason behind …

Modification Of The Tumor Microenvironment Enhances Anti-Pd-1 Immunotherapy In Metastatic Melanoma, Guilan Shi, Megan Scott, Cathryn G. Mangiamele, Richard Heller

Bioelectrics Publications

Resistance to checkpoint-blockade treatments is a challenge in the clinic. Both primary and acquired resistance have become major obstacles, greatly limiting the long-lasting effects and wide application of blockade therapy. Many patients with metastatic melanoma eventually require further therapy. The absence of T-cell infiltration to the tumor site is a well-accepted contributor limiting immune checkpoint inhibitor efficacy. In this study, we combined intratumoral injection of plasmid IL-12 with electrotransfer and anti-PD-1 in metastatic B16F10 melanoma tumor model to increase tumor-infiltrating lymphocytes and improve therapeutic efficacy. We showed that effective anti-tumor responses required a subset of tumor-infiltrating CD8⁺ and CD4 …