Biomedical Devices and Instrumentation Commons^™

Seeing The Big Picture: System Architecture Trends In Endoscopy And Led-Based Hyperspectral Subsystem Intergration, Craig M. Browning

<strong> Theses and Dissertations </strong>

Early-stage colorectal lesions remain difficult to detect. Early development of neoplasia tends to be small (less than 10 mm) and flat and difficult to distinguish from surrounding mucosa. Additionally, optical diagnosis of neoplasia as benign or malignant is problematic. Low rates of detection of these lesions allow for continued growth in the colorectum and increased risk of cancer formation. Therefore, it is crucial to detect neoplasia and other non-neoplastic lesions to determine risk and guide future treatment. Technology for detection needs to enhance contrast of subtle tissue differences in the colorectum and track multiple biomarkers simultaneously. This work implements one …

Dei Without Equity: Lab Coat Culture And Persistent Racism In Bioengineering Laboratories, Janet Canady

Arts & Sciences Electronic Theses and Dissertations

From biased algorithms to discriminatory devices to medical racism, it is clear that biomedical products are created in ways that reproduce racial disparities in access and use. Yet the most common solutions recommended by biomedical research institutions emphasize diversity, equity, and inclusion practices that research has already proven ineffective and sometimes harmful. In fact, labs rarely scrutinize whether and how their research products reflect racial bias, assumptions, or ideals. In this paper, I shift the focus to consider how bioengineering laboratories function as a site in which racial processes contribute to product outcomes. I ask, what are the racial dynamics …

Mechanical Evaluation Of Gyroid Structures To Combat Orthopaedic Implant Infections, Sydney Hitchon

Electronic Thesis and Dissertation Repository

Treatment of infected orthopaedic implants often require two separate surgeries to clear the infection and install a replacement implant. Current antimicrobial drug delivery methods are inefficient, and each additional surgery increases the physiologic burden on patients, with an increased risk of infection, decreased range of motion and longer recovery times. Porous orthopaedic implants, with adequate strength for permanent implantation and the ability to house and elude more efficient antibiotic delivery systems, could result in a single surgery to treat orthopaedic infections. Therefore, finite element models of porous gyroid structures at different porosities were developed and compared with experimental results. Discrepancies …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Master's Theses

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Enabling Daily Tracking Of Individual’S Cognitive State With Eyewear, Soha Rostaminia

Doctoral Dissertations

Research studies show that sleep deprivation causes severe fatigue, impairs attention and decision making, and affects our emotional interpretation of events, which makes it a big threat to public safety, and mental and physical well-being. Hence, it would be most desired if we could continuously measure one’s drowsiness and fatigue level, their emotion while making decisions, and assess their sleep quality in order to provide personalized feedback or actionable behavioral suggestions to modulate sleep pattern and alertness levels with the aim of enhancing performance, well-being, and quality of life. While there have been decades of studies on wearable devices, we …

Unobtrusive Assessment Of Upper-Limb Motor Impairment Using Wearable Inertial Sensors, Brandon R. Oubre

Doctoral Dissertations

Many neurological diseases cause motor impairments that limit autonomy and reduce health-related quality of life. Upper-limb motor impairments, in particular, significantly hamper the performance of essential activities of daily living, such as eating, bathing, and changing clothing. Assessment of impairment is necessary for tracking disease progression, measuring the efficacy of interventions, and informing clinical decision making. Impairment is currently assessed by trained clinicians using semi-quantitative rating scales that are limited by their reliance on subjective, visual assessments. Furthermore, existing scales are often burdensome to administer and do not capture patients' motor performance in home and community settings, resulting in a …

Predicting Insulin Pump Therapy Settings, Riccardo L. Ferraro, David Grijalva, Alex Trahan

SMU Data Science Review

Millions of people live with diabetes worldwide [7]. To mitigate some of the many symptoms associated with diabetes, an estimated 350,000 people in the United States rely on insulin pumps [17]. For many of these people, how effectively their insulin pump performs is the difference between sleeping through the night and a life threatening emergency treatment at a hospital. Three programmed insulin pump therapy settings governing effective insulin pump function are: Basal Rate (BR), Insulin Sensitivity Factor (ISF), and Carbohydrate Ratio (ICR). For many people using insulin pumps, these therapy settings are often not correct, given their physiological needs. While …

Modelling And Evaluation Of Piezoelectric Actuators For Wearable Neck Rehabilitation Devices, Shaemus D. Tracey

Electronic Thesis and Dissertation Repository

Neck pain is the most common neck musculoskeletal disorder, and the fourth leading cause of healthy years lost due to disability in the world. Due to the need of hands-on physical therapy and Canada’s aging population, access to treatment will become highly constrained. Wearable devices that allow at-home rehabilitation address this future limitation. However, few have emerged from the laboratory setting because they are limited by the use of conventional actuators. An overlooked type of actuation technology is that of piezoelectric actuators, more specifically, travelling wave ultrasonic motors (TWUM).

In this work, a clear procedure that outlines how the required …

Abbott Cardiac Electrophysiology Wet Lab Project, Melissa Kurani, Fiona Lynn

Biomedical Engineering: Graduate Reports and Projects

Cardiac mapping systems provide electrophysiologists with pertinent information about ablation treatment plans for patients who suffer from cardiac arrhythmias. This thesis describes the process of designing a functional wet lab that integrates with Abbott’s EnSite Precision 3D Mapping System, with the purpose of providing Cal Poly students and faculty with an opportunity to have a hands-on learning experience with cardiac mapping. This project encompassed a thorough literature review of cardiology, electrophysiology, and in vitro lab systems, followed by the design, manufacturing, and evaluation of a functional and anatomically representative wet lab. This is a continuation of previous master’s projects that …

Potassium And Sodium Sensing Isfet Device And Array, Liam Stephen Hayes

Electrical Engineering

The use of Ion-Sensitive Field Effect Transistors (ISFETs) as a means of testing a person’s potassium concentration in real-time has broad applications in the consumer space. An avid runner could use such a device to keep track of their hydration and salt levels. A hospital could use it for patients who require around-the-clock remote monitoring, and a variation of ISFETs are currently being used as continuous glucose monitors for diabetes patients. While ISFETs are not a new development in the field of microelectronics, their use as wearable devices has recently become relevant. The goal of this project is primarily to …

Interactive Software-Based Modeling For Gait Analysis Of Musculoskeletal Structures, Nada Masood Mirza, Adnan Ali, Mohamad Khairi Ishak

Makara Journal of Technology

Software for interactive musculoskeletal modeling applies diverse scientific and technological concepts to stimulate the movement of musculoskeletal figures. Several tools are available for biomechanical analysis in studying motion and capturing the musculoskeletal representation data to facilitate further evaluation for muscle activation. Musculoskeletal software, such as the OpenSim model, animates, and measures in 3D the structural movement of bones, muscles, joints, ligaments, and such structures in the human body. Users apply graphical interfaces to manipulate the movement science for fast and accurate analysis. OpenSim simulation software features a user-friendly interface to allow the proper clinical application in biomechanics and rehabilitation research. …

The Development Of A Motion Sensing Device For Use In A Home Setting, Jaspreet K. Kalsi

Electronic Thesis and Dissertation Repository

Parkinson's disease (PD) is the second most prevalent neurodegenerative disease, with over 10 million individuals diagnosed with PD world-wide. The most common symptom characterized by PD is tremor. Tremor is an involuntary oscillatory motion that most prominently occurs in upper limb, specifically in the hand and wrist that has a measurable frequency and amplitude. This thesis aims to evaluate the usability and functionality of a tremor sensing device designed to collect quantitative data on individuals with PD. The designed device uses 23 commercially-available inertial measuring units (IMUs) located between 21 joints: distal interphalangeal (DIP) joints, proximal interphalangeal (PIP) joints, Interphalangeal …

Tca Fabrication Devices, Brendan R. Difabio

Undergraduate Student Research Internships Conference

Twisted coil actuators are a recent technology that has different properties from popular actuators used today. Being so new, there is still much to learn about these actuators. This project aims to create devices that can be used to make the fabrication process simple and repeatable.

Producing And Measuring Oscillatory Shear In A Novel Microfluidic Chip, Sanaz Lordfard, Daniel Lorusso, Tamie L. Poepping, Hristo N Nikolov, Kayla Soon, Stephen Sims, Jeffrey Dixon, David Holdsworth

Undergraduate Student Research Internships Conference

Purpose: To demonstrate the effectiveness of a novel microfluidic device mimicking oscillatory blood flow, allowing cell biologists to examine how endothelial cells respond to a range of oscillatory shear stress levels.

Methods: The microfluidic chip consists of a circular-shaped reservoir, leading to a rectangular channel that is examined under a microscope. The plunger is connected to a speaker system and oscilloscope, allowing the plunger to apply a range of frequencies (5-60Hz) and voltages (5-10 V, leading to a variety in oscillation amplitudes) to the reservoir region. 1.1 um fluorescent particles diluted in distilled water were used for tracking. Processing was …

Continuous, Non-Destructive Detection Of Surface Bacterial Growth With Bioinspired Vascularized Polymers, Brandon Dixon

Electronic Theses and Dissertations

Reducing or eliminating bacteria on surfaces is vital for medical devices, drinking water quality, and industrial processes. Evaluating surface bacterial growth at buried interfaces can be problematic due to the time-consuming disassembly process required for obtaining standard surface samples. In this work, a continuous, non-destructive, and reusable method was developed to detect surface bacterial growth at buried interfaces. Inspired by vascular systems in nature that permit chemical communication between the surface and underlying tissues of an organism, bacterial-specific signals diffusing from cells on the surface were detected in channels filled with an inert carrier fluid embedded in a polymer matrix. …

A Rapid And Ultra-Sensitive Biosensing Platform Based On Tunable Dielectrophoresis For Robust Poc Applications, Yu Jiang

Doctoral Dissertations

With the ongoing pandemic, there have been increasing concerns recently regarding major public health issues such as abuse of organophosphorus compounds, pathogenic bacterial infections, and biosecurity in agricultural production. Biosensors have long been considered a kernel technology for next-generation diagnostic solutions to improve food safety and public health. Significant amounts of effort have been devoted to inventing novel sensing mechanisms, modifying their designs, improving their performance, and extending their application scopes. However, the reliability and selectivity of most biosensors still have much to be desired, which holds back the development and commercialization of biosensors, especially for on-site and point-of-care (POC) …

Restoring An Iso:5840-Compliant Pulse Duplicator Device For Hydrodynamic Performance Characterization Of Artificial Cardiac Valves, Denver Eagar

Biomedical Engineering Undergraduate Honors Theses

During the summer of 2021, I was employed as an intern at Dynatek Labs, an implantable prosthetics testing company located in southern Missouri. My primary project was to modernize an abandoned pulse duplicator device and protocol to allow the company to re-enter a market area which they left nearly 15 years prior: heart valve testing. The company halted this initiative due to changes in international testing standards in previous years. The International Standards Organization Cardiac Valves Working Group released the latest version of standards concerning artificial heart valve testing (ISO 5840) in January of 2021. Accordingly, my project required that …

Development Of A Decellularized Hydrogel Composite And Its Application In A Novel Model Of Disc-Associated Low Back Pain In Female Sprague Dawley Rats, David Lillyman

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Chronic low back pain is a global socioeconomic crisis compounded by an absence of reliable, curative treatments. The predominant pathology associated with chronic low back pain is degeneration of intervertebral discs in the lumbar spine. During degeneration, nerves can sprout into the intervertebral disc tissue and be chronically subjected to inflammatory and mechanical stimuli, resulting in pain. Pain arising from the intervertebral disc, or disc-associated pain, is a complex, multi-faceted disorder which necessitates valid animal models to screen therapeutics and study pathomechanisms of pain.

While many research teams have created animal models of disc degeneration, the translation of these platforms …

Motion And Crosslinked Polyethylene Wear In Reverse Total Shoulder Arthroplasty, Christopher Millward

Electronic Thesis and Dissertation Repository

The reverse total shoulder arthroplasty (RTSA) has quickly grown to become the most commonly used shoulder arthroplasty design; however, reports have shown evidence of RTSA failures related to polyethylene wear and damage. Therefore, the present work investigated the wear of crosslinked polyethylene (XLPE) in environments similar to that of an in vivo RTSA. Additionally, a computational model was developed based on a previous study of the shoulder motions obtained from a selection of typical patients with RTSA. This model quantified the amount of glenohumeral motion that an RTSA may be subjected to in vivo and provided an approximate value for …